Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 406:439874690f85 Improment_NVM

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Bugfix Min max values for device data checks: Devicedata was set to it lower limit in case of a lower invalid value and upper limit in case a bigger value was detected. This could cause the history memory to be set to a min / max limit and never beeing updated again => Implemented a selection to specify which limit shall be used as default. Minor change: "header" was used as global as well as as local variable => changed name for global variant to gheader. Operation hours were not updated =>adde check for opeartion hours
author ideenmodellierer
date Sun, 12 Jan 2020 17:57:11 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit