Mercurial > public > ostc4
view wiki/Using OpenSTM32.md @ 757:39ff186b6f98
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
The DiveO2 sensor provides a status information which may be used to identify if the value is valid or not. The sensor does not provide a voltage => to have a value for the voltage the value of the ppo2 is taken (equals calibration coeff of 1). For the analog out of bounds detection this value is too high and the DiveO2 is marked as out of bounds. To avoid this problem DiveO2 sensors are now excluded from the analog out of bounds detection.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 07 Mar 2023 22:14:20 +0100 |
| parents | 0e7c16dd774d |
| children |
line wrap: on
line source
# Using OpenSTM32 IDE to Compile OSTC4 Firmware # The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer. You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 1. Register on http://www.openstm32.org/ : that will allows you to download the IDE. 2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux). 3. Use the ready made project ... in ... Or you can create a brand new project by following the _How To_'s: - [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md) - [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md) - [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md) - [HowTo generate uploadable firmware file](Make Firmware File.md)