Mercurial > public > ostc4
view OtherSources/data_exchange_main_mini.c @ 757:39ff186b6f98
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
The DiveO2 sensor provides a status information which may be used to identify if the value is valid or not. The sensor does not provide a voltage => to have a value for the voltage the value of the ppo2 is taken (equals calibration coeff of 1). For the analog out of bounds detection this value is too high and the DiveO2 is marked as out of bounds. To avoid this problem DiveO2 sensors are now excluded from the analog out of bounds detection.
author | Ideenmodellierer |
---|---|
date | Tue, 07 Mar 2023 22:14:20 +0100 |
parents | 7801c5d8a562 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file data_exchange_main.c * @author heinrichs weikamp gmbh * @date 13-Oct-2014 * @version V0.0.2 * @since 27-May-2015 * @brief Communication with the second CPU == RTE system * @verbatim ============================================================================== ##### How to use ##### ============================================================================== ============================================================================== ##### Device Data ##### ============================================================================== main CPU always sends the device data info that it has at the moment on start it is INT32_MIN, INT32_MAX and 0 as initialized in data_central.c variable declaration second small CPU gets request to send its device data on receiption the data is merged with the data in externLogbookFlash, stored on the externLogbookFlash and from now on send to small CPU @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include <string.h> // for memcopy #include "stm32f4xx_hal.h" #include "stdio.h" #include "ostc.h" #include "data_central.h" #include "data_exchange_main.h" #include "base.h" #include "externLogbookFlash.h" /* Expoted variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ SDataReceiveFromMaster dataOut; SDataExchangeSlaveToMaster dataIn; uint8_t data_old__lost_connection_to_slave_counter_temp = 0; /* Private types -------------------------------------------------------------*/ uint8_t DataEX_check_header_and_footer_ok(void); void DataEX_control_connection_while_asking_for_sleep(void); /* Exported functions --------------------------------------------------------*/ uint8_t DataEX_call(void) { DataEX_control_connection_while_asking_for_sleep(); for(int i=0;i<EXCHANGE_BUFFERSIZE;i++) *(uint8_t *)(((uint32_t)&dataOut) + i) = 0; dataOut.mode = MODE_SHUTDOWN; dataOut.header.checkCode[0] = 0xBB; dataOut.header.checkCode[1] = 0x01; dataOut.header.checkCode[2] = 0x01; dataOut.header.checkCode[3] = 0xBB; dataOut.footer.checkCode[0] = 0xF4; dataOut.footer.checkCode[1] = 0xF3; dataOut.footer.checkCode[2] = 0xF2; dataOut.footer.checkCode[3] = 0xF1; HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); delayMicros(10); if(data_old__lost_connection_to_slave_counter_temp >= 3) { data_old__lost_connection_to_slave_counter_temp = 0; } else { HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); } HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)&dataOut, (uint8_t *)&dataIn, EXCHANGE_BUFFERSIZE+1); return 1; } void DataEX_control_connection_while_asking_for_sleep(void) { if(!DataEX_check_header_and_footer_ok()) { data_old__lost_connection_to_slave_counter_temp += 1; } } uint8_t DataEX_check_header_and_footer_ok(void) { if(dataIn.header.checkCode[0] != 0xA1) return 0; if(dataIn.header.checkCode[1] != 0xA2) return 0; if(dataIn.header.checkCode[2] != 0xA3) return 0; if(dataIn.header.checkCode[3] != 0xA4) return 0; if(dataIn.footer.checkCode[0] != 0xE1) return 0; if(dataIn.footer.checkCode[1] != 0xE2) return 0; if(dataIn.footer.checkCode[2] != 0xE3) return 0; if(dataIn.footer.checkCode[3] != 0xE4) return 0; return 1; }