view Documentations/dump-disc.cfg @ 957:3420e3ba698d Evo_2_23

External sensor commands: Add sensor ID to command: In the previous version a command was send without information regarding the target sensor. To have the possibility in future to e.g. calibrate a specific sensor, the sensor ID is now transmitted together with the command. As example in the new implementation the O2 Sensor selected in the sensor menu will blink to enable sensor identification.
author Ideenmodellierer
date Mon, 06 Jan 2025 20:06:35 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit