Mercurial > public > ostc4
view wiki/Using OpenSTM32.md @ 952:33e24b77cc6c Evo_2_23
Bugfix ppo2 high/low check in OC mode:
The fallback option which is used in CC mode was applied to the OC mode as well. As result the check could be deactivated depending on the fallback state, even if a OC dive is performed. now the check will always be performed if the dive mode is OC.
Added vibration warning:
The internal buzzer of the GPIO_V2 may now be used as additional warning notificator. It can be activated using the check button in the customer view menu. The vibration will be active while the warning message is displayed in the dive window. In case the diver is in the menu then the warning will be active for a shorter duration.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 29 Dec 2024 18:33:02 +0100 |
| parents | 0e7c16dd774d |
| children |
line wrap: on
line source
# Using OpenSTM32 IDE to Compile OSTC4 Firmware # The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer. You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 1. Register on http://www.openstm32.org/ : that will allows you to download the IDE. 2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux). 3. Use the ready made project ... in ... Or you can create a brand new project by following the _How To_'s: - [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md) - [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md) - [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md) - [HowTo generate uploadable firmware file](Make Firmware File.md)