Mercurial > public > ostc4

view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_bus.h @ 322:31e471d60797 O2_SensorSync

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Added start of frame detection for HUD data In the previous impmenentation the reception and evaluation of 15 byte were used without start detection. As a result sensor data could be stuck in case the frame sequence does not match the structure (e.g. cause by an framing error). To resolve this in case of an invalid checksumme in combination with a data lost detection a byte based reception is startet to detect the start of a frame using the break between two transmissions. In addition a babbling idiot protecting has been added because a faulty hardware could have an impact on the OSTC operation (high interrupt load)
author ideenmodellierer
date Sun, 30 Jun 2019 21:25:58 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_ll_bus.h
  * @author  MCD Application Team
  * @brief   Header file of BUS LL module.

  @verbatim
                      ##### RCC Limitations #####
  ==============================================================================
    [..]
      A delay between an RCC peripheral clock enable and the effective peripheral
      enabling should be taken into account in order to manage the peripheral read/write
      from/to registers.
      (+) This delay depends on the peripheral mapping.
        (++) AHB & APB peripherals, 1 dummy read is necessary

    [..]
      Workarounds:
      (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
          inserted in each LL_{BUS}_GRP{x}_EnableClock() function.

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_BUS_H
#define __STM32F4xx_LL_BUS_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"

/** @addtogroup STM32F4xx_LL_Driver
  * @{
  */

#if defined(RCC)

/** @defgroup BUS_LL BUS
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
  * @{
  */

/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH  AHB1 GRP1 PERIPH
  * @{
  */
#define LL_AHB1_GRP1_PERIPH_ALL             0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_GPIOA           RCC_AHB1ENR_GPIOAEN
#define LL_AHB1_GRP1_PERIPH_GPIOB           RCC_AHB1ENR_GPIOBEN
#define LL_AHB1_GRP1_PERIPH_GPIOC           RCC_AHB1ENR_GPIOCEN
#if defined(GPIOD)
#define LL_AHB1_GRP1_PERIPH_GPIOD           RCC_AHB1ENR_GPIODEN
#endif /* GPIOD */
#if defined(GPIOE)
#define LL_AHB1_GRP1_PERIPH_GPIOE           RCC_AHB1ENR_GPIOEEN
#endif /* GPIOE */
#if defined(GPIOF)
#define LL_AHB1_GRP1_PERIPH_GPIOF           RCC_AHB1ENR_GPIOFEN
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_AHB1_GRP1_PERIPH_GPIOG           RCC_AHB1ENR_GPIOGEN
#endif /* GPIOG */
#if defined(GPIOH)
#define LL_AHB1_GRP1_PERIPH_GPIOH           RCC_AHB1ENR_GPIOHEN
#endif /* GPIOH */
#if defined(GPIOI)
#define LL_AHB1_GRP1_PERIPH_GPIOI           RCC_AHB1ENR_GPIOIEN
#endif /* GPIOI */
#if defined(GPIOJ)
#define LL_AHB1_GRP1_PERIPH_GPIOJ           RCC_AHB1ENR_GPIOJEN
#endif /* GPIOJ */
#if defined(GPIOK)
#define LL_AHB1_GRP1_PERIPH_GPIOK           RCC_AHB1ENR_GPIOKEN
#endif /* GPIOK */
#define LL_AHB1_GRP1_PERIPH_CRC             RCC_AHB1ENR_CRCEN
#if defined(RCC_AHB1ENR_BKPSRAMEN)
#define LL_AHB1_GRP1_PERIPH_BKPSRAM         RCC_AHB1ENR_BKPSRAMEN
#endif /* RCC_AHB1ENR_BKPSRAMEN */
#if defined(RCC_AHB1ENR_CCMDATARAMEN)
#define LL_AHB1_GRP1_PERIPH_CCMDATARAM      RCC_AHB1ENR_CCMDATARAMEN
#endif /* RCC_AHB1ENR_CCMDATARAMEN */
#define LL_AHB1_GRP1_PERIPH_DMA1            RCC_AHB1ENR_DMA1EN
#define LL_AHB1_GRP1_PERIPH_DMA2            RCC_AHB1ENR_DMA2EN
#if defined(RCC_AHB1ENR_RNGEN)
#define LL_AHB1_GRP1_PERIPH_RNG             RCC_AHB1ENR_RNGEN
#endif /* RCC_AHB1ENR_RNGEN */
#if defined(DMA2D)
#define LL_AHB1_GRP1_PERIPH_DMA2D           RCC_AHB1ENR_DMA2DEN
#endif /* DMA2D */
#if defined(ETH)
#define LL_AHB1_GRP1_PERIPH_ETHMAC          RCC_AHB1ENR_ETHMACEN
#define LL_AHB1_GRP1_PERIPH_ETHMACTX        RCC_AHB1ENR_ETHMACTXEN
#define LL_AHB1_GRP1_PERIPH_ETHMACRX        RCC_AHB1ENR_ETHMACRXEN
#define LL_AHB1_GRP1_PERIPH_ETHMACPTP       RCC_AHB1ENR_ETHMACPTPEN
#endif /* ETH */
#if defined(USB_OTG_HS)
#define LL_AHB1_GRP1_PERIPH_OTGHS           RCC_AHB1ENR_OTGHSEN
#define LL_AHB1_GRP1_PERIPH_OTGHSULPI       RCC_AHB1ENR_OTGHSULPIEN
#endif /* USB_OTG_HS */
#define LL_AHB1_GRP1_PERIPH_FLITF           RCC_AHB1LPENR_FLITFLPEN
#define LL_AHB1_GRP1_PERIPH_SRAM1           RCC_AHB1LPENR_SRAM1LPEN
#if defined(RCC_AHB1LPENR_SRAM2LPEN)
#define LL_AHB1_GRP1_PERIPH_SRAM2           RCC_AHB1LPENR_SRAM2LPEN
#endif /* RCC_AHB1LPENR_SRAM2LPEN */
#if defined(RCC_AHB1LPENR_SRAM3LPEN)
#define LL_AHB1_GRP1_PERIPH_SRAM3           RCC_AHB1LPENR_SRAM3LPEN
#endif /* RCC_AHB1LPENR_SRAM3LPEN */
/**
  * @}
  */

#if defined(RCC_AHB2_SUPPORT)
/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH  AHB2 GRP1 PERIPH
  * @{
  */
#define LL_AHB2_GRP1_PERIPH_ALL            0xFFFFFFFFU
#if defined(DCMI)
#define LL_AHB2_GRP1_PERIPH_DCMI           RCC_AHB2ENR_DCMIEN
#endif /* DCMI */
#if defined(CRYP)
#define LL_AHB2_GRP1_PERIPH_CRYP           RCC_AHB2ENR_CRYPEN
#endif /* CRYP */
#if defined(AES)
#define LL_AHB2_GRP1_PERIPH_AES            RCC_AHB2ENR_AESEN
#endif /* AES */
#if defined(HASH)
#define LL_AHB2_GRP1_PERIPH_HASH           RCC_AHB2ENR_HASHEN
#endif /* HASH */
#if defined(RCC_AHB2ENR_RNGEN)
#define LL_AHB2_GRP1_PERIPH_RNG            RCC_AHB2ENR_RNGEN
#endif /* RCC_AHB2ENR_RNGEN */
#if defined(USB_OTG_FS)
#define LL_AHB2_GRP1_PERIPH_OTGFS          RCC_AHB2ENR_OTGFSEN
#endif /* USB_OTG_FS */
/**
  * @}
  */
#endif /* RCC_AHB2_SUPPORT */

#if defined(RCC_AHB3_SUPPORT)
/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH  AHB3 GRP1 PERIPH
  * @{
  */
#define LL_AHB3_GRP1_PERIPH_ALL            0xFFFFFFFFU
#if defined(FSMC_Bank1)
#define LL_AHB3_GRP1_PERIPH_FSMC           RCC_AHB3ENR_FSMCEN
#endif /* FSMC_Bank1 */
#if defined(FMC_Bank1)
#define LL_AHB3_GRP1_PERIPH_FMC            RCC_AHB3ENR_FMCEN
#endif /* FMC_Bank1 */
#if defined(QUADSPI)
#define LL_AHB3_GRP1_PERIPH_QSPI           RCC_AHB3ENR_QSPIEN
#endif /* QUADSPI */
/**
  * @}
  */
#endif /* RCC_AHB3_SUPPORT */

/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH  APB1 GRP1 PERIPH
  * @{
  */
#define LL_APB1_GRP1_PERIPH_ALL            0xFFFFFFFFU
#if defined(TIM2)
#define LL_APB1_GRP1_PERIPH_TIM2           RCC_APB1ENR_TIM2EN
#endif /* TIM2 */
#if defined(TIM3)
#define LL_APB1_GRP1_PERIPH_TIM3           RCC_APB1ENR_TIM3EN
#endif /* TIM3 */
#if defined(TIM4)
#define LL_APB1_GRP1_PERIPH_TIM4           RCC_APB1ENR_TIM4EN
#endif /* TIM4 */
#define LL_APB1_GRP1_PERIPH_TIM5           RCC_APB1ENR_TIM5EN
#if defined(TIM6)
#define LL_APB1_GRP1_PERIPH_TIM6           RCC_APB1ENR_TIM6EN
#endif /* TIM6 */
#if defined(TIM7)
#define LL_APB1_GRP1_PERIPH_TIM7           RCC_APB1ENR_TIM7EN
#endif /* TIM7 */
#if defined(TIM12)
#define LL_APB1_GRP1_PERIPH_TIM12          RCC_APB1ENR_TIM12EN
#endif /* TIM12 */
#if defined(TIM13)
#define LL_APB1_GRP1_PERIPH_TIM13          RCC_APB1ENR_TIM13EN
#endif /* TIM13 */
#if defined(TIM14)
#define LL_APB1_GRP1_PERIPH_TIM14          RCC_APB1ENR_TIM14EN
#endif /* TIM14 */
#if defined(LPTIM1)
#define LL_APB1_GRP1_PERIPH_LPTIM1         RCC_APB1ENR_LPTIM1EN
#endif /* LPTIM1 */
#if defined(RCC_APB1ENR_RTCAPBEN)
#define LL_APB1_GRP1_PERIPH_RTCAPB         RCC_APB1ENR_RTCAPBEN
#endif /* RCC_APB1ENR_RTCAPBEN */
#define LL_APB1_GRP1_PERIPH_WWDG           RCC_APB1ENR_WWDGEN
#if defined(SPI2)
#define LL_APB1_GRP1_PERIPH_SPI2           RCC_APB1ENR_SPI2EN
#endif /* SPI2 */
#if defined(SPI3)
#define LL_APB1_GRP1_PERIPH_SPI3           RCC_APB1ENR_SPI3EN
#endif /* SPI3 */
#if defined(SPDIFRX)
#define LL_APB1_GRP1_PERIPH_SPDIFRX        RCC_APB1ENR_SPDIFRXEN
#endif /* SPDIFRX */
#define LL_APB1_GRP1_PERIPH_USART2         RCC_APB1ENR_USART2EN
#if defined(USART3)
#define LL_APB1_GRP1_PERIPH_USART3         RCC_APB1ENR_USART3EN
#endif /* USART3 */
#if defined(UART4)
#define LL_APB1_GRP1_PERIPH_UART4          RCC_APB1ENR_UART4EN
#endif /* UART4 */
#if defined(UART5)
#define LL_APB1_GRP1_PERIPH_UART5          RCC_APB1ENR_UART5EN
#endif /* UART5 */
#define LL_APB1_GRP1_PERIPH_I2C1           RCC_APB1ENR_I2C1EN
#define LL_APB1_GRP1_PERIPH_I2C2           RCC_APB1ENR_I2C2EN
#if defined(I2C3)
#define LL_APB1_GRP1_PERIPH_I2C3           RCC_APB1ENR_I2C3EN
#endif /* I2C3 */
#if defined(FMPI2C1)
#define LL_APB1_GRP1_PERIPH_FMPI2C1        RCC_APB1ENR_FMPI2C1EN
#endif /* FMPI2C1 */
#if defined(CAN1)
#define LL_APB1_GRP1_PERIPH_CAN1           RCC_APB1ENR_CAN1EN
#endif /* CAN1 */
#if defined(CAN2)
#define LL_APB1_GRP1_PERIPH_CAN2           RCC_APB1ENR_CAN2EN
#endif /* CAN2 */
#if defined(CAN3)
#define LL_APB1_GRP1_PERIPH_CAN3           RCC_APB1ENR_CAN3EN
#endif /* CAN3 */
#if defined(CEC)
#define LL_APB1_GRP1_PERIPH_CEC            RCC_APB1ENR_CECEN
#endif /* CEC */
#define LL_APB1_GRP1_PERIPH_PWR            RCC_APB1ENR_PWREN
#if defined(DAC1)
#define LL_APB1_GRP1_PERIPH_DAC1           RCC_APB1ENR_DACEN
#endif /* DAC1 */
#if defined(UART7)
#define LL_APB1_GRP1_PERIPH_UART7          RCC_APB1ENR_UART7EN
#endif /* UART7 */
#if defined(UART8)
#define LL_APB1_GRP1_PERIPH_UART8          RCC_APB1ENR_UART8EN
#endif /* UART8 */
/**
  * @}
  */

/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH  APB2 GRP1 PERIPH
  * @{
  */
#define LL_APB2_GRP1_PERIPH_ALL          0xFFFFFFFFU
#define LL_APB2_GRP1_PERIPH_TIM1         RCC_APB2ENR_TIM1EN
#if defined(TIM8)
#define LL_APB2_GRP1_PERIPH_TIM8         RCC_APB2ENR_TIM8EN
#endif /* TIM8 */
#define LL_APB2_GRP1_PERIPH_USART1       RCC_APB2ENR_USART1EN
#if defined(USART6)
#define LL_APB2_GRP1_PERIPH_USART6       RCC_APB2ENR_USART6EN
#endif /* USART6 */
#if defined(UART9)
#define LL_APB2_GRP1_PERIPH_UART9        RCC_APB2ENR_UART9EN
#endif /* UART9 */
#if defined(UART10)
#define LL_APB2_GRP1_PERIPH_UART10       RCC_APB2ENR_UART10EN
#endif /* UART10 */
#define LL_APB2_GRP1_PERIPH_ADC1         RCC_APB2ENR_ADC1EN
#if defined(ADC2)
#define LL_APB2_GRP1_PERIPH_ADC2         RCC_APB2ENR_ADC2EN
#endif /* ADC2 */
#if defined(ADC3)
#define LL_APB2_GRP1_PERIPH_ADC3         RCC_APB2ENR_ADC3EN
#endif /* ADC3 */
#if defined(SDIO)
#define LL_APB2_GRP1_PERIPH_SDIO         RCC_APB2ENR_SDIOEN
#endif /* SDIO */
#define LL_APB2_GRP1_PERIPH_SPI1         RCC_APB2ENR_SPI1EN
#if defined(SPI4)
#define LL_APB2_GRP1_PERIPH_SPI4         RCC_APB2ENR_SPI4EN
#endif /* SPI4 */
#define LL_APB2_GRP1_PERIPH_SYSCFG       RCC_APB2ENR_SYSCFGEN
#if defined(RCC_APB2ENR_EXTITEN)
#define LL_APB2_GRP1_PERIPH_EXTI         RCC_APB2ENR_EXTITEN
#endif /* RCC_APB2ENR_EXTITEN */
#define LL_APB2_GRP1_PERIPH_TIM9         RCC_APB2ENR_TIM9EN
#if defined(TIM10)
#define LL_APB2_GRP1_PERIPH_TIM10        RCC_APB2ENR_TIM10EN
#endif /* TIM10 */
#define LL_APB2_GRP1_PERIPH_TIM11        RCC_APB2ENR_TIM11EN
#if defined(SPI5)
#define LL_APB2_GRP1_PERIPH_SPI5         RCC_APB2ENR_SPI5EN
#endif /* SPI5 */
#if defined(SPI6)
#define LL_APB2_GRP1_PERIPH_SPI6         RCC_APB2ENR_SPI6EN
#endif /* SPI6 */
#if defined(SAI1)
#define LL_APB2_GRP1_PERIPH_SAI1         RCC_APB2ENR_SAI1EN
#endif /* SAI1 */
#if defined(SAI2)
#define LL_APB2_GRP1_PERIPH_SAI2         RCC_APB2ENR_SAI2EN
#endif /* SAI2 */
#if defined(LTDC)
#define LL_APB2_GRP1_PERIPH_LTDC         RCC_APB2ENR_LTDCEN
#endif /* LTDC */
#if defined(DSI)
#define LL_APB2_GRP1_PERIPH_DSI          RCC_APB2ENR_DSIEN
#endif /* DSI */
#if defined(DFSDM1_Channel0)
#define LL_APB2_GRP1_PERIPH_DFSDM1       RCC_APB2ENR_DFSDM1EN
#endif /* DFSDM1_Channel0 */
#if defined(DFSDM2_Channel0)
#define LL_APB2_GRP1_PERIPH_DFSDM2       RCC_APB2ENR_DFSDM2EN
#endif /* DFSDM2_Channel0 */
#define LL_APB2_GRP1_PERIPH_ADC          RCC_APB2RSTR_ADCRST
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
  * @{
  */

/** @defgroup BUS_LL_EF_AHB1 AHB1
  * @{
  */

/**
  * @brief  Enable AHB1 peripherals clock.
  * @rmtoll AHB1ENR      GPIOAEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOBEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOCEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIODEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOEEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOFEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOGEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOHEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOIEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOJEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      GPIOKEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      CRCEN              LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      BKPSRAMEN          LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      CCMDATARAMEN       LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      DMA1EN             LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      DMA2EN             LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      RNGEN              LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      DMA2DEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      ETHMACEN           LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      ETHMACTXEN         LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      ETHMACRXEN         LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      ETHMACPTPEN        LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      OTGHSEN            LL_AHB1_GRP1_EnableClock\n
  *         AHB1ENR      OTGHSULPIEN        LL_AHB1_GRP1_EnableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB1ENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Check if AHB1 peripheral clock is enabled or not
  * @rmtoll AHB1ENR      GPIOAEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOBEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOCEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIODEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOEEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOFEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOGEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOHEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOIEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOJEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      GPIOKEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      CRCEN              LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      BKPSRAMEN          LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      CCMDATARAMEN       LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      DMA1EN             LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      DMA2EN             LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      RNGEN              LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      DMA2DEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      ETHMACEN           LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      ETHMACTXEN         LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      ETHMACRXEN         LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      ETHMACPTPEN        LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      OTGHSEN            LL_AHB1_GRP1_IsEnabledClock\n
  *         AHB1ENR      OTGHSULPIEN        LL_AHB1_GRP1_IsEnabledClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
  return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
}

/**
  * @brief  Disable AHB1 peripherals clock.
  * @rmtoll AHB1ENR      GPIOAEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOBEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOCEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIODEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOEEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOFEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOGEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOHEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOIEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOJEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      GPIOKEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      CRCEN              LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      BKPSRAMEN          LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      CCMDATARAMEN       LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      DMA1EN             LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      DMA2EN             LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      RNGEN              LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      DMA2DEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      ETHMACEN           LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      ETHMACTXEN         LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      ETHMACRXEN         LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      ETHMACPTPEN        LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      OTGHSEN            LL_AHB1_GRP1_DisableClock\n
  *         AHB1ENR      OTGHSULPIEN        LL_AHB1_GRP1_DisableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CCMDATARAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB1ENR, Periphs);
}

/**
  * @brief  Force AHB1 peripherals reset.
  * @rmtoll AHB1RSTR     GPIOARST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOBRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOCRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIODRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOERST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOFRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOGRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOHRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOIRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOJRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     GPIOKRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     CRCRST        LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     DMA1RST       LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     DMA2RST       LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     RNGRST        LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     DMA2DRST      LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     ETHMACRST     LL_AHB1_GRP1_ForceReset\n
  *         AHB1RSTR     OTGHSRST      LL_AHB1_GRP1_ForceReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
  SET_BIT(RCC->AHB1RSTR, Periphs);
}

/**
  * @brief  Release AHB1 peripherals reset.
  * @rmtoll AHB1RSTR     GPIOARST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOBRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOCRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIODRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOERST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOFRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOGRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOHRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOIRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOJRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     GPIOKRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     CRCRST        LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     DMA1RST       LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     DMA2RST       LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     RNGRST        LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     DMA2DRST      LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     ETHMACRST     LL_AHB1_GRP1_ReleaseReset\n
  *         AHB1RSTR     OTGHSRST      LL_AHB1_GRP1_ReleaseReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB1RSTR, Periphs);
}

/**
  * @brief  Enable AHB1 peripheral clocks in low-power mode
  * @rmtoll AHB1LPENR    GPIOALPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOBLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOCLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIODLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOELPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOFLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOGLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOHLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOILPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOJLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    GPIOKLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    CRCLPEN        LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    BKPSRAMLPEN    LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    FLITFLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    SRAM1LPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    SRAM2LPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    SRAM3LPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    BKPSRAMLPEN    LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    DMA1LPEN       LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    DMA2LPEN       LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    DMA2DLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    RNGLPEN        LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    ETHMACLPEN     LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    ETHMACTXLPEN   LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    ETHMACRXLPEN   LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    ETHMACPTPLPEN  LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    OTGHSLPEN      LL_AHB1_GRP1_EnableClockLowPower\n
  *         AHB1LPENR    OTGHSULPILPEN  LL_AHB1_GRP1_EnableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB1LPENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Disable AHB1 peripheral clocks in low-power mode
  * @rmtoll AHB1LPENR    GPIOALPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOBLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOCLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIODLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOELPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOFLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOGLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOHLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOILPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOJLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    GPIOKLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    CRCLPEN        LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    BKPSRAMLPEN    LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    FLITFLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    SRAM1LPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    SRAM2LPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    SRAM3LPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    BKPSRAMLPEN    LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    DMA1LPEN       LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    DMA2LPEN       LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    DMA2DLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    RNGLPEN        LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    ETHMACLPEN     LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    ETHMACTXLPEN   LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    ETHMACRXLPEN   LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    ETHMACPTPLPEN  LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    OTGHSLPEN      LL_AHB1_GRP1_DisableClockLowPower\n
  *         AHB1LPENR    OTGHSULPILPEN  LL_AHB1_GRP1_DisableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOJ (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_GPIOK (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_CRC
  *         @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2 (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_SRAM3 (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
  *         @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS (*)
  *         @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB1LPENR, Periphs);
}

/**
  * @}
  */

#if defined(RCC_AHB2_SUPPORT)
/** @defgroup BUS_LL_EF_AHB2 AHB2
  * @{
  */

/**
  * @brief  Enable AHB2 peripherals clock.
  * @rmtoll AHB2ENR      DCMIEN       LL_AHB2_GRP1_EnableClock\n
  *         AHB2ENR      CRYPEN       LL_AHB2_GRP1_EnableClock\n
  *         AHB2ENR      AESEN        LL_AHB2_GRP1_EnableClock\n
  *         AHB2ENR      HASHEN       LL_AHB2_GRP1_EnableClock\n
  *         AHB2ENR      RNGEN        LL_AHB2_GRP1_EnableClock\n
  *         AHB2ENR      OTGFSEN      LL_AHB2_GRP1_EnableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB2ENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Check if AHB2 peripheral clock is enabled or not
  * @rmtoll AHB2ENR      DCMIEN       LL_AHB2_GRP1_IsEnabledClock\n
  *         AHB2ENR      CRYPEN       LL_AHB2_GRP1_IsEnabledClock\n
  *         AHB2ENR      AESEN        LL_AHB2_GRP1_IsEnabledClock\n
  *         AHB2ENR      HASHEN       LL_AHB2_GRP1_IsEnabledClock\n
  *         AHB2ENR      RNGEN        LL_AHB2_GRP1_IsEnabledClock\n
  *         AHB2ENR      OTGFSEN      LL_AHB2_GRP1_IsEnabledClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
  return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
}

/**
  * @brief  Disable AHB2 peripherals clock.
  * @rmtoll AHB2ENR      DCMIEN       LL_AHB2_GRP1_DisableClock\n
  *         AHB2ENR      CRYPEN       LL_AHB2_GRP1_DisableClock\n
  *         AHB2ENR      AESEN        LL_AHB2_GRP1_DisableClock\n
  *         AHB2ENR      HASHEN       LL_AHB2_GRP1_DisableClock\n
  *         AHB2ENR      RNGEN        LL_AHB2_GRP1_DisableClock\n
  *         AHB2ENR      OTGFSEN      LL_AHB2_GRP1_DisableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB2ENR, Periphs);
}

/**
  * @brief  Force AHB2 peripherals reset.
  * @rmtoll AHB2RSTR     DCMIRST      LL_AHB2_GRP1_ForceReset\n
  *         AHB2RSTR     CRYPRST      LL_AHB2_GRP1_ForceReset\n
  *         AHB2RSTR     AESRST       LL_AHB2_GRP1_ForceReset\n
  *         AHB2RSTR     HASHRST      LL_AHB2_GRP1_ForceReset\n
  *         AHB2RSTR     RNGRST       LL_AHB2_GRP1_ForceReset\n
  *         AHB2RSTR     OTGFSRST     LL_AHB2_GRP1_ForceReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
{
  SET_BIT(RCC->AHB2RSTR, Periphs);
}

/**
  * @brief  Release AHB2 peripherals reset.
  * @rmtoll AHB2RSTR     DCMIRST      LL_AHB2_GRP1_ReleaseReset\n
  *         AHB2RSTR     CRYPRST      LL_AHB2_GRP1_ReleaseReset\n
  *         AHB2RSTR     AESRST       LL_AHB2_GRP1_ReleaseReset\n
  *         AHB2RSTR     HASHRST      LL_AHB2_GRP1_ReleaseReset\n
  *         AHB2RSTR     RNGRST       LL_AHB2_GRP1_ReleaseReset\n
  *         AHB2RSTR     OTGFSRST     LL_AHB2_GRP1_ReleaseReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB2RSTR, Periphs);
}

/**
  * @brief  Enable AHB2 peripheral clocks in low-power mode
  * @rmtoll AHB2LPENR    DCMILPEN     LL_AHB2_GRP1_EnableClockLowPower\n
  *         AHB2LPENR    CRYPLPEN     LL_AHB2_GRP1_EnableClockLowPower\n
  *         AHB2LPENR    AESLPEN      LL_AHB2_GRP1_EnableClockLowPower\n
  *         AHB2LPENR    HASHLPEN     LL_AHB2_GRP1_EnableClockLowPower\n
  *         AHB2LPENR    RNGLPEN      LL_AHB2_GRP1_EnableClockLowPower\n
  *         AHB2LPENR    OTGFSLPEN    LL_AHB2_GRP1_EnableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB2LPENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Disable AHB2 peripheral clocks in low-power mode
  * @rmtoll AHB2LPENR    DCMILPEN     LL_AHB2_GRP1_DisableClockLowPower\n
  *         AHB2LPENR    CRYPLPEN     LL_AHB2_GRP1_DisableClockLowPower\n
  *         AHB2LPENR    AESLPEN      LL_AHB2_GRP1_DisableClockLowPower\n
  *         AHB2LPENR    HASHLPEN     LL_AHB2_GRP1_DisableClockLowPower\n
  *         AHB2LPENR    RNGLPEN      LL_AHB2_GRP1_DisableClockLowPower\n
  *         AHB2LPENR    OTGFSLPEN    LL_AHB2_GRP1_DisableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_AES  (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_RNG (*)
  *         @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB2LPENR, Periphs);
}

/**
  * @}
  */
#endif /* RCC_AHB2_SUPPORT */

#if defined(RCC_AHB3_SUPPORT)
/** @defgroup BUS_LL_EF_AHB3 AHB3
  * @{
  */

/**
  * @brief  Enable AHB3 peripherals clock.
  * @rmtoll AHB3ENR      FMCEN         LL_AHB3_GRP1_EnableClock\n
  *         AHB3ENR      FSMCEN        LL_AHB3_GRP1_EnableClock\n
  *         AHB3ENR      QSPIEN        LL_AHB3_GRP1_EnableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB3ENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Check if AHB3 peripheral clock is enabled or not
  * @rmtoll AHB3ENR      FMCEN         LL_AHB3_GRP1_IsEnabledClock\n
  *         AHB3ENR      FSMCEN        LL_AHB3_GRP1_IsEnabledClock\n
  *         AHB3ENR      QSPIEN        LL_AHB3_GRP1_IsEnabledClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
{
  return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
}

/**
  * @brief  Disable AHB3 peripherals clock.
  * @rmtoll AHB3ENR      FMCEN         LL_AHB3_GRP1_DisableClock\n
  *         AHB3ENR      FSMCEN        LL_AHB3_GRP1_DisableClock\n
  *         AHB3ENR      QSPIEN        LL_AHB3_GRP1_DisableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB3ENR, Periphs);
}

/**
  * @brief  Force AHB3 peripherals reset.
  * @rmtoll AHB3RSTR     FMCRST        LL_AHB3_GRP1_ForceReset\n
  *         AHB3RSTR     FSMCRST       LL_AHB3_GRP1_ForceReset\n
  *         AHB3RSTR     QSPIRST       LL_AHB3_GRP1_ForceReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
{
  SET_BIT(RCC->AHB3RSTR, Periphs);
}

/**
  * @brief  Release AHB3 peripherals reset.
  * @rmtoll AHB3RSTR     FMCRST        LL_AHB3_GRP1_ReleaseReset\n
  *         AHB3RSTR     FSMCRST       LL_AHB3_GRP1_ReleaseReset\n
  *         AHB3RSTR     QSPIRST       LL_AHB3_GRP1_ReleaseReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB2_GRP1_PERIPH_ALL
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB3RSTR, Periphs);
}

/**
  * @brief  Enable AHB3 peripheral clocks in low-power mode
  * @rmtoll AHB3LPENR    FMCLPEN       LL_AHB3_GRP1_EnableClockLowPower\n
  *         AHB3LPENR    FSMCLPEN      LL_AHB3_GRP1_EnableClockLowPower\n
  *         AHB3LPENR    QSPILPEN      LL_AHB3_GRP1_EnableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->AHB3LPENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Disable AHB3 peripheral clocks in low-power mode
  * @rmtoll AHB3LPENR    FMCLPEN       LL_AHB3_GRP1_DisableClockLowPower\n
  *         AHB3LPENR    FSMCLPEN      LL_AHB3_GRP1_DisableClockLowPower\n
  *         AHB3LPENR    QSPILPEN      LL_AHB3_GRP1_DisableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_FSMC (*)
  *         @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs)
{
  CLEAR_BIT(RCC->AHB3LPENR, Periphs);
}

/**
  * @}
  */
#endif /* RCC_AHB3_SUPPORT */

/** @defgroup BUS_LL_EF_APB1 APB1
  * @{
  */

/**
  * @brief  Enable APB1 peripherals clock.
  * @rmtoll APB1ENR     TIM2EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM3EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM4EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM5EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM6EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM7EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM12EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM13EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     TIM14EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     LPTIM1EN      LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     WWDGEN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     SPI2EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     SPI3EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     SPDIFRXEN     LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     USART2EN      LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     USART3EN      LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     UART4EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     UART5EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     I2C1EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     I2C2EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     I2C3EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     FMPI2C1EN     LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     CAN1EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     CAN2EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     CAN3EN        LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     CECEN         LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     PWREN         LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     DACEN         LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     UART7EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     UART8EN       LL_APB1_GRP1_EnableClock\n
  *         APB1ENR     RTCAPBEN      LL_APB1_GRP1_EnableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC  (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->APB1ENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Check if APB1 peripheral clock is enabled or not
  * @rmtoll APB1ENR     TIM2EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM3EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM4EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM5EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM6EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM7EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM12EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM13EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     TIM14EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     LPTIM1EN      LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     WWDGEN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     SPI2EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     SPI3EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     SPDIFRXEN     LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     USART2EN      LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     USART3EN      LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     UART4EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     UART5EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     I2C1EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     I2C2EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     I2C3EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     FMPI2C1EN     LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     CAN1EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     CAN2EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     CAN3EN        LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     CECEN         LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     PWREN         LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     DACEN         LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     UART7EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     UART8EN       LL_APB1_GRP1_IsEnabledClock\n
  *         APB1ENR     RTCAPBEN      LL_APB1_GRP1_IsEnabledClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
  *
  *         (*) value not defined in all devices.
  * @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
  return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
}

/**
  * @brief  Disable APB1 peripherals clock.
  * @rmtoll APB1ENR     TIM2EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM3EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM4EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM5EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM6EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM7EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM12EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM13EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     TIM14EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     LPTIM1EN      LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     WWDGEN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     SPI2EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     SPI3EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     SPDIFRXEN     LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     USART2EN      LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     USART3EN      LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     UART4EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     UART5EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     I2C1EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     I2C2EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     I2C3EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     FMPI2C1EN     LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     CAN1EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     CAN2EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     CAN3EN        LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     CECEN         LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     PWREN         LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     DACEN         LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     UART7EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     UART8EN       LL_APB1_GRP1_DisableClock\n
  *         APB1ENR     RTCAPBEN      LL_APB1_GRP1_DisableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB1ENR, Periphs);
}

/**
  * @brief  Force APB1 peripherals reset.
  * @rmtoll APB1RSTR     TIM2RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM3RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM4RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM5RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM6RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM7RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM12RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM13RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     TIM14RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     LPTIM1RST      LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     WWDGRST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     SPI2RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     SPI3RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     SPDIFRXRST     LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     USART2RST      LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     USART3RST      LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     UART4RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     UART5RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     I2C1RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     I2C2RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     I2C3RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     FMPI2C1RST     LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     CAN1RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     CAN2RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     CAN3RST        LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     CECRST         LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     PWRRST         LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     DACRST         LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     UART7RST       LL_APB1_GRP1_ForceReset\n
  *         APB1RSTR     UART8RST       LL_APB1_GRP1_ForceReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
  SET_BIT(RCC->APB1RSTR, Periphs);
}

/**
  * @brief  Release APB1 peripherals reset.
  * @rmtoll APB1RSTR     TIM2RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM3RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM4RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM5RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM6RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM7RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM12RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM13RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     TIM14RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     LPTIM1RST      LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     WWDGRST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     SPI2RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     SPI3RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     SPDIFRXRST     LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     USART2RST      LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     USART3RST      LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     UART4RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     UART5RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     I2C1RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     I2C2RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     I2C3RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     FMPI2C1RST     LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     CAN1RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     CAN2RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     CAN3RST        LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     CECRST         LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     PWRRST         LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     DACRST         LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     UART7RST       LL_APB1_GRP1_ReleaseReset\n
  *         APB1RSTR     UART8RST       LL_APB1_GRP1_ReleaseReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB1RSTR, Periphs);
}

/**
  * @brief  Enable APB1 peripheral clocks in low-power mode
  * @rmtoll APB1LPENR     TIM2LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM3LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM4LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM5LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM6LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM7LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM12LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM13LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     TIM14LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     LPTIM1LPEN      LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     WWDGLPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     SPI2LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     SPI3LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     SPDIFRXLPEN     LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     USART2LPEN      LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     USART3LPEN      LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     UART4LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     UART5LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     I2C1LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     I2C2LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     I2C3LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     FMPI2C1LPEN     LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     CAN1LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     CAN2LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     CAN3LPEN        LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     CECLPEN         LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     PWRLPEN         LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     DACLPEN         LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     UART7LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     UART8LPEN       LL_APB1_GRP1_EnableClockLowPower\n
  *         APB1LPENR     RTCAPBLPEN      LL_APB1_GRP1_EnableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->APB1LPENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->APB1LPENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Disable APB1 peripheral clocks in low-power mode
  * @rmtoll APB1LPENR     TIM2LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM3LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM4LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM5LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM6LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM7LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM12LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM13LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     TIM14LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     LPTIM1LPEN      LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     WWDGLPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     SPI2LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     SPI3LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     SPDIFRXLPEN     LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     USART2LPEN      LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     USART3LPEN      LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     UART4LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     UART5LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     I2C1LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     I2C2LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     I2C3LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     FMPI2C1LPEN     LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     CAN1LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     CAN2LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     CAN3LPEN        LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     CECLPEN         LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     PWRLPEN         LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     DACLPEN         LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     UART7LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     UART8LPEN       LL_APB1_GRP1_DisableClockLowPower\n
  *         APB1LPENR     RTCAPBLPEN      LL_APB1_GRP1_DisableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM5
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_WWDG
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART2
  *         @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C1
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C2
  *         @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_FMPI2C1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CAN3 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_PWR
  *         @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART7 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_UART8 (*)
  *         @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB1LPENR, Periphs);
}

/**
  * @}
  */

/** @defgroup BUS_LL_EF_APB2 APB2
  * @{
  */

/**
  * @brief  Enable APB2 peripherals clock.
  * @rmtoll APB2ENR     TIM1EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     TIM8EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     USART1EN      LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     USART6EN      LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     UART9EN       LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     UART10EN      LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     ADC1EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     ADC2EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     ADC3EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SDIOEN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SPI1EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SPI4EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SYSCFGEN      LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     EXTITEN       LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     TIM9EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     TIM10EN       LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     TIM11EN       LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SPI5EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SPI6EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SAI1EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     SAI2EN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     LTDCEN        LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     DSIEN         LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     DFSDM1EN      LL_APB2_GRP1_EnableClock\n
  *         APB2ENR     DFSDM2EN      LL_APB2_GRP1_EnableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC1
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)

  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->APB2ENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Check if APB2 peripheral clock is enabled or not
  * @rmtoll APB2ENR     TIM1EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     TIM8EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     USART1EN      LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     USART6EN      LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     UART9EN       LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     UART10EN      LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     ADC1EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     ADC2EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     ADC3EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SDIOEN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SPI1EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SPI4EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SYSCFGEN      LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     EXTITEN       LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     TIM9EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     TIM10EN       LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     TIM11EN       LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SPI5EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SPI6EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SAI1EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     SAI2EN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     LTDCEN        LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     DSIEN         LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     DFSDM1EN      LL_APB2_GRP1_IsEnabledClock\n
  *         APB2ENR     DFSDM2EN      LL_APB2_GRP1_IsEnabledClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC1
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
  return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
}

/**
  * @brief  Disable APB2 peripherals clock.
  * @rmtoll APB2ENR     TIM1EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     TIM8EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     USART1EN      LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     USART6EN      LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     UART9EN       LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     UART10EN      LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     ADC1EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     ADC2EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     ADC3EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SDIOEN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SPI1EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SPI4EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SYSCFGEN      LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     EXTITEN       LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     TIM9EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     TIM10EN       LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     TIM11EN       LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SPI5EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SPI6EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SAI1EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     SAI2EN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     LTDCEN        LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     DSIEN         LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     DFSDM1EN      LL_APB2_GRP1_DisableClock\n
  *         APB2ENR     DFSDM2EN      LL_APB2_GRP1_DisableClock
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC1
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB2ENR, Periphs);
}

/**
  * @brief  Force APB2 peripherals reset.
  * @rmtoll APB2RSTR     TIM1RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     TIM8RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     USART1RST      LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     USART6RST      LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     UART9RST       LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     UART10RST      LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     ADCRST         LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SDIORST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SPI1RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SPI4RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SYSCFGRST      LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     TIM9RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     TIM10RST       LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     TIM11RST       LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SPI5RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SPI6RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SAI1RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     SAI2RST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     LTDCRST        LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     DSIRST         LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     DFSDM1RST      LL_APB2_GRP1_ForceReset\n
  *         APB2RSTR     DFSDM2RST      LL_APB2_GRP1_ForceReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_ALL
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
  SET_BIT(RCC->APB2RSTR, Periphs);
}

/**
  * @brief  Release APB2 peripherals reset.
  * @rmtoll APB2RSTR     TIM1RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     TIM8RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     USART1RST      LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     USART6RST      LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     UART9RST       LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     UART10RST      LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     ADCRST         LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SDIORST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SPI1RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SPI4RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SYSCFGRST      LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     TIM9RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     TIM10RST       LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     TIM11RST       LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SPI5RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SPI6RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SAI1RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     SAI2RST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     LTDCRST        LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     DSIRST         LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     DFSDM1RST      LL_APB2_GRP1_ReleaseReset\n
  *         APB2RSTR     DFSDM2RST      LL_APB2_GRP1_ReleaseReset
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_ALL
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB2RSTR, Periphs);
}

/**
  * @brief  Enable APB2 peripheral clocks in low-power mode
  * @rmtoll APB2LPENR     TIM1LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     TIM8LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     USART1LPEN      LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     USART6LPEN      LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     UART9LPEN       LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     UART10LPEN      LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     ADC1LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     ADC2LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     ADC3LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SDIOLPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SPI1LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SPI4LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SYSCFGLPEN      LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     EXTITLPEN       LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     TIM9LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     TIM10LPEN       LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     TIM11LPEN       LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SPI5LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SPI6LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SAI1LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     SAI2LPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     LTDCLPEN        LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     DSILPEN         LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     DFSDM1LPEN      LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     DSILPEN         LL_APB2_GRP1_EnableClockLowPower\n
  *         APB2LPENR     DFSDM2LPEN      LL_APB2_GRP1_EnableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC1
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs)
{
  __IO uint32_t tmpreg;
  SET_BIT(RCC->APB2LPENR, Periphs);
  /* Delay after an RCC peripheral clock enabling */
  tmpreg = READ_BIT(RCC->APB2LPENR, Periphs);
  (void)tmpreg;
}

/**
  * @brief  Disable APB2 peripheral clocks in low-power mode
  * @rmtoll APB2LPENR     TIM1LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     TIM8LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     USART1LPEN      LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     USART6LPEN      LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     UART9LPEN       LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     UART10LPEN      LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     ADC1LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     ADC2LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     ADC3LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SDIOLPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SPI1LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SPI4LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SYSCFGLPEN      LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     EXTITLPEN       LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     TIM9LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     TIM10LPEN       LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     TIM11LPEN       LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SPI5LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SPI6LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SAI1LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     SAI2LPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     LTDCLPEN        LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     DSILPEN         LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     DFSDM1LPEN      LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     DSILPEN         LL_APB2_GRP1_DisableClockLowPower\n
  *         APB2LPENR     DFSDM2LPEN      LL_APB2_GRP1_DisableClockLowPower
  * @param  Periphs This parameter can be a combination of the following values:
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM1
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART1
  *         @arg @ref LL_APB2_GRP1_PERIPH_USART6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_UART10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC1
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI1
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
  *         @arg @ref LL_APB2_GRP1_PERIPH_EXTI (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM9
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_TIM11
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI5 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SPI6 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DSI  (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
  *         @arg @ref LL_APB2_GRP1_PERIPH_DFSDM2 (*)
  *
  *         (*) value not defined in all devices.
  * @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs)
{
  CLEAR_BIT(RCC->APB2LPENR, Periphs);
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined(RCC) */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32F4xx_LL_BUS_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/