Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 703:2f457024049b
Added selection of digital o2 sensor source to HW menu:
Beside analog sensing a pure digital and a mixed mode (analag + digital) may now be selected by the HW sensor menu.
Bugfix: cursor was jumping to the first menu item in case the sensor source was changed. This was fixed and the cursor now stays at the sensor input selection.
author | Ideenmodellierer |
---|---|
date | Fri, 28 Oct 2022 20:32:24 +0200 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit