Mercurial > public > ostc4

view Small_CPU/Src/uart.c @ 306:2f43419102c8 cleanup-4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
bugfix, cleanup: do not clip depth to 0 A real dive with the previous commits shows that testing from the simulator cannot be fully trusted in relation to logic that is close to the depth sensor (that is obviously bypassed using the simulator). So 1) there is 3 second interval between the stopwatch and the divetime, and 2) the depth flips from 1m depth to surface 0m depth, and that is visible in the profile data. Point 2) is definitely caused by the removed code in this commit. It likely is not right to clip the depth value at all. It is fine to base decisions like is done in is_ambient_pressure_close_to_surface on it, but clipping the depth value itself is seems wrong. This has become more prominent with commit eba8d1eb5bef where the clipping depth changed from 40cm of depth to 1m of depth. When comparing profiles from an OSTC Plus, it shows that no depth clipping is present there, so that is one more argument to remove it here. Point 1) The 3 sec interval is likely not a coincidence. It is the time to travel for 1m depth with a default descend speed of 20m/min. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Wed, 22 May 2019 14:39:04 +0200
parents 5f11787b4f42
children 1b995079c045
line wrap: on
line source

/**
  ******************************************************************************
  * @file    uart.c 
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    27-March-2014
  * @brief   button control
  *           
  @verbatim                 
  ============================================================================== 
                        ##### How to use #####
  ============================================================================== 
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 
/* Includes ------------------------------------------------------------------*/
#include "uart.h"

/* Private variables ---------------------------------------------------------*/

UART_HandleTypeDef huart2;


/* Exported functions --------------------------------------------------------*/

void MX_USART2_UART_Init(void)
{
/* pullup special */
  GPIO_InitTypeDef   GPIO_InitStructure;
  __GPIOA_CLK_ENABLE();
  GPIO_InitStructure.Pin = GPIO_PIN_2;
  GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStructure.Pull = GPIO_PULLUP;
  GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); 

/* regular init */	
  huart2.Instance = USART2;
  huart2.Init.BaudRate = 1200;
  huart2.Init.WordLength = UART_WORDLENGTH_8B;
  huart2.Init.StopBits = UART_STOPBITS_1;
  huart2.Init.Parity = UART_PARITY_NONE;
  huart2.Init.Mode = UART_MODE_TX_RX;
  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
  HAL_UART_Init(&huart2);
}


uint8_t UART_ButtonAdjust(uint8_t *array)
{
	uint8_t answer[4];
	
	HAL_UART_Transmit(&huart2,array,4,1000);
	HAL_UART_Receive(&huart2,answer,4,2000);
	if(	(answer[0] == array[0])
		&&(answer[1] == array[1])
		&&(answer[2] == array[2])
		&&(answer[3] == array[3]))
	return 1;
	else
	return 0;
}

void MX_USART2_UART_DeInit(void)
{
	HAL_UART_DeInit(&huart2);
}


/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/