Mercurial > public > ostc4

view Documentations/OSTC4_CPU2_F411.ioc @ 306:2f43419102c8 cleanup-4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
bugfix, cleanup: do not clip depth to 0 A real dive with the previous commits shows that testing from the simulator cannot be fully trusted in relation to logic that is close to the depth sensor (that is obviously bypassed using the simulator). So 1) there is 3 second interval between the stopwatch and the divetime, and 2) the depth flips from 1m depth to surface 0m depth, and that is visible in the profile data. Point 2) is definitely caused by the removed code in this commit. It likely is not right to clip the depth value at all. It is fine to base decisions like is done in is_ambient_pressure_close_to_surface on it, but clipping the depth value itself is seems wrong. This has become more prominent with commit eba8d1eb5bef where the clipping depth changed from 40cm of depth to 1m of depth. When comparing profiles from an OSTC Plus, it shows that no depth clipping is present there, so that is one more argument to remove it here. Point 1) The 3 sec interval is likely not a coincidence. It is the time to travel for 1m depth with a default descend speed of 20m/min. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Wed, 22 May 2019 14:39:04 +0200
parents 7d1b61176708
children
line wrap: on
line source

#MicroXplorer Configuration settings - do not modify
#Fri May 22 12:37:15 CEST 2015
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8
ADC1.IPParameters=Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,Rank-0\#ChannelRegularConversion,master
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
ADC1.master=1
Dma.Request0=SPI1_RX
Dma.Request1=SPI1_TX
Dma.RequestsNb=2
Dma.SPI1_RX.0.Channel=DMA_CHANNEL_3
Dma.SPI1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
Dma.SPI1_RX.0.FIFOMode=DMA_FIFOMODE_DISABLE
Dma.SPI1_RX.0.Instance=DMA2_Stream0
Dma.SPI1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.SPI1_RX.0.MemInc=DMA_MINC_DISABLE
Dma.SPI1_RX.0.Mode=DMA_NORMAL
Dma.SPI1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.SPI1_RX.0.PeriphInc=DMA_PINC_DISABLE
Dma.SPI1_RX.0.Priority=DMA_PRIORITY_HIGH
Dma.SPI1_RX.0.RequestParameters=Instance,Channel,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode
Dma.SPI1_TX.1.Channel=DMA_CHANNEL_2
Dma.SPI1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
Dma.SPI1_TX.1.FIFOMode=DMA_FIFOMODE_DISABLE
Dma.SPI1_TX.1.Instance=DMA2_Stream2
Dma.SPI1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
Dma.SPI1_TX.1.MemInc=DMA_MINC_DISABLE
Dma.SPI1_TX.1.Mode=DMA_NORMAL
Dma.SPI1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
Dma.SPI1_TX.1.PeriphInc=DMA_PINC_DISABLE
Dma.SPI1_TX.1.Priority=DMA_PRIORITY_HIGH
Dma.SPI1_TX.1.RequestParameters=Instance,Channel,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode
File.Version=5
KeepUserPlacement=false
Mcu.Family=STM32F4
Mcu.IP0=ADC1
Mcu.IP1=CRC
Mcu.IP2=DMA
Mcu.IP3=I2C1
Mcu.IP4=NVIC
Mcu.IP5=RCC
Mcu.IP6=RTC
Mcu.IP7=SPI1
Mcu.IP8=SPI3
Mcu.IP9=SYS
Mcu.IPNb=10
Mcu.Name=STM32F411R(C-E)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC14-OSC32_IN
Mcu.Pin1=PC15-OSC32_OUT
Mcu.Pin10=PA6
Mcu.Pin11=PA7
Mcu.Pin12=PB0
Mcu.Pin13=PB12
Mcu.Pin14=PB13
Mcu.Pin15=PB14
Mcu.Pin16=PB15
Mcu.Pin17=PA9
Mcu.Pin18=PA10
Mcu.Pin19=PA13
Mcu.Pin2=PC0
Mcu.Pin20=PA14
Mcu.Pin21=PA15
Mcu.Pin22=PC10
Mcu.Pin23=PC11
Mcu.Pin24=PC12
Mcu.Pin25=PB3
Mcu.Pin26=PB8
Mcu.Pin27=PB9
Mcu.Pin28=VP_CRC_VS_CRC
Mcu.Pin29=VP_RTC_VS_RTC_Alarm_A_Intern
Mcu.Pin3=PC1
Mcu.Pin4=PC2
Mcu.Pin5=PC3
Mcu.Pin6=PA0-WKUP
Mcu.Pin7=PA1
Mcu.Pin8=PA4
Mcu.Pin9=PA5
Mcu.PinsNb=30
Mcu.UserName=STM32F411RETx
MxCube.Version=4.7.1
MxDb.Version=DB.4.0.71
NVIC.DMA2_Stream0_IRQn=true\:0\:0\:false
NVIC.DMA2_Stream2_IRQn=true\:0\:0\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_0
NVIC.SysTick_IRQn=true\:0\:0\:true
PA0-WKUP.Locked=true
PA0-WKUP.Signal=GPIO_Input
PA1.Locked=true
PA1.Signal=GPIO_Analog
PA10.Signal=USART1_RX
PA13.Mode=Trace-Asynchronous_SW
PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Trace-Asynchronous_SW
PA14.Signal=SYS_JTCK-SWCLK
PA15.Mode=NSS_Signal_Hard
PA15.Signal=SPI3_NSS
PA4.Locked=true
PA4.Mode=NSS_Signal_Hard
PA4.Signal=SPI1_NSS
PA5.Mode=Full_Duplex_Slave
PA5.Signal=SPI1_SCK
PA6.Mode=Full_Duplex_Slave
PA6.Signal=SPI1_MISO
PA7.Mode=Full_Duplex_Slave
PA7.Signal=SPI1_MOSI
PA9.Signal=USART1_TX
PB0.Locked=true
PB0.Signal=ADCx_IN8
PB12.Locked=true
PB12.Signal=GPIO_Analog
PB13.Locked=true
PB13.Signal=GPIO_Input
PB14.Locked=true
PB14.Signal=GPIO_Analog
PB15.Locked=true
PB15.Signal=GPIO_Output
PB3.Mode=Trace-Asynchronous_SW
PB3.Signal=SYS_JTDO-SWO
PB8.Locked=true
PB8.Mode=I2C
PB8.Signal=I2C1_SCL
PB9.Locked=true
PB9.Mode=I2C
PB9.Signal=I2C1_SDA
PC0.Locked=true
PC0.Signal=GPIO_Output
PC1.Locked=true
PC1.Signal=GPIO_Output
PC10.Mode=Full_Duplex_Master
PC10.Signal=SPI3_SCK
PC11.Mode=Full_Duplex_Master
PC11.Signal=SPI3_MISO
PC12.Mode=Full_Duplex_Master
PC12.Signal=SPI3_MOSI
PC14-OSC32_IN.Mode=LSE-External-Oscillator
PC14-OSC32_IN.Signal=RCC_OSC32_IN
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
PC2.Locked=true
PC2.Signal=GPIO_Input
PC3.Locked=true
PC3.Signal=GPIO_Output
PCC.Battery=Li-SOCL2(A3400)
PCC.Battery.Capacity=3400.0
PCC.Battery.Compatibility=Yes
PCC.Battery.InParallel=1
PCC.Battery.InSeries=1
PCC.Battery.MaxContinuous=100.0
PCC.Battery.MaxPulseCurrent=200.0
PCC.Battery.NominalVoltage=3.6
PCC.Battery.SelfDischarge=0.08
PCC.Checker=false
PCC.Family=STM32F4
PCC.MCU=STM32F411R(C-E)Tx
PCC.MXVersion=4.7.1
PCC.PartNumber=STM32F411RETx
PCC.Seq0=3
PCC.Seq0.Step0.Average_Current=19 \u00B5A
PCC.Seq0.Step0.CPU_Frequency=0 Hz
PCC.Seq0.Step0.DMIPS=0.0
PCC.Seq0.Step0.Duration=2 s
PCC.Seq0.Step0.Frequency=0 Hz
PCC.Seq0.Step0.Memory=n/a
PCC.Seq0.Step0.Mode=STOP
PCC.Seq0.Step0.Oscillator=Regulator_LP Flash-PwrDwn
PCC.Seq0.Step0.Peripherals=PVD* RTC*
PCC.Seq0.Step0.User's_Consumption=5 \u00B5A
PCC.Seq0.Step0.Vcore=No Scale
PCC.Seq0.Step0.Vdd=3.6
PCC.Seq0.Step0.Voltage_Source=Battery
PCC.Seq0.Step1.Average_Current=20.83 mA
PCC.Seq0.Step1.CPU_Frequency=100.0 MHz
PCC.Seq0.Step1.DMIPS=125.0
PCC.Seq0.Step1.Duration=2 ms
PCC.Seq0.Step1.Frequency=4.0 MHz
PCC.Seq0.Step1.Memory=FLASH
PCC.Seq0.Step1.Mode=RUN
PCC.Seq0.Step1.Oscillator=HSE PLL
PCC.Seq0.Step1.Peripherals=GPIOB I2C1
PCC.Seq0.Step1.User's_Consumption=120 \u00B5A
PCC.Seq0.Step1.Vcore=Scale1-Medium
PCC.Seq0.Step1.Vdd=3.6
PCC.Seq0.Step1.Voltage_Source=Battery
PCC.Seq0.Step2.Average_Current=3.31 mA
PCC.Seq0.Step2.CPU_Frequency=100.0 MHz
PCC.Seq0.Step2.DMIPS=125.0
PCC.Seq0.Step2.Duration=22 ms
PCC.Seq0.Step2.Frequency=4.0 MHz
PCC.Seq0.Step2.Memory=RAM/FLASH
PCC.Seq0.Step2.Mode=SLEEP
PCC.Seq0.Step2.Oscillator=HSE PLL
PCC.Seq0.Step2.Peripherals=GPIOB I2C1
PCC.Seq0.Step2.User's_Consumption=0 mA
PCC.Seq0.Step2.Vcore=Scale1-Medium
PCC.Seq0.Step2.Vdd=3.6
PCC.Seq0.Step2.Voltage_Source=Battery
PCC.SubFamily=STM32F411
PCC.Temperature=25
PCC.Vdd=3.6
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=2
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F411RETx
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.5.0
ProjectManager.FreePins=true
ProjectManager.HalAssertFull=false
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=OSTC4 CPU2 F411.ioc
ProjectManager.ProjectName=OSTC4 CPU2 F411
ProjectManager.TargetToolchain=MDK-ARM 4.73
ProjectManager.ToolChainLocation=
RCC.48MHZClocksFreq_Value=100000000
RCC.AHBFreq_Value=100000000
RCC.APB1CLKDivider=RCC_HCLK_DIV2
RCC.APB1Freq_Value=50000000
RCC.APB1TimFreq_Value=100000000
RCC.APB2Freq_Value=100000000
RCC.APB2TimFreq_Value=100000000
RCC.CortexFreq_Value=12500000
RCC.EthernetFreq_Value=100000000
RCC.FCLKCortexFreq_Value=100000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=100000000
RCC.HSE_VALUE=25000000
RCC.HSI_VALUE=16000000
RCC.I2SClocksFreq_Value=96000000
RCC.IPParameters=LSI_VALUE,APB1TimFreq_Value,APB2Freq_Value,MCO2PinFreq_Value,APB1CLKDivider,FCLKCortexFreq_Value,RCC_RTC_Clock_SourceVirtual,AHBFreq_Value,48MHZClocksFreq_Value,VCOInputFreq_Value,I2SClocksFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,PLLP,HSE_VALUE,HSI_VALUE,VCOI2SOutputFreq_Value,PLLCLKFreq_Value,VCOInputMFreq_Value,RTCFreq_Value,FamilyName,HCLKFreq_Value,EthernetFreq_Value,PLLN,VCOOutputFreq_Value,VcooutputI2S,CortexFreq_Value,APB1Freq_Value,RTCHSEDivFreq_Value,APB2TimFreq_Value
RCC.LSI_VALUE=32000
RCC.MCO2PinFreq_Value=100000000
RCC.PLLCLKFreq_Value=100000000
RCC.PLLN=400
RCC.PLLP=RCC_PLLP_DIV4
RCC.RCC_RTC_Clock_SourceVirtual=RCC_RTCCLKSOURCE_LSE
RCC.RTCFreq_Value=32768
RCC.RTCHSEDivFreq_Value=12500000
RCC.SYSCLKFreq_VALUE=100000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.VCOI2SOutputFreq_Value=192000000
RCC.VCOInputFreq_Value=1000000
RCC.VCOInputMFreq_Value=1000000
RCC.VCOOutputFreq_Value=400000000
RCC.VcooutputI2S=96000000
SH.ADCx_IN8.0=ADC1_IN8,IN8
SH.ADCx_IN8.ConfNb=1
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_2
SPI1.CalculateBaudRate=50.0 MBits/s
SPI1.IPParameters=BaudRatePrescaler,NSS-Full_Duplex_Slave,VirtualNSS,VirtualType,CalculateBaudRate
SPI1.NSS-Full_Duplex_Slave=SPI_NSS_SOFT
SPI1.VirtualNSS=VM_NSSHARD
SPI1.VirtualType=VM_SLAVE
SPI3.CalculateBaudRate=25.0 MBits/s
SPI3.IPParameters=VirtualNSS,Mode,CalculateBaudRate
SPI3.Mode=SPI_MODE_MASTER
SPI3.VirtualNSS=VM_NSSHARD
VP_CRC_VS_CRC.Mode=CRC_Activate
VP_CRC_VS_CRC.Signal=CRC_VS_CRC
VP_RTC_VS_RTC_Alarm_A_Intern.Mode=Alarm A
VP_RTC_VS_RTC_Alarm_A_Intern.Signal=RTC_VS_RTC_Alarm_A_Intern