Mercurial > public > ostc4
view wiki/Using OpenSTM32.md @ 519:2c49561c8062
Reset Safety Stop display in case of a new descend:
In previous version safety stop was displayed in while the stop depth was reached. The count down was interrupted in case of a new descend but the safety stop was still displayed, blocking the NDL visualization in the big font view. To avoid this scenario a restart function has been added which will return to NDL view in case of a descend > 2m. If just a short drop happend then the countdown will be continued when the safety stop depth is reached again. If that takes more then a minute the safety stop counter is restarted.
author | Ideenmodellierer |
---|---|
date | Sun, 06 Sep 2020 22:11:51 +0200 |
parents | 0e7c16dd774d |
children |
line wrap: on
line source
# Using OpenSTM32 IDE to Compile OSTC4 Firmware # The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer. You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 1. Register on http://www.openstm32.org/ : that will allows you to download the IDE. 2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux). 3. Use the ready made project ... in ... Or you can create a brand new project by following the _How To_'s: - [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md) - [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md) - [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md) - [HowTo generate uploadable firmware file](Make Firmware File.md)