Mercurial > public > ostc4
view Small_CPU/Inc/i2c.h @ 519:2c49561c8062
Reset Safety Stop display in case of a new descend:
In previous version safety stop was displayed in while the stop depth was reached. The count down was interrupted in case of a new descend but the safety stop was still displayed, blocking the NDL visualization in the big font view. To avoid this scenario a restart function has been added which will return to NDL view in case of a descend > 2m. If just a short drop happend then the countdown will be continued when the safety stop depth is reached again. If that takes more then a minute the safety stop counter is restarted.
author | Ideenmodellierer |
---|---|
date | Sun, 06 Sep 2020 22:11:51 +0200 |
parents | c3d511365552 |
children | e595d2d1f77f |
line wrap: on
line source
/* Define to prevent recursive inclusion -------------------------------------*/ #ifndef I2C_H #define I2C_H /* Pressure Sensor */ #define DEVICE_PRESSURE_MS5803 0xEE // gen 1 and gen 2 use 0xEE (MS5803) #define DEVICE_PRESSURE_MS5837 0xEC // end-2019 hardware (gen 3) uses 0xEC (MS5837) /* Compass/Accelerometer */ #define COMPASS_NOT_RECOGNIZED 0xAA ///< id used with hardwareCompass #define compass_generation1 0x01 // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) #define compass_generation2 0x02 // Hardware gen 2 (Single chip solution LSM303D) #define compass_generation3 0x03 // Hardware gen 3 (Single chip solution LSM303AGR) #define DEVICE_ACCELARATOR_MMA8452Q 0x38 // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) #define DEVICE_COMPASS_HMC5883L 0x3C // Hardware gen 1 (Two chip solution with MMA8452Q and HMC5883L) #define DEVICE_COMPASS_303D 0x3C // Hardware gen 2 (Single chip solution LSM303D) #define DEVICE_COMPASS_303AGR 0x3C // Hardware gen 3 (Single chip solution LSM303AGR) #define DEVICE_ACCELARATOR_303AGR 0x32 // Hardware gen 3 (Single chip solution LSM303AGR) // Compass 3 defines (Can move in separate .h file...) #define WHOIAM_VALUE_LSM303AGR 0x33 /* Battery Gas Gauge */ #define DEVICE_BATTERYGAUGE 0xC8 // LTC2941 battery gauge /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" HAL_StatusTypeDef I2C_Master_Transmit( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef I2C_Master_TransmitNoStop( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef I2C_Master_Receive( uint16_t DevAddress, uint8_t *pData, uint16_t Size); HAL_StatusTypeDef MX_I2C1_Init(void); void I2C_DeInit(void); HAL_StatusTypeDef I2C1_Status(void); GPIO_PinState MX_I2C1_TestAndClear(void); //void I2C_Error(void); #endif /* I2C_H */