Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Src/stm32f4xx_hal_wwdg.c @ 95:2a74647d28d1 kittz
Debounce. Bounced buttons fixed.
author | Dmitry Romanov <kitt@bk.ru> |
---|---|
date | Mon, 26 Nov 2018 13:42:38 +0300 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_wwdg.c * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief WWDG HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Window Watchdog (WWDG) peripheral: * + Initialization and de-initialization functions * + IO operation functions * + Peripheral State functions @verbatim ============================================================================== ##### WWDG specific features ##### ============================================================================== [..] Once enabled the WWDG generates a system reset on expiry of a programmed time period, unless the program refreshes the counter (downcounter) before reaching 0x3F value (i.e. a reset is generated when the counter value rolls over from 0x40 to 0x3F). (+) An MCU reset is also generated if the counter value is refreshed before the counter has reached the refresh window value. This implies that the counter must be refreshed in a limited window. (+) Once enabled the WWDG cannot be disabled except by a system reset. (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG reset occurs. (+) The WWDG counter input clock is derived from the APB clock divided by a programmable prescaler. (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler) (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock (+) WWDG Counter refresh is allowed between the following limits : (++) min time (mS) = 1000 * (Counter – Window) / WWDG clock (++) max time (mS) = 1000 * (Counter – 0x40) / WWDG clock (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms ##### How to use this driver ##### ============================================================================== [..] (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). (+) Set the WWDG prescaler, refresh window and counter value using HAL_WWDG_Init() function. (+) Start the WWDG using HAL_WWDG_Start() function. When the WWDG is enabled the counter value should be configured to a value greater than 0x40 to prevent generating an immediate reset. (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is generated when the counter reaches 0x40, and then start the WWDG using HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can add his own code by customization of function pointer HAL_WWDG_WakeupCallback Once enabled, EWI interrupt cannot be disabled except by a system reset. (+) Then the application program must refresh the WWDG counter at regular intervals during normal operation to prevent an MCU reset, using HAL_WWDG_Refresh() function. This operation must occur only when the counter is lower than the refresh window value already programmed. *** WWDG HAL driver macros list *** ================================== [..] Below the list of most used macros in WWDG HAL driver. (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags (+) __HAL_WWDG_ENABLE_IT: Enables the WWDG early wake-up interrupt @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup WWDG WWDG * @brief WWDG HAL module driver. * @{ */ #ifdef HAL_WWDG_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @defgroup WWDG_Exported_Functions WWDG Exported Functions * @{ */ /** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions. * @verbatim ============================================================================== ##### Initialization and de-initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize the WWDG according to the specified parameters in the WWDG_InitTypeDef and create the associated handle (+) DeInitialize the WWDG peripheral (+) Initialize the WWDG MSP (+) DeInitialize the WWDG MSP @endverbatim * @{ */ /** * @brief Initializes the WWDG according to the specified * parameters in the WWDG_InitTypeDef and creates the associated handle. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL status */ HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) { /* Check the WWDG handle allocation */ if(hwwdg == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler)); assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); if(hwwdg->State == HAL_WWDG_STATE_RESET) { /* Init the low level hardware */ HAL_WWDG_MspInit(hwwdg); } /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_BUSY; /* Set WWDG Prescaler and Window */ MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window)); /* Set WWDG Counter */ MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_READY; /* Return function status */ return HAL_OK; } /** * @brief DeInitializes the WWDG peripheral. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL status */ HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg) { /* Check the WWDG handle allocation */ if(hwwdg == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance)); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_BUSY; /* DeInit the low level hardware */ HAL_WWDG_MspDeInit(hwwdg); /* Reset WWDG Control register */ hwwdg->Instance->CR = (uint32_t)0x0000007F; /* Reset WWDG Configuration register */ hwwdg->Instance->CFR = (uint32_t)0x0000007F; /* Reset WWDG Status register */ hwwdg->Instance->SR = 0; /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_RESET; /* Release Lock */ __HAL_UNLOCK(hwwdg); /* Return function status */ return HAL_OK; } /** * @brief Initializes the WWDG MSP. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval None */ __weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) { /* NOTE: This function Should not be modified, when the callback is needed, the HAL_WWDG_MspInit could be implemented in the user file */ } /** * @brief DeInitializes the WWDG MSP. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval None */ __weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg) { /* NOTE: This function Should not be modified, when the callback is needed, the HAL_WWDG_MspDeInit could be implemented in the user file */ } /** * @} */ /** @defgroup WWDG_Exported_Functions_Group2 IO operation functions * @brief IO operation functions * @verbatim ============================================================================== ##### IO operation functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Start the WWDG. (+) Refresh the WWDG. (+) Handle WWDG interrupt request. @endverbatim * @{ */ /** * @brief Starts the WWDG. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL status */ HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg) { /* Process Locked */ __HAL_LOCK(hwwdg); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_BUSY; /* Enable the peripheral */ __HAL_WWDG_ENABLE(hwwdg); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hwwdg); /* Return function status */ return HAL_OK; } /** * @brief Starts the WWDG with interrupt enabled. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL status */ HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg) { /* Process Locked */ __HAL_LOCK(hwwdg); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_BUSY; /* Enable the Early Wakeup Interrupt */ __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI); /* Enable the peripheral */ __HAL_WWDG_ENABLE(hwwdg); /* Return function status */ return HAL_OK; } /** * @brief Refreshes the WWDG. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @param Counter: value of counter to put in WWDG counter * @retval HAL status */ HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter) { /* Process Locked */ __HAL_LOCK(hwwdg); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_BUSY; /* Check the parameters */ assert_param(IS_WWDG_COUNTER(Counter)); /* Write to WWDG CR the WWDG Counter value to refresh with */ MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hwwdg); /* Return function status */ return HAL_OK; } /** * @brief Handles WWDG interrupt request. * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations * or data logging must be performed before the actual reset is generated. * The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro. * When the downcounter reaches the value 0x40, and EWI interrupt is * generated and the corresponding Interrupt Service Routine (ISR) can * be used to trigger specific actions (such as communications or data * logging), before resetting the device. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval None */ void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) { /* Check if Early Wakeup Interrupt is enable */ if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET) { /* Check if WWDG Early Wakeup Interrupt occurred */ if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET) { /* Early Wakeup callback */ HAL_WWDG_WakeupCallback(hwwdg); /* Change WWDG peripheral state */ hwwdg->State = HAL_WWDG_STATE_READY; /* Clear the WWDG Early Wakeup flag */ __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF); /* Process Unlocked */ __HAL_UNLOCK(hwwdg); } } } /** * @brief Early Wakeup WWDG callback. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval None */ __weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg) { /* NOTE: This function Should not be modified, when the callback is needed, the HAL_WWDG_WakeupCallback could be implemented in the user file */ } /** * @} */ /** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions * @brief Peripheral State functions. * @verbatim ============================================================================== ##### Peripheral State functions ##### ============================================================================== [..] This subsection permits to get in run-time the status of the peripheral and the data flow. @endverbatim * @{ */ /** * @brief Returns the WWDG state. * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL state */ HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg) { return hwwdg->State; } /** * @} */ /** * @} */ #endif /* HAL_WWDG_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/