Mercurial > public > ostc4
view Small_CPU/Src/batteryCharger.c @ 196:2885628ab3ba div-fixes-cleaup-2
Bugfix, minor: color the overview customview correctly
When using a custom color (from the SYS2 menu, layout), the overview
customview was the only one presented in the wrong color. While the fix
for this is rather simple (in hindsight), it was a non trivial search
trough rather obfuscated code.
There is a specific function to set the text color index on this page, but
this only worked for a single line text string, that has the color index
byte as the very first character. The original author already recognized
that this function "could be extended", but left this extension as an
exercise to the reader.
So, the coloring is fixed by extending the function, and actually using
it for the overview customview.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Wed, 20 Mar 2019 16:24:10 +0100 |
parents | 5f11787b4f42 |
children | 5149cd644fbc |
line wrap: on
line source
/** ****************************************************************************** * @file batteryCharger.c * @author heinrichs weikamp gmbh * @date 09-Dec-2014 * @version V0.0.1 * @since 09-Dec-2014 * @brief LTC4054 Battery Charger * @verbatim ============================================================================== ##### How to use ##### ============================================================================== The bq5105x provides one status output, CHG. This output is an open-drain NMOS device that is rated to 20 V. The open-drain FET connected to the CHG pin will be turned on whenever the output (BAT) of the charger is enabled. As a note, the output of the charger supply will not be enabled if the VRECT-REG does not converge to the no-load target voltage. CHG F4 7 O Open-drain output – active when BAT is enabled. Float if not used. @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "batteryCharger.h" #include "batteryGasGauge.h" #include "stm32f4xx_hal.h" #include "scheduler.h" #define CHARGE_IN_PIN GPIO_PIN_2 #define CHARGE_IN_GPIO_PORT GPIOC #define CHARGE_IN_GPIO_ENABLE() __GPIOC_CLK_ENABLE() #define CHARGE_OUT_PIN GPIO_PIN_1 #define CHARGE_OUT_GPIO_PORT GPIOC #define CHARGE_OUT_GPIO_ENABLE() __GPIOC_CLK_ENABLE() uint8_t battery_i_charge_status = 0; uint8_t battery_charger_counter = 0; /* can be 0, 1 or 255 * 0 is disconnected * 1 is charging * 255 is full */ uint8_t get_charge_status(void) { return battery_i_charge_status; } void init_battery_charger_status(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif CHARGE_IN_GPIO_ENABLE(); CHARGE_OUT_GPIO_ENABLE(); ReInit_battery_charger_status_pins(); } void ReInit_battery_charger_status_pins(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.Pin = CHARGE_IN_PIN; GPIO_InitStructure.Mode = GPIO_MODE_INPUT; GPIO_InitStructure.Pull = GPIO_NOPULL; GPIO_InitStructure.Speed = GPIO_SPEED_LOW; HAL_GPIO_Init(CHARGE_IN_GPIO_PORT, &GPIO_InitStructure); GPIO_InitStructure.Pin = CHARGE_OUT_PIN; GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; GPIO_InitStructure.Pull = GPIO_NOPULL; GPIO_InitStructure.Speed = GPIO_SPEED_LOW; HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); } void DeInit_battery_charger_status_pins(void) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; GPIO_InitStructure.Speed = GPIO_SPEED_LOW; GPIO_InitStructure.Pull = GPIO_NOPULL; GPIO_InitStructure.Pin = CHARGE_IN_PIN; HAL_GPIO_Init(CHARGE_IN_GPIO_PORT, &GPIO_InitStructure); GPIO_InitStructure.Pin = CHARGE_OUT_PIN; HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); } /* static counter is used to avoid multiple counts of charge startings and after that it is used, starting at 127 to count for the charge full signal there a short disconnections with the QI charger therefore the battery_charger_counter has a countdown instead of = 0. battery_gas_gauge_set_charge_full and scheduleUpdateDeviceDataChargerFull are set after disconnection as the charging process continues as long as not disconnected to prevent the short disconnections the battery_charger_counter is used too including upcounting again while battery_i_charge_status == 255 and the connection is established */ void battery_charger_get_status_and_contral_battery_gas_gauge(uint8_t inSleepModeLessCounts) { #ifdef OSTC_ON_DISCOVERY_HARDWARE return; #endif /* on disconnection or while disconnected */ if(HAL_GPIO_ReadPin(CHARGE_IN_GPIO_PORT,CHARGE_IN_PIN)) { if(battery_charger_counter) { battery_charger_counter--; global.dataSendToMaster.chargeStatus = CHARGER_lostConnection; global.deviceDataSendToMaster.chargeStatus = CHARGER_lostConnection; } /* max count down to 127+5 or 127+20 */ if((battery_i_charge_status == 255) && battery_charger_counter < 127) { // battery_gas_gauge_set_charge_full(); // scheduleUpdateDeviceDataChargerFull(); battery_charger_counter = 0; } if(battery_charger_counter == 0) { battery_i_charge_status = 0; global.dataSendToMaster.chargeStatus = CHARGER_off; global.deviceDataSendToMaster.chargeStatus = CHARGER_off; } return; } /* connected */ /* wait for disconnection to write and reset */ if(battery_i_charge_status == 255) { global.dataSendToMaster.chargeStatus = CHARGER_complete; global.deviceDataSendToMaster.chargeStatus = CHARGER_complete; if((inSleepModeLessCounts && (battery_charger_counter < 127+5)) || (battery_charger_counter < 127+20)) battery_charger_counter++; return; } if(battery_charger_counter == 0) battery_i_charge_status = 1; /* charger is connected and didn't signal full yet */ global.dataSendToMaster.chargeStatus = CHARGER_running; global.deviceDataSendToMaster.chargeStatus = CHARGER_running; GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.Pin = CHARGE_OUT_PIN; GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStructure.Pull = GPIO_NOPULL; GPIO_InitStructure.Speed = GPIO_SPEED_LOW; HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); HAL_GPIO_WritePin(CHARGE_OUT_GPIO_PORT, CHARGE_OUT_PIN,GPIO_PIN_SET); HAL_Delay(1); if(battery_charger_counter < 120) { if(!inSleepModeLessCounts) battery_charger_counter++; else { battery_charger_counter += 30; if(battery_charger_counter >= 127) battery_charger_counter = 126; } } else if(battery_charger_counter < 127) { battery_charger_counter = 127; if(battery_i_charge_status < 2) { battery_i_charge_status = 2; scheduleUpdateDeviceDataChargerCharging(); } } if(battery_charger_counter >= 127) { if(HAL_GPIO_ReadPin(CHARGE_IN_GPIO_PORT,CHARGE_IN_PIN) || (get_voltage() >= 4.1f)) { battery_charger_counter++; if((inSleepModeLessCounts && (battery_charger_counter > 127+5)) || (battery_charger_counter > 127+20)) { battery_charger_counter = 127; if(get_voltage() >= 4.1f) { battery_i_charge_status = 255; battery_gas_gauge_set_charge_full(); scheduleUpdateDeviceDataChargerFull(); } } } else battery_charger_counter = 127; } GPIO_InitStructure.Pin = CHARGE_OUT_PIN; GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; GPIO_InitStructure.Pull = GPIO_NOPULL; GPIO_InitStructure.Speed = GPIO_SPEED_LOW; HAL_GPIO_Init(CHARGE_OUT_GPIO_PORT, &GPIO_InitStructure); } /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/