Bugfix, minor: color the overview customview correctly When using a custom color (from the SYS2 menu, layout), the overview customview was the only one presented in the wrong color. While the fix for this is rather simple (in hindsight), it was a non trivial search trough rather obfuscated code. There is a specific function to set the text color index on this page, but this only worked for a single line text string, that has the color index byte as the very first character. The original author already recognized that this function "could be extended", but left this extension as an exercise to the reader. So, the coloring is fixed by extending the function, and actually using it for the overview customview. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit