DevBugfix Co2 sensor details:
The CO2 sensor could not be selected to enter the details menu. This has been corrected and the enable / disable state is shown in the sensor overview.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_ll_dma2d.h+ − * @author MCD Application Team+ − * @brief Header file of DMA2D LL module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */+ − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_LL_DMA2D_H+ − #define __STM32F4xx_LL_DMA2D_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx.h"+ − + − /** @addtogroup STM32F4xx_LL_Driver+ − * @{+ − */+ − + − #if defined (DMA2D)+ − + − /** @defgroup DMA2D_LL DMA2D+ − * @{+ − */+ − + − /* Private types -------------------------------------------------------------*/+ − /* Private variables ---------------------------------------------------------*/+ − /* Private constants ---------------------------------------------------------*/+ − /* Private macros ------------------------------------------------------------*/+ − #if defined(USE_FULL_LL_DRIVER)+ − /** @defgroup DMA2D_LL_Private_Macros DMA2D Private Macros+ − * @{+ − */+ − + − /**+ − * @}+ − */+ − #endif /*USE_FULL_LL_DRIVER*/+ − + − /* Exported types ------------------------------------------------------------*/+ − #if defined(USE_FULL_LL_DRIVER)+ − /** @defgroup DMA2D_LL_ES_Init_Struct DMA2D Exported Init structures+ − * @{+ − */+ − + − /**+ − * @brief LL DMA2D Init Structure Definition+ − */+ − typedef struct+ − {+ − uint32_t Mode; /*!< Specifies the DMA2D transfer mode.+ − - This parameter can be one value of @ref DMA2D_LL_EC_MODE.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetMode().*/+ − + − uint32_t ColorMode; /*!< Specifies the color format of the output image.+ − - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */+ − + − uint32_t OutputBlue; /*!< Specifies the Blue value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputGreen; /*!< Specifies the Green value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputRed; /*!< Specifies the Red value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − - This parameter is not considered if RGB888 or RGB565 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputMemoryAddress; /*!< Specifies the memory address.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputMemAddr(). */+ − + − uint32_t LineOffset; /*!< Specifies the output line offset value.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetLineOffset(). */+ − + − uint32_t NbrOfLines; /*!< Specifies the number of lines of the area to be transferred.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfLines(). */+ − + − uint32_t NbrOfPixelsPerLines; /*!< Specifies the number of pixels per lines of the area to be transfered.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetNbrOfPixelsPerLines(). */+ − + − } LL_DMA2D_InitTypeDef;+ − + − /**+ − * @brief LL DMA2D Layer Configuration Structure Definition+ − */+ − typedef struct+ − {+ − uint32_t MemoryAddress; /*!< Specifies the foreground or background memory address.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetMemAddr() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetMemAddr() for background layer. */+ − + − uint32_t LineOffset; /*!< Specifies the foreground or background line offset value.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetLineOffset() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetLineOffset() for background layer. */+ − + − uint32_t ColorMode; /*!< Specifies the foreground or background color mode.+ − - This parameter can be one value of @ref DMA2D_LL_EC_INPUT_COLOR_MODE.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetColorMode() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetColorMode() for background layer. */+ − + − uint32_t CLUTColorMode; /*!< Specifies the foreground or background CLUT color mode.+ − - This parameter can be one value of @ref DMA2D_LL_EC_CLUT_COLOR_MODE.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetCLUTColorMode() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetCLUTColorMode() for background layer. */+ − + − uint32_t CLUTSize; /*!< Specifies the foreground or background CLUT size.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetCLUTSize() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetCLUTSize() for background layer. */+ − + − uint32_t AlphaMode; /*!< Specifies the foreground or background alpha mode.+ − - This parameter can be one value of @ref DMA2D_LL_EC_ALPHA_MODE.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetAlphaMode() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetAlphaMode() for background layer. */+ − + − uint32_t Alpha; /*!< Specifies the foreground or background Alpha value.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetAlpha() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetAlpha() for background layer. */+ − + − uint32_t Blue; /*!< Specifies the foreground or background Blue color value.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetBlueColor() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetBlueColor() for background layer. */+ − + − uint32_t Green; /*!< Specifies the foreground or background Green color value.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetGreenColor() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetGreenColor() for background layer. */+ − + − uint32_t Red; /*!< Specifies the foreground or background Red color value.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetRedColor() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetRedColor() for background layer. */+ − + − uint32_t CLUTMemoryAddress; /*!< Specifies the foreground or background CLUT memory address.+ − - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFFFFF.+ − + − This parameter can be modified afterwards using unitary functions+ − - @ref LL_DMA2D_FGND_SetCLUTMemAddr() for foreground layer,+ − - @ref LL_DMA2D_BGND_SetCLUTMemAddr() for background layer. */+ − + − } LL_DMA2D_LayerCfgTypeDef;+ − + − /**+ − * @brief LL DMA2D Output Color Structure Definition+ − */+ − typedef struct+ − {+ − uint32_t ColorMode; /*!< Specifies the color format of the output image.+ − - This parameter can be one value of @ref DMA2D_LL_EC_OUTPUT_COLOR_MODE.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColorMode(). */+ − + − uint32_t OutputBlue; /*!< Specifies the Blue value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputGreen; /*!< Specifies the Green value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x3F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputRed; /*!< Specifies the Red value of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if RGB888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if RGB565 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − uint32_t OutputAlpha; /*!< Specifies the Alpha channel of the output image.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF if ARGB8888 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x01 if ARGB1555 color mode is selected.+ − - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x0F if ARGB4444 color mode is selected.+ − - This parameter is not considered if RGB888 or RGB565 color mode is selected.+ − + − This parameter can be modified afterwards using unitary function @ref LL_DMA2D_SetOutputColor() or configuration+ − function @ref LL_DMA2D_ConfigOutputColor(). */+ − + − } LL_DMA2D_ColorTypeDef;+ − + − /**+ − * @}+ − */+ − #endif /* USE_FULL_LL_DRIVER */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup DMA2D_LL_Exported_Constants DMA2D Exported Constants+ − * @{+ − */+ − + − /** @defgroup DMA2D_LL_EC_GET_FLAG Get Flags Defines+ − * @brief Flags defines which can be used with LL_DMA2D_ReadReg function+ − * @{+ − */+ − #define LL_DMA2D_FLAG_CEIF DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */+ − #define LL_DMA2D_FLAG_CTCIF DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */+ − #define LL_DMA2D_FLAG_CAEIF DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */+ − #define LL_DMA2D_FLAG_TWIF DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */+ − #define LL_DMA2D_FLAG_TCIF DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */+ − #define LL_DMA2D_FLAG_TEIF DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_IT IT Defines+ − * @brief IT defines which can be used with LL_DMA2D_ReadReg and LL_DMA2D_WriteReg functions+ − * @{+ − */+ − #define LL_DMA2D_IT_CEIE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */+ − #define LL_DMA2D_IT_CTCIE DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */+ − #define LL_DMA2D_IT_CAEIE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */+ − #define LL_DMA2D_IT_TWIE DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */+ − #define LL_DMA2D_IT_TCIE DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */+ − #define LL_DMA2D_IT_TEIE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_MODE Mode+ − * @{+ − */+ − #define LL_DMA2D_MODE_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */+ − #define LL_DMA2D_MODE_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */+ − #define LL_DMA2D_MODE_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */+ − #define LL_DMA2D_MODE_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_OUTPUT_COLOR_MODE Output Color Mode+ − * @{+ − */+ − #define LL_DMA2D_OUTPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */+ − #define LL_DMA2D_OUTPUT_MODE_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 */+ − #define LL_DMA2D_OUTPUT_MODE_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 */+ − #define LL_DMA2D_OUTPUT_MODE_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 */+ − #define LL_DMA2D_OUTPUT_MODE_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_INPUT_COLOR_MODE Input Color Mode+ − * @{+ − */+ − #define LL_DMA2D_INPUT_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */+ − #define LL_DMA2D_INPUT_MODE_RGB888 DMA2D_FGPFCCR_CM_0 /*!< RGB888 */+ − #define LL_DMA2D_INPUT_MODE_RGB565 DMA2D_FGPFCCR_CM_1 /*!< RGB565 */+ − #define LL_DMA2D_INPUT_MODE_ARGB1555 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1) /*!< ARGB1555 */+ − #define LL_DMA2D_INPUT_MODE_ARGB4444 DMA2D_FGPFCCR_CM_2 /*!< ARGB4444 */+ − #define LL_DMA2D_INPUT_MODE_L8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_2) /*!< L8 */+ − #define LL_DMA2D_INPUT_MODE_AL44 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL44 */+ − #define LL_DMA2D_INPUT_MODE_AL88 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_2) /*!< AL88 */+ − #define LL_DMA2D_INPUT_MODE_L4 DMA2D_FGPFCCR_CM_3 /*!< L4 */+ − #define LL_DMA2D_INPUT_MODE_A8 (DMA2D_FGPFCCR_CM_0|DMA2D_FGPFCCR_CM_3) /*!< A8 */+ − #define LL_DMA2D_INPUT_MODE_A4 (DMA2D_FGPFCCR_CM_1|DMA2D_FGPFCCR_CM_3) /*!< A4 */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_ALPHA_MODE Alpha Mode+ − * @{+ − */+ − #define LL_DMA2D_ALPHA_MODE_NO_MODIF 0x00000000U /*!< No modification of the alpha channel value */+ − #define LL_DMA2D_ALPHA_MODE_REPLACE DMA2D_FGPFCCR_AM_0 /*!< Replace original alpha channel value by programmed alpha value */+ − #define LL_DMA2D_ALPHA_MODE_COMBINE DMA2D_FGPFCCR_AM_1 /*!< Replace original alpha channel value by programmed alpha value+ − with original alpha channel value */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EC_CLUT_COLOR_MODE CLUT Color Mode+ − * @{+ − */+ − #define LL_DMA2D_CLUT_COLOR_MODE_ARGB8888 0x00000000U /*!< ARGB8888 */+ − #define LL_DMA2D_CLUT_COLOR_MODE_RGB888 DMA2D_FGPFCCR_CCM /*!< RGB888 */+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Exported macro ------------------------------------------------------------*/+ − /** @defgroup DMA2D_LL_Exported_Macros DMA2D Exported Macros+ − * @{+ − */+ − + − /** @defgroup DMA2D_LL_EM_WRITE_READ Common Write and read registers Macros+ − * @{+ − */+ − + − /**+ − * @brief Write a value in DMA2D register.+ − * @param __INSTANCE__ DMA2D Instance+ − * @param __REG__ Register to be written+ − * @param __VALUE__ Value to be written in the register+ − * @retval None+ − */+ − #define LL_DMA2D_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))+ − + − /**+ − * @brief Read a value in DMA2D register.+ − * @param __INSTANCE__ DMA2D Instance+ − * @param __REG__ Register to be read+ − * @retval Register value+ − */+ − #define LL_DMA2D_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Exported functions --------------------------------------------------------*/+ − /** @defgroup DMA2D_LL_Exported_Functions DMA2D Exported Functions+ − * @{+ − */+ − + − /** @defgroup DMA2D_LL_EF_Configuration Configuration Functions+ − * @{+ − */+ − + − /**+ − * @brief Start a DMA2D transfer.+ − * @rmtoll CR START LL_DMA2D_Start+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_Start(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_START);+ − }+ − + − /**+ − * @brief Indicate if a DMA2D transfer is ongoing.+ − * @rmtoll CR START LL_DMA2D_IsTransferOngoing+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsTransferOngoing(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_START) == (DMA2D_CR_START));+ − }+ − + − /**+ − * @brief Suspend DMA2D transfer.+ − * @note This API can be used to suspend automatic foreground or background CLUT loading.+ − * @rmtoll CR SUSP LL_DMA2D_Suspend+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_Suspend(DMA2D_TypeDef *DMA2Dx)+ − {+ − MODIFY_REG(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START, DMA2D_CR_SUSP);+ − }+ − + − /**+ − * @brief Resume DMA2D transfer.+ − * @note This API can be used to resume automatic foreground or background CLUT loading.+ − * @rmtoll CR SUSP LL_DMA2D_Resume+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_Resume(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_SUSP | DMA2D_CR_START);+ − }+ − + − /**+ − * @brief Indicate if DMA2D transfer is suspended.+ − * @note This API can be used to indicate whether or not automatic foreground or+ − * background CLUT loading is suspended.+ − * @rmtoll CR SUSP LL_DMA2D_IsSuspended+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsSuspended(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_SUSP) == (DMA2D_CR_SUSP));+ − }+ − + − /**+ − * @brief Abort DMA2D transfer.+ − * @note This API can be used to abort automatic foreground or background CLUT loading.+ − * @rmtoll CR ABORT LL_DMA2D_Abort+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_Abort(DMA2D_TypeDef *DMA2Dx)+ − {+ − MODIFY_REG(DMA2Dx->CR, DMA2D_CR_ABORT | DMA2D_CR_START, DMA2D_CR_ABORT);+ − }+ − + − /**+ − * @brief Indicate if DMA2D transfer is aborted.+ − * @note This API can be used to indicate whether or not automatic foreground or+ − * background CLUT loading is aborted.+ − * @rmtoll CR ABORT LL_DMA2D_IsAborted+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsAborted(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_ABORT) == (DMA2D_CR_ABORT));+ − }+ − + − /**+ − * @brief Set DMA2D mode.+ − * @rmtoll CR MODE LL_DMA2D_SetMode+ − * @param DMA2Dx DMA2D Instance+ − * @param Mode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_MODE_M2M+ − * @arg @ref LL_DMA2D_MODE_M2M_PFC+ − * @arg @ref LL_DMA2D_MODE_M2M_BLEND+ − * @arg @ref LL_DMA2D_MODE_R2M+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetMode(DMA2D_TypeDef *DMA2Dx, uint32_t Mode)+ − {+ − MODIFY_REG(DMA2Dx->CR, DMA2D_CR_MODE, Mode);+ − }+ − + − /**+ − * @brief Return DMA2D mode+ − * @rmtoll CR MODE LL_DMA2D_GetMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_MODE_M2M+ − * @arg @ref LL_DMA2D_MODE_M2M_PFC+ − * @arg @ref LL_DMA2D_MODE_M2M_BLEND+ − * @arg @ref LL_DMA2D_MODE_R2M+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->CR, DMA2D_CR_MODE));+ − }+ − + − /**+ − * @brief Set DMA2D output color mode.+ − * @rmtoll OPFCCR CM LL_DMA2D_SetOutputColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @param ColorMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetOutputColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)+ − {+ − MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, ColorMode);+ − }+ − + − /**+ − * @brief Return DMA2D output color mode.+ − * @rmtoll OPFCCR CM LL_DMA2D_GetOutputColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColorMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM));+ − }+ − + − /**+ − * @brief Set DMA2D line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll OOR LO LL_DMA2D_SetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)+ − {+ − MODIFY_REG(DMA2Dx->OOR, DMA2D_OOR_LO, LineOffset);+ − }+ − + − /**+ − * @brief Return DMA2D line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll OOR LO LL_DMA2D_GetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @retval Line offset value between Min_Data=0 and Max_Data=0x3FFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetLineOffset(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->OOR, DMA2D_OOR_LO));+ − }+ − + − /**+ − * @brief Set DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits).+ − * @rmtoll NLR PL LL_DMA2D_SetNbrOfPixelsPerLines+ − * @param DMA2Dx DMA2D Instance+ − * @param NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfPixelsPerLines)+ − {+ − MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_PL, (NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D number of pixels per lines, expressed on 14 bits ([13:0] bits)+ − * @rmtoll NLR PL LL_DMA2D_GetNbrOfPixelsPerLines+ − * @param DMA2Dx DMA2D Instance+ − * @retval Number of pixels per lines value between Min_Data=0 and Max_Data=0x3FFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfPixelsPerLines(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_PL) >> DMA2D_NLR_PL_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D number of lines, expressed on 16 bits ([15:0] bits).+ − * @rmtoll NLR NL LL_DMA2D_SetNbrOfLines+ − * @param DMA2Dx DMA2D Instance+ − * @param NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetNbrOfLines(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines)+ − {+ − MODIFY_REG(DMA2Dx->NLR, DMA2D_NLR_NL, NbrOfLines);+ − }+ − + − /**+ − * @brief Return DMA2D number of lines, expressed on 16 bits ([15:0] bits).+ − * @rmtoll NLR NL LL_DMA2D_GetNbrOfLines+ − * @param DMA2Dx DMA2D Instance+ − * @retval Number of lines value between Min_Data=0 and Max_Data=0xFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetNbrOfLines(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->NLR, DMA2D_NLR_NL));+ − }+ − + − /**+ − * @brief Set DMA2D output memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll OMAR MA LL_DMA2D_SetOutputMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @param OutputMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetOutputMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t OutputMemoryAddress)+ − {+ − LL_DMA2D_WriteReg(DMA2Dx, OMAR, OutputMemoryAddress);+ − }+ − + − /**+ − * @brief Get DMA2D output memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll OMAR MA LL_DMA2D_GetOutputMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @retval Output memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetOutputMemAddr(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, OMAR));+ − }+ − + − /**+ − * @brief Set DMA2D output color, expressed on 32 bits ([31:0] bits).+ − * @note Output color format depends on output color mode, ARGB8888, RGB888,+ − * RGB565, ARGB1555 or ARGB4444.+ − * @note LL_DMA2D_ConfigOutputColor() API may be used instead if colors values formatting+ − * with respect to color mode is not done by the user code.+ − * @rmtoll OCOLR BLUE LL_DMA2D_SetOutputColor\n+ − * OCOLR GREEN LL_DMA2D_SetOutputColor\n+ − * OCOLR RED LL_DMA2D_SetOutputColor\n+ − * OCOLR ALPHA LL_DMA2D_SetOutputColor+ − * @param DMA2Dx DMA2D Instance+ − * @param OutputColor Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetOutputColor(DMA2D_TypeDef *DMA2Dx, uint32_t OutputColor)+ − {+ − MODIFY_REG(DMA2Dx->OCOLR, (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1), \+ − OutputColor);+ − }+ − + − /**+ − * @brief Get DMA2D output color, expressed on 32 bits ([31:0] bits).+ − * @note Alpha channel and red, green, blue color values must be retrieved from the returned+ − * value based on the output color mode (ARGB8888, RGB888, RGB565, ARGB1555 or ARGB4444)+ − * as set by @ref LL_DMA2D_SetOutputColorMode.+ − * @rmtoll OCOLR BLUE LL_DMA2D_GetOutputColor\n+ − * OCOLR GREEN LL_DMA2D_GetOutputColor\n+ − * OCOLR RED LL_DMA2D_GetOutputColor\n+ − * OCOLR ALPHA LL_DMA2D_GetOutputColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Output color value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetOutputColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->OCOLR, \+ − (DMA2D_OCOLR_BLUE_1 | DMA2D_OCOLR_GREEN_1 | DMA2D_OCOLR_RED_1 | DMA2D_OCOLR_ALPHA_1)));+ − }+ − + − /**+ − * @brief Set DMA2D line watermark, expressed on 16 bits ([15:0] bits).+ − * @rmtoll LWR LW LL_DMA2D_SetLineWatermark+ − * @param DMA2Dx DMA2D Instance+ − * @param LineWatermark Value between Min_Data=0 and Max_Data=0xFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetLineWatermark(DMA2D_TypeDef *DMA2Dx, uint32_t LineWatermark)+ − {+ − MODIFY_REG(DMA2Dx->LWR, DMA2D_LWR_LW, LineWatermark);+ − }+ − + − /**+ − * @brief Return DMA2D line watermark, expressed on 16 bits ([15:0] bits).+ − * @rmtoll LWR LW LL_DMA2D_GetLineWatermark+ − * @param DMA2Dx DMA2D Instance+ − * @retval Line watermark value between Min_Data=0 and Max_Data=0xFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetLineWatermark(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->LWR, DMA2D_LWR_LW));+ − }+ − + − /**+ − * @brief Set DMA2D dead time, expressed on 8 bits ([7:0] bits).+ − * @rmtoll AMTCR DT LL_DMA2D_SetDeadTime+ − * @param DMA2Dx DMA2D Instance+ − * @param DeadTime Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_SetDeadTime(DMA2D_TypeDef *DMA2Dx, uint32_t DeadTime)+ − {+ − MODIFY_REG(DMA2Dx->AMTCR, DMA2D_AMTCR_DT, (DeadTime << DMA2D_AMTCR_DT_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D dead time, expressed on 8 bits ([7:0] bits).+ − * @rmtoll AMTCR DT LL_DMA2D_GetDeadTime+ − * @param DMA2Dx DMA2D Instance+ − * @retval Dead time value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_GetDeadTime(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_DT) >> DMA2D_AMTCR_DT_Pos);+ − }+ − + − /**+ − * @brief Enable DMA2D dead time functionality.+ − * @rmtoll AMTCR EN LL_DMA2D_EnableDeadTime+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableDeadTime(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN);+ − }+ − + − /**+ − * @brief Disable DMA2D dead time functionality.+ − * @rmtoll AMTCR EN LL_DMA2D_DisableDeadTime+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableDeadTime(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN);+ − }+ − + − /**+ − * @brief Indicate if DMA2D dead time functionality is enabled.+ − * @rmtoll AMTCR EN LL_DMA2D_IsEnabledDeadTime+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledDeadTime(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->AMTCR, DMA2D_AMTCR_EN) == (DMA2D_AMTCR_EN));+ − }+ − + − /** @defgroup DMA2D_LL_EF_FGND_Configuration Foreground Configuration Functions+ − * @{+ − */+ − + − /**+ − * @brief Set DMA2D foreground memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll FGMAR MA LL_DMA2D_FGND_SetMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress)+ − {+ − LL_DMA2D_WriteReg(DMA2Dx, FGMAR, MemoryAddress);+ − }+ − + − /**+ − * @brief Get DMA2D foreground memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll FGMAR MA LL_DMA2D_FGND_GetMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @retval Foreground memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGMAR));+ − }+ − + − /**+ − * @brief Enable DMA2D foreground CLUT loading.+ − * @rmtoll FGPFCCR START LL_DMA2D_FGND_EnableCLUTLoad+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START);+ − }+ − + − /**+ − * @brief Indicate if DMA2D foreground CLUT loading is enabled.+ − * @rmtoll FGPFCCR START LL_DMA2D_FGND_IsEnabledCLUTLoad+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_START) == (DMA2D_FGPFCCR_START));+ − }+ − + − /**+ − * @brief Set DMA2D foreground color mode.+ − * @rmtoll FGPFCCR CM LL_DMA2D_FGND_SetColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @param ColorMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444+ − * @arg @ref LL_DMA2D_INPUT_MODE_L8+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL44+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL88+ − * @arg @ref LL_DMA2D_INPUT_MODE_L4+ − * @arg @ref LL_DMA2D_INPUT_MODE_A8+ − * @arg @ref LL_DMA2D_INPUT_MODE_A4+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)+ − {+ − MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM, ColorMode);+ − }+ − + − /**+ − * @brief Return DMA2D foreground color mode.+ − * @rmtoll FGPFCCR CM LL_DMA2D_FGND_GetColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444+ − * @arg @ref LL_DMA2D_INPUT_MODE_L8+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL44+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL88+ − * @arg @ref LL_DMA2D_INPUT_MODE_L4+ − * @arg @ref LL_DMA2D_INPUT_MODE_A8+ − * @arg @ref LL_DMA2D_INPUT_MODE_A4+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetColorMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CM));+ − }+ − + − /**+ − * @brief Set DMA2D foreground alpha mode.+ − * @rmtoll FGPFCCR AM LL_DMA2D_FGND_SetAlphaMode+ − * @param DMA2Dx DMA2D Instance+ − * @param AphaMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF+ − * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE+ − * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode)+ − {+ − MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM, AphaMode);+ − }+ − + − /**+ − * @brief Return DMA2D foreground alpha mode.+ − * @rmtoll FGPFCCR AM LL_DMA2D_FGND_GetAlphaMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF+ − * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE+ − * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_AM));+ − }+ − + − /**+ − * @brief Set DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_SetAlpha+ − * @param DMA2Dx DMA2D Instance+ − * @param Alpha Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha)+ − {+ − MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA, (Alpha << DMA2D_FGPFCCR_ALPHA_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D foreground alpha value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGPFCCR ALPHA LL_DMA2D_FGND_GetAlpha+ − * @param DMA2Dx DMA2D Instance+ − * @retval Alpha value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetAlpha(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_ALPHA) >> DMA2D_FGPFCCR_ALPHA_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D foreground line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll FGOR LO LL_DMA2D_FGND_SetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)+ − {+ − MODIFY_REG(DMA2Dx->FGOR, DMA2D_FGOR_LO, LineOffset);+ − }+ − + − /**+ − * @brief Return DMA2D foreground line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll FGOR LO LL_DMA2D_FGND_GetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @retval Foreground line offset value between Min_Data=0 and Max_Data=0x3FF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGOR, DMA2D_FGOR_LO));+ − }+ − + − /**+ − * @brief Set DMA2D foreground color values, expressed on 24 bits ([23:0] bits).+ − * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetColor+ − * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetColor+ − * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Red Value between Min_Data=0 and Max_Data=0xFF+ − * @param Green Value between Min_Data=0 and Max_Data=0xFF+ − * @param Blue Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue)+ − {+ − MODIFY_REG(DMA2Dx->FGCOLR, (DMA2D_FGCOLR_RED | DMA2D_FGCOLR_GREEN | DMA2D_FGCOLR_BLUE), \+ − ((Red << DMA2D_FGCOLR_RED_Pos) | (Green << DMA2D_FGCOLR_GREEN_Pos) | Blue));+ − }+ − + − /**+ − * @brief Set DMA2D foreground red color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR RED LL_DMA2D_FGND_SetRedColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Red Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red)+ − {+ − MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED, (Red << DMA2D_FGCOLR_RED_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D foreground red color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR RED LL_DMA2D_FGND_GetRedColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Red color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetRedColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_RED) >> DMA2D_FGCOLR_RED_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D foreground green color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_SetGreenColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Green Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green)+ − {+ − MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN, (Green << DMA2D_FGCOLR_GREEN_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D foreground green color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR GREEN LL_DMA2D_FGND_GetGreenColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Green color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_GREEN) >> DMA2D_FGCOLR_GREEN_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_SetBlueColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Blue Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue)+ − {+ − MODIFY_REG(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE, Blue);+ − }+ − + − /**+ − * @brief Return DMA2D foreground blue color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGCOLR BLUE LL_DMA2D_FGND_GetBlueColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Blue color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGCOLR, DMA2D_FGCOLR_BLUE));+ − }+ − + − /**+ − * @brief Set DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll FGCMAR MA LL_DMA2D_FGND_SetCLUTMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress)+ − {+ − LL_DMA2D_WriteReg(DMA2Dx, FGCMAR, CLUTMemoryAddress);+ − }+ − + − /**+ − * @brief Get DMA2D foreground CLUT memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll FGCMAR MA LL_DMA2D_FGND_GetCLUTMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @retval Foreground CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, FGCMAR));+ − }+ − + − /**+ − * @brief Set DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGPFCCR CS LL_DMA2D_FGND_SetCLUTSize+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize)+ − {+ − MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS, (CLUTSize << DMA2D_FGPFCCR_CS_Pos));+ − }+ − + − /**+ − * @brief Get DMA2D foreground CLUT size, expressed on 8 bits ([7:0] bits).+ − * @rmtoll FGPFCCR CS LL_DMA2D_FGND_GetCLUTSize+ − * @param DMA2Dx DMA2D Instance+ − * @retval Foreground CLUT size value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CS) >> DMA2D_FGPFCCR_CS_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D foreground CLUT color mode.+ − * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_SetCLUTColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTColorMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_FGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode)+ − {+ − MODIFY_REG(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM, CLUTColorMode);+ − }+ − + − /**+ − * @brief Return DMA2D foreground CLUT color mode.+ − * @rmtoll FGPFCCR CCM LL_DMA2D_FGND_GetCLUTColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_FGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->FGPFCCR, DMA2D_FGPFCCR_CCM));+ − }+ − + − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EF_BGND_Configuration Background Configuration Functions+ − * @{+ − */+ − + − /**+ − * @brief Set DMA2D background memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll BGMAR MA LL_DMA2D_BGND_SetMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @param MemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t MemoryAddress)+ − {+ − LL_DMA2D_WriteReg(DMA2Dx, BGMAR, MemoryAddress);+ − }+ − + − /**+ − * @brief Get DMA2D background memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll BGMAR MA LL_DMA2D_BGND_GetMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @retval Background memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetMemAddr(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGMAR));+ − }+ − + − /**+ − * @brief Enable DMA2D background CLUT loading.+ − * @rmtoll BGPFCCR START LL_DMA2D_BGND_EnableCLUTLoad+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_EnableCLUTLoad(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START);+ − }+ − + − /**+ − * @brief Indicate if DMA2D background CLUT loading is enabled.+ − * @rmtoll BGPFCCR START LL_DMA2D_BGND_IsEnabledCLUTLoad+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_START) == (DMA2D_BGPFCCR_START));+ − }+ − + − /**+ − * @brief Set DMA2D background color mode.+ − * @rmtoll BGPFCCR CM LL_DMA2D_BGND_SetColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @param ColorMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444+ − * @arg @ref LL_DMA2D_INPUT_MODE_L8+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL44+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL88+ − * @arg @ref LL_DMA2D_INPUT_MODE_L4+ − * @arg @ref LL_DMA2D_INPUT_MODE_A8+ − * @arg @ref LL_DMA2D_INPUT_MODE_A4+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)+ − {+ − MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM, ColorMode);+ − }+ − + − /**+ − * @brief Return DMA2D background color mode.+ − * @rmtoll BGPFCCR CM LL_DMA2D_BGND_GetColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB888+ − * @arg @ref LL_DMA2D_INPUT_MODE_RGB565+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB1555+ − * @arg @ref LL_DMA2D_INPUT_MODE_ARGB4444+ − * @arg @ref LL_DMA2D_INPUT_MODE_L8+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL44+ − * @arg @ref LL_DMA2D_INPUT_MODE_AL88+ − * @arg @ref LL_DMA2D_INPUT_MODE_L4+ − * @arg @ref LL_DMA2D_INPUT_MODE_A8+ − * @arg @ref LL_DMA2D_INPUT_MODE_A4+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetColorMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CM));+ − }+ − + − /**+ − * @brief Set DMA2D background alpha mode.+ − * @rmtoll BGPFCCR AM LL_DMA2D_BGND_SetAlphaMode+ − * @param DMA2Dx DMA2D Instance+ − * @param AphaMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF+ − * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE+ − * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetAlphaMode(DMA2D_TypeDef *DMA2Dx, uint32_t AphaMode)+ − {+ − MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM, AphaMode);+ − }+ − + − /**+ − * @brief Return DMA2D background alpha mode.+ − * @rmtoll BGPFCCR AM LL_DMA2D_BGND_GetAlphaMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_ALPHA_MODE_NO_MODIF+ − * @arg @ref LL_DMA2D_ALPHA_MODE_REPLACE+ − * @arg @ref LL_DMA2D_ALPHA_MODE_COMBINE+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlphaMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_AM));+ − }+ − + − /**+ − * @brief Set DMA2D background alpha value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_SetAlpha+ − * @param DMA2Dx DMA2D Instance+ − * @param Alpha Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetAlpha(DMA2D_TypeDef *DMA2Dx, uint32_t Alpha)+ − {+ − MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA, (Alpha << DMA2D_BGPFCCR_ALPHA_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D background alpha value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGPFCCR ALPHA LL_DMA2D_BGND_GetAlpha+ − * @param DMA2Dx DMA2D Instance+ − * @retval Alpha value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetAlpha(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_ALPHA) >> DMA2D_BGPFCCR_ALPHA_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D background line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll BGOR LO LL_DMA2D_BGND_SetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @param LineOffset Value between Min_Data=0 and Max_Data=0x3FF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetLineOffset(DMA2D_TypeDef *DMA2Dx, uint32_t LineOffset)+ − {+ − MODIFY_REG(DMA2Dx->BGOR, DMA2D_BGOR_LO, LineOffset);+ − }+ − + − /**+ − * @brief Return DMA2D background line offset, expressed on 14 bits ([13:0] bits).+ − * @rmtoll BGOR LO LL_DMA2D_BGND_GetLineOffset+ − * @param DMA2Dx DMA2D Instance+ − * @retval Background line offset value between Min_Data=0 and Max_Data=0x3FF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetLineOffset(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGOR, DMA2D_BGOR_LO));+ − }+ − + − /**+ − * @brief Set DMA2D background color values, expressed on 24 bits ([23:0] bits).+ − * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetColor+ − * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetColor+ − * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Red Value between Min_Data=0 and Max_Data=0xFF+ − * @param Green Value between Min_Data=0 and Max_Data=0xFF+ − * @param Blue Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red, uint32_t Green, uint32_t Blue)+ − {+ − MODIFY_REG(DMA2Dx->BGCOLR, (DMA2D_BGCOLR_RED | DMA2D_BGCOLR_GREEN | DMA2D_BGCOLR_BLUE), \+ − ((Red << DMA2D_BGCOLR_RED_Pos) | (Green << DMA2D_BGCOLR_GREEN_Pos) | Blue));+ − }+ − + − /**+ − * @brief Set DMA2D background red color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR RED LL_DMA2D_BGND_SetRedColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Red Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t Red)+ − {+ − MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED, (Red << DMA2D_BGCOLR_RED_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D background red color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR RED LL_DMA2D_BGND_GetRedColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Red color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetRedColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_RED) >> DMA2D_BGCOLR_RED_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D background green color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_SetGreenColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Green Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t Green)+ − {+ − MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN, (Green << DMA2D_BGCOLR_GREEN_Pos));+ − }+ − + − /**+ − * @brief Return DMA2D background green color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR GREEN LL_DMA2D_BGND_GetGreenColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Green color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetGreenColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_GREEN) >> DMA2D_BGCOLR_GREEN_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D background blue color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_SetBlueColor+ − * @param DMA2Dx DMA2D Instance+ − * @param Blue Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t Blue)+ − {+ − MODIFY_REG(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE, Blue);+ − }+ − + − /**+ − * @brief Return DMA2D background blue color value, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGCOLR BLUE LL_DMA2D_BGND_GetBlueColor+ − * @param DMA2Dx DMA2D Instance+ − * @retval Blue color value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetBlueColor(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGCOLR, DMA2D_BGCOLR_BLUE));+ − }+ − + − /**+ − * @brief Set DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll BGCMAR MA LL_DMA2D_BGND_SetCLUTMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTMemoryAddress Value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTMemoryAddress)+ − {+ − LL_DMA2D_WriteReg(DMA2Dx, BGCMAR, CLUTMemoryAddress);+ − }+ − + − /**+ − * @brief Get DMA2D background CLUT memory address, expressed on 32 bits ([31:0] bits).+ − * @rmtoll BGCMAR MA LL_DMA2D_BGND_GetCLUTMemAddr+ − * @param DMA2Dx DMA2D Instance+ − * @retval Background CLUT memory address value between Min_Data=0 and Max_Data=0xFFFFFFFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTMemAddr(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(LL_DMA2D_ReadReg(DMA2Dx, BGCMAR));+ − }+ − + − /**+ − * @brief Set DMA2D background CLUT size, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGPFCCR CS LL_DMA2D_BGND_SetCLUTSize+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTSize Value between Min_Data=0 and Max_Data=0xFF+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTSize(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTSize)+ − {+ − MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS, (CLUTSize << DMA2D_BGPFCCR_CS_Pos));+ − }+ − + − /**+ − * @brief Get DMA2D background CLUT size, expressed on 8 bits ([7:0] bits).+ − * @rmtoll BGPFCCR CS LL_DMA2D_BGND_GetCLUTSize+ − * @param DMA2Dx DMA2D Instance+ − * @retval Background CLUT size value between Min_Data=0 and Max_Data=0xFF+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTSize(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CS) >> DMA2D_BGPFCCR_CS_Pos);+ − }+ − + − /**+ − * @brief Set DMA2D background CLUT color mode.+ − * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_SetCLUTColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @param CLUTColorMode This parameter can be one of the following values:+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_BGND_SetCLUTColorMode(DMA2D_TypeDef *DMA2Dx, uint32_t CLUTColorMode)+ − {+ − MODIFY_REG(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM, CLUTColorMode);+ − }+ − + − /**+ − * @brief Return DMA2D background CLUT color mode.+ − * @rmtoll BGPFCCR CCM LL_DMA2D_BGND_GetCLUTColorMode+ − * @param DMA2Dx DMA2D Instance+ − * @retval Returned value can be one of the following values:+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_ARGB8888+ − * @arg @ref LL_DMA2D_CLUT_COLOR_MODE_RGB888+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_BGND_GetCLUTColorMode(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (uint32_t)(READ_BIT(DMA2Dx->BGPFCCR, DMA2D_BGPFCCR_CCM));+ − }+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − + − /** @defgroup DMA2D_LL_EF_FLAG_MANAGEMENT Flag Management+ − * @{+ − */+ − + − /**+ − * @brief Check if the DMA2D Configuration Error Interrupt Flag is set or not+ − * @rmtoll ISR CEIF LL_DMA2D_IsActiveFlag_CE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CEIF) == (DMA2D_ISR_CEIF));+ − }+ − + − /**+ − * @brief Check if the DMA2D CLUT Transfer Complete Interrupt Flag is set or not+ − * @rmtoll ISR CTCIF LL_DMA2D_IsActiveFlag_CTC+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CTC(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CTCIF) == (DMA2D_ISR_CTCIF));+ − }+ − + − /**+ − * @brief Check if the DMA2D CLUT Access Error Interrupt Flag is set or not+ − * @rmtoll ISR CAEIF LL_DMA2D_IsActiveFlag_CAE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_CAE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_CAEIF) == (DMA2D_ISR_CAEIF));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Watermark Interrupt Flag is set or not+ − * @rmtoll ISR TWIF LL_DMA2D_IsActiveFlag_TW+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TW(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TWIF) == (DMA2D_ISR_TWIF));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Complete Interrupt Flag is set or not+ − * @rmtoll ISR TCIF LL_DMA2D_IsActiveFlag_TC+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TC(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TCIF) == (DMA2D_ISR_TCIF));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Error Interrupt Flag is set or not+ − * @rmtoll ISR TEIF LL_DMA2D_IsActiveFlag_TE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsActiveFlag_TE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->ISR, DMA2D_ISR_TEIF) == (DMA2D_ISR_TEIF));+ − }+ − + − /**+ − * @brief Clear DMA2D Configuration Error Interrupt Flag+ − * @rmtoll IFCR CCEIF LL_DMA2D_ClearFlag_CE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_CE(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCEIF);+ − }+ − + − /**+ − * @brief Clear DMA2D CLUT Transfer Complete Interrupt Flag+ − * @rmtoll IFCR CCTCIF LL_DMA2D_ClearFlag_CTC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_CTC(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CCTCIF);+ − }+ − + − /**+ − * @brief Clear DMA2D CLUT Access Error Interrupt Flag+ − * @rmtoll IFCR CAECIF LL_DMA2D_ClearFlag_CAE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_CAE(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CAECIF);+ − }+ − + − /**+ − * @brief Clear DMA2D Transfer Watermark Interrupt Flag+ − * @rmtoll IFCR CTWIF LL_DMA2D_ClearFlag_TW+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_TW(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTWIF);+ − }+ − + − /**+ − * @brief Clear DMA2D Transfer Complete Interrupt Flag+ − * @rmtoll IFCR CTCIF LL_DMA2D_ClearFlag_TC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_TC(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTCIF);+ − }+ − + − /**+ − * @brief Clear DMA2D Transfer Error Interrupt Flag+ − * @rmtoll IFCR CTEIF LL_DMA2D_ClearFlag_TE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_ClearFlag_TE(DMA2D_TypeDef *DMA2Dx)+ − {+ − WRITE_REG(DMA2Dx->IFCR, DMA2D_IFCR_CTEIF);+ − }+ − + − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_LL_EF_IT_MANAGEMENT Interruption Management+ − * @{+ − */+ − + − /**+ − * @brief Enable Configuration Error Interrupt+ − * @rmtoll CR CEIE LL_DMA2D_EnableIT_CE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_CE(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_CEIE);+ − }+ − + − /**+ − * @brief Enable CLUT Transfer Complete Interrupt+ − * @rmtoll CR CTCIE LL_DMA2D_EnableIT_CTC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_CTC(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE);+ − }+ − + − /**+ − * @brief Enable CLUT Access Error Interrupt+ − * @rmtoll CR CAEIE LL_DMA2D_EnableIT_CAE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_CAE(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE);+ − }+ − + − /**+ − * @brief Enable Transfer Watermark Interrupt+ − * @rmtoll CR TWIE LL_DMA2D_EnableIT_TW+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_TW(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_TWIE);+ − }+ − + − /**+ − * @brief Enable Transfer Complete Interrupt+ − * @rmtoll CR TCIE LL_DMA2D_EnableIT_TC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_TC(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_TCIE);+ − }+ − + − /**+ − * @brief Enable Transfer Error Interrupt+ − * @rmtoll CR TEIE LL_DMA2D_EnableIT_TE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_EnableIT_TE(DMA2D_TypeDef *DMA2Dx)+ − {+ − SET_BIT(DMA2Dx->CR, DMA2D_CR_TEIE);+ − }+ − + − /**+ − * @brief Disable Configuration Error Interrupt+ − * @rmtoll CR CEIE LL_DMA2D_DisableIT_CE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_CE(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CEIE);+ − }+ − + − /**+ − * @brief Disable CLUT Transfer Complete Interrupt+ − * @rmtoll CR CTCIE LL_DMA2D_DisableIT_CTC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_CTC(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE);+ − }+ − + − /**+ − * @brief Disable CLUT Access Error Interrupt+ − * @rmtoll CR CAEIE LL_DMA2D_DisableIT_CAE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_CAE(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE);+ − }+ − + − /**+ − * @brief Disable Transfer Watermark Interrupt+ − * @rmtoll CR TWIE LL_DMA2D_DisableIT_TW+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_TW(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TWIE);+ − }+ − + − /**+ − * @brief Disable Transfer Complete Interrupt+ − * @rmtoll CR TCIE LL_DMA2D_DisableIT_TC+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_TC(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TCIE);+ − }+ − + − /**+ − * @brief Disable Transfer Error Interrupt+ − * @rmtoll CR TEIE LL_DMA2D_DisableIT_TE+ − * @param DMA2Dx DMA2D Instance+ − * @retval None+ − */+ − __STATIC_INLINE void LL_DMA2D_DisableIT_TE(DMA2D_TypeDef *DMA2Dx)+ − {+ − CLEAR_BIT(DMA2Dx->CR, DMA2D_CR_TEIE);+ − }+ − + − /**+ − * @brief Check if the DMA2D Configuration Error interrupt source is enabled or disabled.+ − * @rmtoll CR CEIE LL_DMA2D_IsEnabledIT_CE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CEIE) == (DMA2D_CR_CEIE));+ − }+ − + − /**+ − * @brief Check if the DMA2D CLUT Transfer Complete interrupt source is enabled or disabled.+ − * @rmtoll CR CTCIE LL_DMA2D_IsEnabledIT_CTC+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CTC(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CTCIE) == (DMA2D_CR_CTCIE));+ − }+ − + − /**+ − * @brief Check if the DMA2D CLUT Access Error interrupt source is enabled or disabled.+ − * @rmtoll CR CAEIE LL_DMA2D_IsEnabledIT_CAE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_CAE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_CAEIE) == (DMA2D_CR_CAEIE));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Watermark interrupt source is enabled or disabled.+ − * @rmtoll CR TWIE LL_DMA2D_IsEnabledIT_TW+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TW(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TWIE) == (DMA2D_CR_TWIE));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Complete interrupt source is enabled or disabled.+ − * @rmtoll CR TCIE LL_DMA2D_IsEnabledIT_TC+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TC(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TCIE) == (DMA2D_CR_TCIE));+ − }+ − + − /**+ − * @brief Check if the DMA2D Transfer Error interrupt source is enabled or disabled.+ − * @rmtoll CR TEIE LL_DMA2D_IsEnabledIT_TE+ − * @param DMA2Dx DMA2D Instance+ − * @retval State of bit (1 or 0).+ − */+ − __STATIC_INLINE uint32_t LL_DMA2D_IsEnabledIT_TE(DMA2D_TypeDef *DMA2Dx)+ − {+ − return (READ_BIT(DMA2Dx->CR, DMA2D_CR_TEIE) == (DMA2D_CR_TEIE));+ − }+ − + − + − + − /**+ − * @}+ − */+ − + − #if defined(USE_FULL_LL_DRIVER)+ − /** @defgroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions+ − * @{+ − */+ − + − ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx);+ − ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct);+ − void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct);+ − void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx);+ − void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg);+ − void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct);+ − uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);+ − uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);+ − uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);+ − uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode);+ − void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines);+ − + − /**+ − * @}+ − */+ − #endif /* USE_FULL_LL_DRIVER */+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − #endif /* defined (DMA2D) */+ − + − /**+ − * @}+ − */+ − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /* __STM32F4xx_LL_DMA2D_H */+ − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
