/**+
−
  ******************************************************************************+
−
  * @file    stm32f4xx_hal_sd.h+
−
  * @author  MCD Application Team+
−
  * @brief   Header file of SD HAL module.+
−
  ******************************************************************************+
−
  * @attention+
−
  *+
−
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+
−
  *+
−
  * Redistribution and use in source and binary forms, with or without modification,+
−
  * are permitted provided that the following conditions are met:+
−
  *   1. Redistributions of source code must retain the above copyright notice,+
−
  *      this list of conditions and the following disclaimer.+
−
  *   2. Redistributions in binary form must reproduce the above copyright notice,+
−
  *      this list of conditions and the following disclaimer in the documentation+
−
  *      and/or other materials provided with the distribution.+
−
  *   3. Neither the name of STMicroelectronics nor the names of its contributors+
−
  *      may be used to endorse or promote products derived from this software+
−
  *      without specific prior written permission.+
−
  *+
−
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+
−
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+
−
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+
−
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+
−
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+
−
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+
−
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+
−
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+
−
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+
−
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+
−
  *+
−
  ******************************************************************************+
−
  */ +
−
+
−
/* Define to prevent recursive inclusion -------------------------------------*/+
−
#ifndef __STM32F4xx_HAL_SD_H+
−
#define __STM32F4xx_HAL_SD_H+
−
+
−
#ifdef __cplusplus+
−
 extern "C" {+
−
#endif+
−
+
−
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \+
−
    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \+
−
    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \+
−
    defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \+
−
    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)+
−
+
−
/* Includes ------------------------------------------------------------------*/+
−
#include "stm32f4xx_ll_sdmmc.h"+
−
+
−
/** @addtogroup STM32F4xx_HAL_Driver+
−
  * @{+
−
  */+
−
+
−
/** @defgroup SD SD+
−
  * @brief SD HAL module driver+
−
  * @{+
−
  */ +
−
+
−
/* Exported types ------------------------------------------------------------*/ +
−
/** @defgroup SD_Exported_Types SD Exported Types+
−
  * @{+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure+
−
  * @{+
−
  */   +
−
typedef enum+
−
{+
−
  HAL_SD_STATE_RESET                  = 0x00000000U,  /*!< SD not yet initialized or disabled  */+
−
  HAL_SD_STATE_READY                  = 0x00000001U,  /*!< SD initialized and ready for use    */+
−
  HAL_SD_STATE_TIMEOUT                = 0x00000002U,  /*!< SD Timeout state                    */+
−
  HAL_SD_STATE_BUSY                   = 0x00000003U,  /*!< SD process ongoing                  */+
−
  HAL_SD_STATE_PROGRAMMING            = 0x00000004U,  /*!< SD Programming State                */+
−
  HAL_SD_STATE_RECEIVING              = 0x00000005U,  /*!< SD Receinving State                 */+
−
  HAL_SD_STATE_TRANSFER               = 0x00000006U,  /*!< SD Transfert State                  */+
−
  HAL_SD_STATE_ERROR                  = 0x0000000FU   /*!< SD is in error state                */+
−
}HAL_SD_StateTypeDef;+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure+
−
  * @{+
−
  */   +
−
typedef enum+
−
{+
−
  HAL_SD_CARD_READY                  = 0x00000001U,  /*!< Card state is ready                     */+
−
  HAL_SD_CARD_IDENTIFICATION         = 0x00000002U,  /*!< Card is in identification state         */+
−
  HAL_SD_CARD_STANDBY                = 0x00000003U,  /*!< Card is in standby state                */+
−
  HAL_SD_CARD_TRANSFER               = 0x00000004U,  /*!< Card is in transfer state               */  +
−
  HAL_SD_CARD_SENDING                = 0x00000005U,  /*!< Card is sending an operation            */+
−
  HAL_SD_CARD_RECEIVING              = 0x00000006U,  /*!< Card is receiving operation information */+
−
  HAL_SD_CARD_PROGRAMMING            = 0x00000007U,  /*!< Card is in programming state            */+
−
  HAL_SD_CARD_DISCONNECTED           = 0x00000008U,  /*!< Card is disconnected                    */+
−
  HAL_SD_CARD_ERROR                  = 0x000000FFU   /*!< Card response Error                     */+
−
}HAL_SD_CardStateTypeDef;+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition   +
−
  * @{+
−
  */+
−
#define SD_InitTypeDef      SDIO_InitTypeDef +
−
#define SD_TypeDef          SDIO_TypeDef+
−
+
−
/** +
−
  * @brief  SD Card Information Structure definition+
−
  */ +
−
typedef struct+
−
{+
−
  uint32_t CardType;                     /*!< Specifies the card Type                         */+
−
  +
−
  uint32_t CardVersion;                  /*!< Specifies the card version                      */+
−
+
−
  uint32_t Class;                        /*!< Specifies the class of the card class           */+
−
+
−
  uint32_t RelCardAdd;                   /*!< Specifies the Relative Card Address             */+
−
  +
−
  uint32_t BlockNbr;                     /*!< Specifies the Card Capacity in blocks           */+
−
+
−
  uint32_t BlockSize;                    /*!< Specifies one block size in bytes               */+
−
  +
−
  uint32_t LogBlockNbr;                  /*!< Specifies the Card logical Capacity in blocks   */+
−
+
−
  uint32_t LogBlockSize;                 /*!< Specifies logical block size in bytes           */+
−
+
−
}HAL_SD_CardInfoTypeDef;+
−
+
−
/** +
−
  * @brief  SD handle Structure definition+
−
  */ +
−
typedef struct+
−
{+
−
  SD_TypeDef                   *Instance;        /*!< SD registers base address           */+
−
  +
−
  SD_InitTypeDef               Init;             /*!< SD required parameters              */+
−
  +
−
  HAL_LockTypeDef              Lock;             /*!< SD locking object                   */+
−
  +
−
  uint32_t                     *pTxBuffPtr;      /*!< Pointer to SD Tx transfer Buffer    */+
−
+
−
  uint32_t                     TxXferSize;       /*!< SD Tx Transfer size                 */+
−
+
−
  uint32_t                     *pRxBuffPtr;      /*!< Pointer to SD Rx transfer Buffer    */+
−
+
−
  uint32_t                     RxXferSize;       /*!< SD Rx Transfer size                 */+
−
  +
−
  __IO uint32_t                Context;          /*!< SD transfer context                 */+
−
 +
−
  __IO HAL_SD_StateTypeDef     State;            /*!< SD card State                       */+
−
  +
−
  __IO uint32_t                ErrorCode;        /*!< SD Card Error codes                 */  +
−
 +
−
  DMA_HandleTypeDef            *hdmarx;          /*!< SD Rx DMA handle parameters         */+
−
  +
−
  DMA_HandleTypeDef            *hdmatx;          /*!< SD Tx DMA handle parameters         */+
−
  +
−
  HAL_SD_CardInfoTypeDef       SdCard;           /*!< SD Card information                 */+
−
  +
−
  uint32_t                     CSD[4];           /*!< SD card specific data table         */+
−
  +
−
  uint32_t                     CID[4];           /*!< SD card identification number table */+
−
  +
−
}SD_HandleTypeDef;+
−
+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register +
−
  * @{+
−
  */+
−
typedef struct+
−
{+
−
  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */+
−
  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */+
−
  __IO uint8_t  Reserved1;            /*!< Reserved                              */+
−
  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */+
−
  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */+
−
  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */+
−
  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */+
−
  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */+
−
  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */+
−
  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */+
−
  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */+
−
  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */+
−
  __IO uint8_t  Reserved2;            /*!< Reserved                              */+
−
  __IO uint32_t DeviceSize;           /*!< Device Size                           */+
−
  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */+
−
  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */+
−
  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */+
−
  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */+
−
  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */+
−
  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */+
−
  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */+
−
  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */+
−
  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */+
−
  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */+
−
  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */+
−
  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */+
−
  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */+
−
  __IO uint8_t  Reserved3;            /*!< Reserved                              */+
−
  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */+
−
  __IO uint8_t  FileFormatGrouop;     /*!< File format group                     */+
−
  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */+
−
  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */+
−
  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */+
−
  __IO uint8_t  FileFormat;           /*!< File format                           */+
−
  __IO uint8_t  ECC;                  /*!< ECC code                              */+
−
  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */+
−
  __IO uint8_t  Reserved4;            /*!< Always 1                              */+
−
  +
−
}HAL_SD_CardCSDTypeDef;+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register+
−
  * @{+
−
  */+
−
typedef struct+
−
{+
−
  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */+
−
  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */+
−
  __IO uint32_t ProdName1;       /*!< Product Name part1    */+
−
  __IO uint8_t  ProdName2;       /*!< Product Name part2    */+
−
  __IO uint8_t  ProdRev;         /*!< Product Revision      */+
−
  __IO uint32_t ProdSN;          /*!< Product Serial Number */+
−
  __IO uint8_t  Reserved1;       /*!< Reserved1             */+
−
  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */+
−
  __IO uint8_t  CID_CRC;         /*!< CID CRC               */+
−
  __IO uint8_t  Reserved2;       /*!< Always 1              */+
−
+
−
}HAL_SD_CardCIDTypeDef;+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 +
−
  * @{+
−
  */+
−
typedef struct+
−
{+
−
  __IO uint8_t  DataBusWidth;           /*!< Shows the currently defined data bus width                 */+
−
  __IO uint8_t  SecuredMode;            /*!< Card is in secured mode of operation                       */+
−
  __IO uint16_t CardType;               /*!< Carries information about card type                        */+
−
  __IO uint32_t ProtectedAreaSize;      /*!< Carries information about the capacity of protected area   */+
−
  __IO uint8_t  SpeedClass;             /*!< Carries information about the speed class of the card      */+
−
  __IO uint8_t  PerformanceMove;        /*!< Carries information about the card's performance move      */+
−
  __IO uint8_t  AllocationUnitSize;     /*!< Carries information about the card's allocation unit size  */+
−
  __IO uint16_t EraseSize;              /*!< Determines the number of AUs to be erased in one operation */+
−
  __IO uint8_t  EraseTimeout;           /*!< Determines the timeout for any number of AU erase          */+
−
  __IO uint8_t  EraseOffset;            /*!< Carries information about the erase offset                 */+
−
+
−
}HAL_SD_CardStatusTypeDef;+
−
/** +
−
  * @}+
−
  */+
−
+
−
/** +
−
  * @}+
−
  */+
−
+
−
/* Exported constants --------------------------------------------------------*/+
−
/** @defgroup SD_Exported_Constants Exported Constants+
−
  * @{+
−
  */+
−
+
−
#define BLOCKSIZE   512U /*!< Block size is 512 bytes */+
−
+
−
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition +
−
  * @{+
−
  */  +
−
#define HAL_SD_ERROR_NONE                     SDMMC_ERROR_NONE                    /*!< No error                                                      */+
−
#define HAL_SD_ERROR_CMD_CRC_FAIL             SDMMC_ERROR_CMD_CRC_FAIL            /*!< Command response received (but CRC check failed)              */+
−
#define HAL_SD_ERROR_DATA_CRC_FAIL            SDMMC_ERROR_DATA_CRC_FAIL           /*!< Data block sent/received (CRC check failed)                   */+
−
#define HAL_SD_ERROR_CMD_RSP_TIMEOUT          SDMMC_ERROR_CMD_RSP_TIMEOUT         /*!< Command response timeout                                      */+
−
#define HAL_SD_ERROR_DATA_TIMEOUT             SDMMC_ERROR_DATA_TIMEOUT            /*!< Data timeout                                                  */+
−
#define HAL_SD_ERROR_TX_UNDERRUN              SDMMC_ERROR_TX_UNDERRUN             /*!< Transmit FIFO underrun                                        */+
−
#define HAL_SD_ERROR_RX_OVERRUN               SDMMC_ERROR_RX_OVERRUN              /*!< Receive FIFO overrun                                          */+
−
#define HAL_SD_ERROR_ADDR_MISALIGNED          SDMMC_ERROR_ADDR_MISALIGNED         /*!< Misaligned address                                            */+
−
#define HAL_SD_ERROR_BLOCK_LEN_ERR            SDMMC_ERROR_BLOCK_LEN_ERR           /*!< Transferred block length is not allowed for the card or the +
−
                                                                                       number of transferred bytes does not match the block length   */+
−
#define HAL_SD_ERROR_ERASE_SEQ_ERR            SDMMC_ERROR_ERASE_SEQ_ERR           /*!< An error in the sequence of erase command occurs              */+
−
#define HAL_SD_ERROR_BAD_ERASE_PARAM          SDMMC_ERROR_BAD_ERASE_PARAM         /*!< An invalid selection for erase groups                         */+
−
#define HAL_SD_ERROR_WRITE_PROT_VIOLATION     SDMMC_ERROR_WRITE_PROT_VIOLATION    /*!< Attempt to program a write protect block                      */+
−
#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED       SDMMC_ERROR_LOCK_UNLOCK_FAILED      /*!< Sequence or password error has been detected in unlock +
−
                                                                                       command or if there was an attempt to access a locked card    */+
−
#define HAL_SD_ERROR_COM_CRC_FAILED           SDMMC_ERROR_COM_CRC_FAILED          /*!< CRC check of the previous command failed                      */+
−
#define HAL_SD_ERROR_ILLEGAL_CMD              SDMMC_ERROR_ILLEGAL_CMD             /*!< Command is not legal for the card state                       */+
−
#define HAL_SD_ERROR_CARD_ECC_FAILED          SDMMC_ERROR_CARD_ECC_FAILED         /*!< Card internal ECC was applied but failed to correct the data  */+
−
#define HAL_SD_ERROR_CC_ERR                   SDMMC_ERROR_CC_ERR                  /*!< Internal card controller error                                */+
−
#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR      SDMMC_ERROR_GENERAL_UNKNOWN_ERR     /*!< General or unknown error                                      */+
−
#define HAL_SD_ERROR_STREAM_READ_UNDERRUN     SDMMC_ERROR_STREAM_READ_UNDERRUN    /*!< The card could not sustain data reading in stream rmode       */+
−
#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN     SDMMC_ERROR_STREAM_WRITE_OVERRUN    /*!< The card could not sustain data programming in stream mode    */+
−
#define HAL_SD_ERROR_CID_CSD_OVERWRITE        SDMMC_ERROR_CID_CSD_OVERWRITE       /*!< CID/CSD overwrite error                                       */+
−
#define HAL_SD_ERROR_WP_ERASE_SKIP            SDMMC_ERROR_WP_ERASE_SKIP           /*!< Only partial address space was erased                         */+
−
#define HAL_SD_ERROR_CARD_ECC_DISABLED        SDMMC_ERROR_CARD_ECC_DISABLED       /*!< Command has been executed without using internal ECC          */+
−
#define HAL_SD_ERROR_ERASE_RESET              SDMMC_ERROR_ERASE_RESET             /*!< Erase sequence was cleared before executing because an out +
−
                                                                                       of erase sequence command was received                        */+
−
#define HAL_SD_ERROR_AKE_SEQ_ERR              SDMMC_ERROR_AKE_SEQ_ERR             /*!< Error in sequence of authentication                           */+
−
#define HAL_SD_ERROR_INVALID_VOLTRANGE        SDMMC_ERROR_INVALID_VOLTRANGE       /*!< Error in case of invalid voltage range                        */        +
−
#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE        SDMMC_ERROR_ADDR_OUT_OF_RANGE       /*!< Error when addressed block is out of range                    */        +
−
#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE   SDMMC_ERROR_REQUEST_NOT_APPLICABLE  /*!< Error when command request is not applicable                  */  +
−
#define HAL_SD_ERROR_PARAM                    SDMMC_ERROR_INVALID_PARAMETER       /*!< the used parameter is not valid                               */  +
−
#define HAL_SD_ERROR_UNSUPPORTED_FEATURE      SDMMC_ERROR_UNSUPPORTED_FEATURE     /*!< Error when feature is not insupported                         */+
−
#define HAL_SD_ERROR_BUSY                     SDMMC_ERROR_BUSY                    /*!< Error when transfer process is busy                           */ +
−
#define HAL_SD_ERROR_DMA                      SDMMC_ERROR_DMA                     /*!< Error while DMA transfer                                      */+
−
#define HAL_SD_ERROR_TIMEOUT                  SDMMC_ERROR_TIMEOUT                 /*!< Timeout error                                                 */+
−
                                                +
−
/** +
−
  * @}+
−
  */+
−
 +
−
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration+
−
  * @{+
−
  */ +
−
#define   SD_CONTEXT_NONE                 0x00000000U  /*!< None                             */+
−
#define   SD_CONTEXT_READ_SINGLE_BLOCK    0x00000001U  /*!< Read single block operation      */+
−
#define   SD_CONTEXT_READ_MULTIPLE_BLOCK  0x00000002U  /*!< Read multiple blocks operation   */+
−
#define   SD_CONTEXT_WRITE_SINGLE_BLOCK   0x00000010U  /*!< Write single block operation     */+
−
#define   SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U  /*!< Write multiple blocks operation  */+
−
#define   SD_CONTEXT_IT                   0x00000008U  /*!< Process in Interrupt mode        */+
−
#define   SD_CONTEXT_DMA                  0x00000080U  /*!< Process in DMA mode              */  +
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards+
−
  * @{+
−
  */+
−
#define CARD_SDSC                  0x00000000U+
−
#define CARD_SDHC_SDXC             0x00000001U+
−
#define CARD_SECURED               0x00000003U+
−
    +
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version+
−
  * @{+
−
  */+
−
#define CARD_V1_X                  0x00000000U+
−
#define CARD_V2_X                  0x00000001U+
−
/**+
−
  * @}+
−
  */+
−
      +
−
/**+
−
  * @}+
−
  */+
−
  +
−
/* Exported macro ------------------------------------------------------------*/+
−
/** @defgroup SD_Exported_macros SD Exported Macros+
−
 *  @brief macros to handle interrupts and specific clock configurations+
−
 * @{+
−
 */+
−
 +
−
/**+
−
  * @brief  Enable the SD device.+
−
  * @retval None+
−
  */ +
−
#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)+
−
+
−
/**+
−
  * @brief  Disable the SD device.+
−
  * @retval None+
−
  */+
−
#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)+
−
+
−
/**+
−
  * @brief  Enable the SDMMC DMA transfer.+
−
  * @retval None+
−
  */ +
−
#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)+
−
+
−
/**+
−
  * @brief  Disable the SDMMC DMA transfer.+
−
  * @retval None+
−
  */+
−
#define __HAL_SD_DMA_DISABLE(__HANDLE__)  __SDIO_DMA_DISABLE((__HANDLE__)->Instance)+
−
 +
−
/**+
−
  * @brief  Enable the SD device interrupt.+
−
  * @param  __HANDLE__ SD Handle  +
−
  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.+
−
  *         This parameter can be one or a combination of the following values:+
−
  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt+
−
  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt+
−
  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt+
−
  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt+
−
  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt+
−
  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt+
−
  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt+
−
  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt+
−
  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt+
−
  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt+
−
  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt+
−
  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt+
−
  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt+
−
  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt+
−
  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt+
−
  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt+
−
  * @retval None+
−
  */+
−
#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))+
−
+
−
/**+
−
  * @brief  Disable the SD device interrupt.+
−
  * @param  __HANDLE__ SD Handle   +
−
  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.+
−
  *          This parameter can be one or a combination of the following values:+
−
  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt+
−
  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt+
−
  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt+
−
  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt+
−
  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt+
−
  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt+
−
  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt+
−
  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt+
−
  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt+
−
  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt+
−
  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt+
−
  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt+
−
  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt+
−
  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt+
−
  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt+
−
  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt   +
−
  * @retval None+
−
  */+
−
#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))+
−
+
−
/**+
−
  * @brief  Check whether the specified SD flag is set or not. +
−
  * @param  __HANDLE__ SD Handle   +
−
  * @param  __FLAG__ specifies the flag to check. +
−
  *          This parameter can be one of the following values:+
−
  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)+
−
  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)+
−
  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout+
−
  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout+
−
  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error+
−
  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error+
−
  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)+
−
  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)+
−
  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)+
−
  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)+
−
  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress+
−
  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress+
−
  *            @arg SDIO_FLAG_RXACT:    Data receive in progress+
−
  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty+
−
  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full+
−
  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full+
−
  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full+
−
  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty+
−
  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty+
−
  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO+
−
  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO+
−
  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received+
−
  * @retval The new state of SD FLAG (SET or RESET).+
−
  */+
−
#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))+
−
+
−
/**+
−
  * @brief  Clear the SD's pending flags.+
−
  * @param  __HANDLE__ SD Handle  +
−
  * @param  __FLAG__ specifies the flag to clear.  +
−
  *          This parameter can be one or a combination of the following values:+
−
  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)+
−
  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)+
−
  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout+
−
  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout+
−
  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error+
−
  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error+
−
  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)+
−
  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)+
−
  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)+
−
  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)+
−
  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received+
−
  * @retval None+
−
  */+
−
#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))+
−
+
−
/**+
−
  * @brief  Check whether the specified SD interrupt has occurred or not.+
−
  * @param  __HANDLE__ SD Handle   +
−
  * @param  __INTERRUPT__ specifies the SDMMC interrupt source to check. +
−
  *          This parameter can be one of the following values:+
−
  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt+
−
  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt+
−
  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt+
−
  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt+
−
  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt+
−
  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt+
−
  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt+
−
  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt+
−
  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt+
−
  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt+
−
  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt+
−
  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt+
−
  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt+
−
  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt+
−
  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt+
−
  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt+
−
  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt+
−
  * @retval The new state of SD IT (SET or RESET).+
−
  */+
−
#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))+
−
+
−
/**+
−
  * @brief  Clear the SD's interrupt pending bits.+
−
  * @param  __HANDLE__ SD Handle+
−
  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear. +
−
  *          This parameter can be one or a combination of the following values:+
−
  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt+
−
  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt+
−
  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt+
−
  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt+
−
  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt+
−
  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt+
−
  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt+
−
  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDMMC_DCOUNT, is zero) interrupt+
−
  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt+
−
  * @retval None+
−
  */+
−
#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))+
−
+
−
/**+
−
  * @}+
−
  */+
−
  +
−
/* Exported functions --------------------------------------------------------*/+
−
/** @defgroup SD_Exported_Functions SD Exported Functions+
−
  * @{+
−
  */+
−
  +
−
/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions+
−
  * @{+
−
  */+
−
HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);+
−
HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);+
−
HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);+
−
void HAL_SD_MspInit(SD_HandleTypeDef *hsd);+
−
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);+
−
/**+
−
  * @}+
−
  */+
−
  +
−
/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions+
−
  * @{+
−
  */+
−
/* Blocking mode: Polling */+
−
HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);+
−
HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);+
−
HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);+
−
/* Non-Blocking mode: IT */+
−
HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);+
−
HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);+
−
/* Non-Blocking mode: DMA */+
−
HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);+
−
HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);+
−
+
−
void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);+
−
+
−
/* Callback in non blocking modes (DMA) */+
−
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);+
−
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);+
−
void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);+
−
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);+
−
/**+
−
  * @}+
−
  */+
−
  +
−
/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions+
−
  * @{+
−
  */+
−
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Functions_Group4 SD card related functions+
−
  * @{+
−
  */+
−
HAL_StatusTypeDef       HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);+
−
HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);+
−
HAL_StatusTypeDef       HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);+
−
HAL_StatusTypeDef       HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);+
−
HAL_StatusTypeDef       HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);+
−
HAL_StatusTypeDef       HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions+
−
  * @{+
−
  */+
−
HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);+
−
uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management+
−
  * @{+
−
  */+
−
HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);+
−
HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);+
−
/**+
−
  * @}+
−
  */+
−
    +
−
/* Private types -------------------------------------------------------------*/+
−
/** @defgroup SD_Private_Types SD Private Types+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */ +
−
+
−
/* Private defines -----------------------------------------------------------*/+
−
/** @defgroup SD_Private_Defines SD Private Defines+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */ +
−
          +
−
/* Private variables ---------------------------------------------------------*/+
−
/** @defgroup SD_Private_Variables SD Private Variables+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */ +
−
+
−
/* Private constants ---------------------------------------------------------*/+
−
/** @defgroup SD_Private_Constants SD Private Constants+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */ +
−
+
−
/* Private macros ------------------------------------------------------------*/+
−
/** @defgroup SD_Private_Macros SD Private Macros+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/* Private functions prototypes ----------------------------------------------*/+
−
/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/* Private functions ---------------------------------------------------------*/+
−
/** @defgroup SD_Private_Functions SD Private Functions+
−
  * @{+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
+
−
/**+
−
  * @}+
−
  */ +
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||+
−
          STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||+
−
          STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */+
−
+
−
#ifdef __cplusplus+
−
}+
−
#endif+
−
+
−
+
−
#endif /* __STM32F4xx_HAL_SD_H */ +
−
+
−
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+
−