DevBugfix Co2 sensor details:
The CO2 sensor could not be selected to enter the details menu. This has been corrected and the enable / disable state is shown in the sensor overview.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_hal_rtc_ex.h+ − * @author MCD Application Team+ − * @brief Header file of RTC HAL Extension module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */ + − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_HAL_RTC_EX_H+ − #define __STM32F4xx_HAL_RTC_EX_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx_hal_def.h"+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup RTCEx+ − * @{+ − */ + − + − /* Exported types ------------------------------------------------------------*/ + − /** @defgroup RTCEx_Exported_Types RTCEx Exported Types+ − * @{+ − */+ − + − /** + − * @brief RTC Tamper structure definition + − */+ − typedef struct + − {+ − uint32_t Tamper; /*!< Specifies the Tamper Pin.+ − This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */+ − + − uint32_t PinSelection; /*!< Specifies the Tamper Pin.+ − This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */+ − + − uint32_t Trigger; /*!< Specifies the Tamper Trigger.+ − This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */+ − + − uint32_t Filter; /*!< Specifies the RTC Filter Tamper.+ − This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */+ − + − uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.+ − This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */+ − + − uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .+ − This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ + − + − uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .+ − This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ + − + − uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.+ − This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */+ − }RTC_TamperTypeDef;+ − /**+ − * @}+ − */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants+ − * @{+ − */ + − + − /** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions+ − * @{+ − */+ − #define RTC_BKP_DR0 0x00000000U+ − #define RTC_BKP_DR1 0x00000001U+ − #define RTC_BKP_DR2 0x00000002U+ − #define RTC_BKP_DR3 0x00000003U+ − #define RTC_BKP_DR4 0x00000004U+ − #define RTC_BKP_DR5 0x00000005U+ − #define RTC_BKP_DR6 0x00000006U+ − #define RTC_BKP_DR7 0x00000007U+ − #define RTC_BKP_DR8 0x00000008U+ − #define RTC_BKP_DR9 0x00000009U+ − #define RTC_BKP_DR10 0x0000000AU+ − #define RTC_BKP_DR11 0x0000000BU+ − #define RTC_BKP_DR12 0x0000000CU+ − #define RTC_BKP_DR13 0x0000000DU+ − #define RTC_BKP_DR14 0x0000000EU+ − #define RTC_BKP_DR15 0x0000000FU+ − #define RTC_BKP_DR16 0x00000010U+ − #define RTC_BKP_DR17 0x00000011U+ − #define RTC_BKP_DR18 0x00000012U+ − #define RTC_BKP_DR19 0x00000013U+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions+ − * @{+ − */ + − #define RTC_TIMESTAMPEDGE_RISING 0x00000000U+ − #define RTC_TIMESTAMPEDGE_FALLING 0x00000008U+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions+ − * @{+ − */+ − #define RTC_TAMPER_1 RTC_TAFCR_TAMP1E+ − + − #if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)+ − #define RTC_TAMPER_2 RTC_TAFCR_TAMP2E+ − #endif+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection+ − * @{+ − */+ − + − #define RTC_TAMPERPIN_DEFAULT 0x00000000U+ − + − #if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)+ − #define RTC_TAMPERPIN_POS1 0x00010000U+ − #endif+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection+ − * @{+ − */ + − #define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U+ − + − #if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)+ − #define RTC_TIMESTAMPPIN_POS1 0x00020000U+ − #endif+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions+ − * @{+ − */ + − #define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U+ − #define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U+ − #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE+ − #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions+ − * @{+ − */ + − #define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */+ − + − #define RTC_TAMPERFILTER_2SAMPLE 0x00000800U /*!< Tamper is activated after 2 + − consecutive samples at the active level */+ − #define RTC_TAMPERFILTER_4SAMPLE 0x00001000U /*!< Tamper is activated after 4 + − consecutive samples at the active level */+ − #define RTC_TAMPERFILTER_8SAMPLE 0x00001800U /*!< Tamper is activated after 8 + − consecutive samples at the active level. */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions+ − * @{+ − */ + − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 32768 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 0x00000100U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 16384 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 0x00000200U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 8192 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 0x00000300U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 4096 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 0x00000400U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 2048 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 0x00000500U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 1024 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 0x00000600U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 512 */+ − #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 0x00000700U /*!< Each of the tamper inputs are sampled+ − with a frequency = RTCCLK / 256 */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions+ − * @{+ − */ + − #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before + − sampling during 1 RTCCLK cycle */+ − #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U /*!< Tamper pins are pre-charged before + − sampling during 2 RTCCLK cycles */+ − #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U /*!< Tamper pins are pre-charged before + − sampling during 4 RTCCLK cycles */+ − #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U /*!< Tamper pins are pre-charged before + − sampling during 8 RTCCLK cycles */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions+ − * @{+ − */ + − #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */+ − #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions+ − * @{+ − */ + − #define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< TimeStamp on Tamper Detection event saved */+ − #define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions+ − * @{+ − */ + − #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U+ − #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U+ − #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U+ − #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U+ − #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U+ − #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions+ − * @{+ − */ + − #define RTC_CALIBSIGN_POSITIVE 0x00000000U + − #define RTC_CALIBSIGN_NEGATIVE 0x00000080U+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions+ − * @{+ − */ + − #define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibration+ − period is 32s, else 2exp20 RTCCLK seconds */+ − #define RTC_SMOOTHCALIB_PERIOD_16SEC 0x00002000U /*!< If RTCCLK = 32768 Hz, Smooth calibration + − period is 16s, else 2exp19 RTCCLK seconds */+ − #define RTC_SMOOTHCALIB_PERIOD_8SEC 0x00004000U /*!< If RTCCLK = 32768 Hz, Smooth calibration + − period is 8s, else 2exp18 RTCCLK seconds */+ − /**+ − * @}+ − */ + − + − /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions+ − * @{+ − */ + − #define RTC_SMOOTHCALIB_PLUSPULSES_SET 0x00008000U /*!< The number of RTCCLK pulses added + − during a X -second window = Y - CALM[8:0] + − with Y = 512, 256, 128 when X = 32, 16, 8 */+ − #define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited+ − during a 32-second window = CALM[8:0] */+ − /**+ − * @}+ − */+ − + − /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions+ − * @{+ − */ + − #define RTC_SHIFTADD1S_RESET 0x00000000U+ − #define RTC_SHIFTADD1S_SET 0x80000000U+ − /**+ − * @}+ − */ + − + − + − /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions+ − * @{+ − */ + − #define RTC_CALIBOUTPUT_512HZ 0x00000000U + − #define RTC_CALIBOUTPUT_1HZ 0x00080000U+ − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */ + − + − /* Exported macro ------------------------------------------------------------*/+ − /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros+ − * @{+ − */+ − + − /* ---------------------------------WAKEUPTIMER---------------------------------*/+ − /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer+ − * @{+ − */+ − + − /**+ − * @brief Enable the RTC WakeUp Timer peripheral.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))+ − + − /**+ − * @brief Disable the RTC Wake-up Timer peripheral.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))+ − + − /**+ − * @brief Enable the RTC WakeUpTimer interrupt.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. + − * This parameter can be:+ − * @arg RTC_IT_WUT: WakeUpTimer A interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))+ − + − /**+ − * @brief Disable the RTC WakeUpTimer interrupt.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. + − * This parameter can be:+ − * @arg RTC_IT_WUT: WakeUpTimer A interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))+ − + − /**+ − * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.+ − * This parameter can be:+ − * @arg RTC_IT_WUT: WakeUpTimer A interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.+ − * This parameter can be:+ − * @arg RTC_IT_WUT: WakeUpTimer interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)+ − + − /**+ − * @brief Get the selected RTC WakeUpTimer's flag status.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC WakeUpTimer Flag to check.+ − * This parameter can be:+ − * @arg RTC_FLAG_WUTF + − * @arg RTC_FLAG_WUTWF + − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Clear the RTC Wake Up timer's pending flags.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.+ − * This parameter can be:+ − * @arg RTC_FLAG_WUTF + − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + − + − /**+ − * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.+ − * @retval None+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))+ − + − /**+ − * @brief Enable event on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Disable event on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))+ − + − /**+ − * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line. + − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))+ − + − /**+ − * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))+ − + − /**+ − * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\+ − __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\+ − } while(0U) + − + − /**+ − * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.+ − * This parameter can be:+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\+ − __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\+ − } while(0U) + − + − /**+ − * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.+ − * @retval Line Status.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Clear the RTC Wake-up Timer associated Exti line flag.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)+ − + − /**+ − * @}+ − */+ ÃÆÃÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’ƒâ€šÃ‚¢Ãƒâ€¹Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ + − /* ---------------------------------TIMESTAMP---------------------------------*/+ − /** @defgroup RTCEx_Timestamp RTC Timestamp+ − * @{+ − */+ − + − /**+ − * @brief Enable the RTC TimeStamp peripheral.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))+ − + − /**+ − * @brief Disable the RTC TimeStamp peripheral.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))+ − + − /**+ − * @brief Enable the RTC TimeStamp interrupt.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled. + − * This parameter can be:+ − * @arg RTC_IT_TS: TimeStamp interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))+ − + − /**+ − * @brief Disable the RTC TimeStamp interrupt.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt sources to be enabled or disabled. + − * This parameter can be:+ − * @arg RTC_IT_TS: TimeStamp interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))+ − + − /**+ − * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.+ − * This parameter can be:+ − * @arg RTC_IT_TS: TimeStamp interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.+ − * This parameter can be:+ − * @arg RTC_IT_TS: TimeStamp interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)+ − + − /**+ − * @brief Get the selected RTC TimeStamp's flag status.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC TimeStamp flag to check.+ − * This parameter can be:+ − * @arg RTC_FLAG_TSF + − * @arg RTC_FLAG_TSOVF + − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Clear the RTC Time Stamp's pending flags.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC Alarm Flag sources to be enabled or disabled.+ − * This parameter can be:+ − * @arg RTC_FLAG_TSF + − * @retval None+ − */+ − #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))+ − + − /**+ − * @}+ − */+ − + − /* ---------------------------------TAMPER------------------------------------*/+ − /** @defgroup RTCEx_Tamper RTC Tamper+ − * @{+ − */+ − + − /**+ − * @brief Enable the RTC Tamper1 input detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))+ − + − /**+ − * @brief Disable the RTC Tamper1 input detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))+ − + − #if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx)+ − /**+ − * @brief Enable the RTC Tamper2 input detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))+ − + − /**+ − * @brief Disable the RTC Tamper2 input detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))+ − #endif+ − + − /**+ − * @brief Check whether the specified RTC Tamper interrupt has occurred or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.+ − * This parameter can be:+ − * @arg RTC_IT_TAMP1+ − * @arg RTC_IT_TAMP2+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.+ − * This parameter can be:+ − * @arg RTC_IT_TAMP: Tamper interrupt+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)+ − + − /**+ − * @brief Get the selected RTC Tamper's flag status.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC Tamper Flag sources to be enabled or disabled.+ − * This parameter can be:+ − * @arg RTC_FLAG_TAMP1F + − * @arg RTC_FLAG_TAMP2F + − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)+ − + − /**+ − * @brief Clear the RTC Tamper's pending flags.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC Tamper Flag to clear.+ − * This parameter can be:+ − * @arg RTC_FLAG_TAMP1F+ − * @arg RTC_FLAG_TAMP2F + − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))+ − /**+ − * @}+ − */+ − + − /* --------------------------TAMPER/TIMESTAMP---------------------------------*/+ − /** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI+ − * @{+ − */+ − + − /**+ − * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))+ − + − /**+ − * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))+ − + − /**+ − * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. + − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))+ − + − /**+ − * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))+ − + − /**+ − * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\+ − __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \+ − } while(0U) + − + − /**+ − * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.+ − * This parameter can be:+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\+ − __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\+ − } while(0U) + − + − /**+ − * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.+ − * @retval Line Status.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − + − /**+ − * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line+ − * @retval None.+ − */+ − #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)+ − /**+ − * @}+ − */+ − + − /* ------------------------------Calibration----------------------------------*/+ − /** @defgroup RTCEx_Calibration RTC Calibration+ − * @{+ − */+ − + − /**+ − * @brief Enable the Coarse calibration process.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))+ − + − /**+ − * @brief Disable the Coarse calibration process.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))+ − + − /**+ − * @brief Enable the RTC calibration output.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))+ − + − /**+ − * @brief Disable the calibration output.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))+ − + − /**+ − * @brief Enable the clock reference detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))+ − + − /**+ − * @brief Disable the clock reference detection.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @retval None+ − */+ − #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))+ − + − /**+ − * @brief Get the selected RTC shift operation's flag status.+ − * @param __HANDLE__ specifies the RTC handle.+ − * @param __FLAG__ specifies the RTC shift operation Flag is pending or not.+ − * This parameter can be:+ − * @arg RTC_FLAG_SHPF + − * @retval None+ − */+ − #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Exported functions --------------------------------------------------------*/+ − /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions+ − * @{+ − */+ − + − /** @addtogroup RTCEx_Exported_Functions_Group1+ − * @{+ − */+ − /* RTC TimeStamp and Tamper functions *****************************************/+ − HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);+ − HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);+ − HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);+ − + − HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);+ − HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);+ − HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);+ − void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);+ − + − void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);+ − void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);+ − void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);+ − /**+ − * @}+ − */+ − + − /** @addtogroup RTCEx_Exported_Functions_Group2+ − * @{+ − */+ − /* RTC Wake-up functions ******************************************************/+ − HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);+ − HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);+ − uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);+ − uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);+ − void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);+ − void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);+ − /**+ − * @}+ − */+ − + − /** @addtogroup RTCEx_Exported_Functions_Group3+ − * @{+ − */+ − /* Extension Control functions ************************************************/+ − void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);+ − uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);+ − + − HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);+ − HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);+ − HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);+ − HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);+ − HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);+ − HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);+ − /**+ − * @}+ − */+ − + − /** @addtogroup RTCEx_Exported_Functions_Group4+ − * @{+ − */+ − /* Extension RTC features functions *******************************************/+ − void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); + − HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Private types -------------------------------------------------------------*/+ − /* Private variables ---------------------------------------------------------*/+ − /* Private constants ---------------------------------------------------------*/+ − /** @defgroup RTCEx_Private_Constants RTCEx Private Constants+ − * @{+ − */+ − #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */+ − #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */+ − /**+ − * @}+ − */+ − + − /* Private macros ------------------------------------------------------------*/+ − /** @defgroup RTCEx_Private_Macros RTCEx Private Macros+ − * @{+ − */+ − + − /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters+ − * @{+ − */ + − #define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \+ − ((BKP) == RTC_BKP_DR1) || \+ − ((BKP) == RTC_BKP_DR2) || \+ − ((BKP) == RTC_BKP_DR3) || \+ − ((BKP) == RTC_BKP_DR4) || \+ − ((BKP) == RTC_BKP_DR5) || \+ − ((BKP) == RTC_BKP_DR6) || \+ − ((BKP) == RTC_BKP_DR7) || \+ − ((BKP) == RTC_BKP_DR8) || \+ − ((BKP) == RTC_BKP_DR9) || \+ − ((BKP) == RTC_BKP_DR10) || \+ − ((BKP) == RTC_BKP_DR11) || \+ − ((BKP) == RTC_BKP_DR12) || \+ − ((BKP) == RTC_BKP_DR13) || \+ − ((BKP) == RTC_BKP_DR14) || \+ − ((BKP) == RTC_BKP_DR15) || \+ − ((BKP) == RTC_BKP_DR16) || \+ − ((BKP) == RTC_BKP_DR17) || \+ − ((BKP) == RTC_BKP_DR18) || \+ − ((BKP) == RTC_BKP_DR19))+ − #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \+ − ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))+ − + − #if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E ))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))+ − #else+ − #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))+ − #endif+ − + − #if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT)+ − #else+ − #define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \+ − ((PIN) == RTC_TAMPERPIN_POS1))+ − #endif + − + − #if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT)+ − #else+ − #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \+ − ((PIN) == RTC_TIMESTAMPPIN_POS1))+ − #endif+ − #define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \+ − ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \+ − ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \+ − ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + − #define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \+ − ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \+ − ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \+ − ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))+ − #define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \+ − ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))+ − #define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \+ − ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \+ − ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \+ − ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))+ − #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \+ − ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))+ − #define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \+ − ((STATE) == RTC_TAMPER_PULLUP_DISABLE))+ − #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \+ − ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \+ − ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \+ − ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \+ − ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \+ ÃÂÃâÃ¢â€šÂ¬Ã…¡Ãƒâ€šÃ‚¢ÃƒÆ’ƒâ€¹Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))+ − + − #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)+ − #define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \+ − ((SIGN) == RTC_CALIBSIGN_NEGATIVE))+ − + − #define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U)+ − + − #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \+ − ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \+ − ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + − #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \+ − ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))+ − + − #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)+ − #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \+ − ((SEL) == RTC_SHIFTADD1S_SET)) + − #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)+ − #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \+ − ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */ + − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /* __STM32F4xx_HAL_RTC_EX_H */+ − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
