DevBugfix Co2 sensor details:
The CO2 sensor could not be selected to enter the details menu. This has been corrected and the enable / disable state is shown in the sensor overview.
line source
/**+ −
******************************************************************************+ −
* @file stm32f4xx_hal_lptim.h+ −
* @author MCD Application Team+ −
* @brief Header file of LPTIM HAL module.+ −
******************************************************************************+ −
* @attention+ −
*+ −
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ −
*+ −
* Redistribution and use in source and binary forms, with or without modification,+ −
* are permitted provided that the following conditions are met:+ −
* 1. Redistributions of source code must retain the above copyright notice,+ −
* this list of conditions and the following disclaimer.+ −
* 2. Redistributions in binary form must reproduce the above copyright notice,+ −
* this list of conditions and the following disclaimer in the documentation+ −
* and/or other materials provided with the distribution.+ −
* 3. Neither the name of STMicroelectronics nor the names of its contributors+ −
* may be used to endorse or promote products derived from this software+ −
* without specific prior written permission.+ −
*+ −
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ −
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ −
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ −
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ −
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ −
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ −
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ −
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ −
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ −
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ −
*+ −
******************************************************************************+ −
*/ + −
+ −
/* Define to prevent recursive inclusion -------------------------------------*/+ −
#ifndef __STM32F4xx_HAL_LPTIM_H+ −
#define __STM32F4xx_HAL_LPTIM_H+ −
+ −
#ifdef __cplusplus+ −
extern "C" {+ −
#endif+ −
+ −
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)+ −
/* Includes ------------------------------------------------------------------*/+ −
#include "stm32f4xx_hal_def.h"+ −
+ −
/** @addtogroup STM32F4xx_HAL_Driver+ −
* @{+ −
*/+ −
+ −
/** @defgroup LPTIM LPTIM+ −
* @brief LPTIM HAL module driver+ −
* @{+ −
*/+ −
+ −
/* Exported types ------------------------------------------------------------*/+ −
/** @defgroup LPTIM_Exported_Types LPTIM Exported Types+ −
* @{+ −
*/+ −
+ −
/** @defgroup LPTIM_WAKEUPTIMER_EXTILINE LPTIM WAKEUP Timer EXTI Line+ −
* @{+ −
*/+ −
#define LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR23) /*!< External interrupt line 23 Connected to the LPTIM EXTI Line */+ −
/**+ −
* @}+ −
*/+ −
+ −
/** + −
* @brief LPTIM Clock configuration definition + −
*/+ −
typedef struct+ −
{+ −
uint32_t Source; /*!< Selects the clock source.+ −
This parameter can be a value of @ref LPTIM_Clock_Source */+ −
+ −
uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.+ −
This parameter can be a value of @ref LPTIM_Clock_Prescaler */+ −
+ −
}LPTIM_ClockConfigTypeDef;+ −
+ −
/** + −
* @brief LPTIM Clock configuration definition + −
*/+ −
typedef struct+ −
{+ −
uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit+ −
if the ULPTIM input is selected.+ −
Note: This parameter is used only when Ultra low power clock source is used.+ −
Note: If the polarity is configured on 'both edges', an auxiliary clock+ −
(one of the Low power oscillator) must be active.+ −
This parameter can be a value of @ref LPTIM_Clock_Polarity */ + −
+ −
uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.+ −
Note: This parameter is used only when Ultra low power clock source is used.+ −
This parameter can be a value of @ref LPTIM_Clock_Sample_Time */ + −
+ −
}LPTIM_ULPClockConfigTypeDef;+ −
+ −
/** + −
* @brief LPTIM Trigger configuration definition + −
*/+ −
typedef struct+ −
{+ −
uint32_t Source; /*!< Selects the Trigger source.+ −
This parameter can be a value of @ref LPTIM_Trigger_Source */+ −
+ −
uint32_t ActiveEdge; /*!< Selects the Trigger active edge.+ −
Note: This parameter is used only when an external trigger is used.+ −
This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */+ −
+ −
uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.+ −
Note: This parameter is used only when an external trigger is used.+ −
This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */ + −
}LPTIM_TriggerConfigTypeDef;+ −
+ −
/** + −
* @brief LPTIM Initialization Structure definition + −
*/+ −
typedef struct+ −
{ + −
LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */+ −
+ −
LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */+ −
+ −
LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */+ −
+ −
uint32_t OutputPolarity; /*!< Specifies the Output polarity.+ −
This parameter can be a value of @ref LPTIM_Output_Polarity */+ −
+ −
uint32_t UpdateMode; /*!< Specifies whether the update of the autorelaod and the compare+ −
values is done immediately or after the end of current period.+ −
This parameter can be a value of @ref LPTIM_Updating_Mode */+ −
+ −
uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event+ −
or each external event.+ −
This parameter can be a value of @ref LPTIM_Counter_Source */ + −
+ −
}LPTIM_InitTypeDef;+ −
+ −
/** + −
* @brief HAL LPTIM State structure definition + −
*/ + −
typedef enum __HAL_LPTIM_StateTypeDef+ −
{+ −
HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */+ −
HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */+ −
HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */+ −
HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */+ −
HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */+ −
}HAL_LPTIM_StateTypeDef;+ −
+ −
/** + −
* @brief LPTIM handle Structure definition + −
*/ + −
typedef struct+ −
{+ −
LPTIM_TypeDef *Instance; /*!< Register base address */+ −
+ −
LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */+ −
+ −
HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */+ −
+ −
HAL_LockTypeDef Lock; /*!< LPTIM locking object */+ −
+ −
__IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */+ −
+ −
}LPTIM_HandleTypeDef;+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/* Exported constants --------------------------------------------------------*/+ −
/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants+ −
* @{+ −
*/+ −
+ −
/** @defgroup LPTIM_Clock_Source LPTIM Clock Source+ −
* @{+ −
*/+ −
#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC 0x00U+ −
#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler+ −
* @{+ −
*/+ −
#define LPTIM_PRESCALER_DIV1 0x00000000U+ −
#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0+ −
#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1+ −
#define LPTIM_PRESCALER_DIV8 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))+ −
#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2+ −
#define LPTIM_PRESCALER_DIV32 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))+ −
#define LPTIM_PRESCALER_DIV64 ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))+ −
#define LPTIM_PRESCALER_DIV128 ((uint32_t)LPTIM_CFGR_PRESC)+ −
/**+ −
* @}+ −
*/ + −
+ −
/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity+ −
* @{+ −
*/+ −
+ −
#define LPTIM_OUTPUTPOLARITY_HIGH 0x00000000U+ −
#define LPTIM_OUTPUTPOLARITY_LOW (LPTIM_CFGR_WAVPOL)+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time+ −
* @{+ −
*/+ −
#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION 0x00000000U+ −
#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0+ −
#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1+ −
#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity+ −
* @{+ −
*/+ −
+ −
#define LPTIM_CLOCKPOLARITY_RISING 0x00000000U+ −
#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0+ −
#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source+ −
* @{+ −
*/+ −
#define LPTIM_TRIGSOURCE_SOFTWARE 0x0000FFFFU+ −
#define LPTIM_TRIGSOURCE_0 0x00000000U+ −
#define LPTIM_TRIGSOURCE_1 ((uint32_t)LPTIM_CFGR_TRIGSEL_0)+ −
#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1+ −
#define LPTIM_TRIGSOURCE_3 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)+ −
#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2+ −
#define LPTIM_TRIGSOURCE_5 ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity+ −
* @{+ −
*/+ −
#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0+ −
#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1+ −
#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time+ −
* @{+ −
*/+ −
#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION 0x00000000U+ −
#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0+ −
#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1+ −
#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode+ −
* @{+ −
*/+ −
+ −
#define LPTIM_UPDATE_IMMEDIATE 0x00000000U+ −
#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Counter_Source LPTIM Counter Source+ −
* @{+ −
*/+ −
+ −
#define LPTIM_COUNTERSOURCE_INTERNAL 0x00000000U+ −
#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Flag_Definition LPTIM Flag Definition+ −
* @{+ −
*/+ −
+ −
#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN+ −
#define LPTIM_FLAG_UP LPTIM_ISR_UP+ −
#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK+ −
#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK+ −
#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG+ −
#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM+ −
#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition+ −
* @{+ −
*/+ −
+ −
#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE+ −
#define LPTIM_IT_UP LPTIM_IER_UPIE+ −
#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE+ −
#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE+ −
#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE+ −
#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE+ −
#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE+ −
/**+ −
* @}+ −
*/+ −
+ −
/** @defgroup LPTIM_Option Register Definition+ −
* @{+ −
*/+ −
#define LPTIM_OP_PAD_AF 0x00000000U+ −
#define LPTIM_OP_PAD_PA4 LPTIM_OR_LPT_IN1_RMP_0+ −
#define LPTIM_OP_PAD_PB9 LPTIM_OR_LPT_IN1_RMP_1+ −
#define LPTIM_OP_TIM_DAC LPTIM_OR_LPT_IN1_RMP+ −
+ −
/**+ −
* @}+ −
*/+ −
+ −
/**+ −
* @}+ −
*/+ −
+ −
/* Exported macro ------------------------------------------------------------*/+ −
/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros+ −
* @{+ −
*/+ −
+ −
/** @brief Reset LPTIM handle state+ −
* @param __HANDLE__ LPTIM handle+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)+ −
+ −
/**+ −
* @brief Enable/Disable the LPTIM peripheral.+ −
* @param __HANDLE__ LPTIM handle+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))+ −
#define __HAL_LPTIM_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE))+ −
+ −
/**+ −
* @brief Starts the LPTIM peripheral in Continuous or in single mode.+ −
* @param __HANDLE__ DMA handle+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)+ −
#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)+ −
+ −
+ −
/**+ −
* @brief Writes the passed parameter in the Autoreload register.+ −
* @param __HANDLE__ LPTIM handle+ −
* @param __VALUE__ Autoreload value+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))+ −
+ −
/**+ −
* @brief Writes the passed parameter in the Compare register.+ −
* @param __HANDLE__ LPTIM handle+ −
* @param __VALUE__ Compare value+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))+ −
+ −
/**+ −
* @brief Checks whether the specified LPTIM flag is set or not.+ −
* @param __HANDLE__ LPTIM handle+ −
* @param __FLAG__ LPTIM flag to check+ −
* This parameter can be a value of:+ −
* @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.+ −
* @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.+ −
* @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.+ −
* @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.+ −
* @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.+ −
* @arg LPTIM_FLAG_ARRM : Autoreload match Flag.+ −
* @arg LPTIM_FLAG_CMPM : Compare match Flag.+ −
* @retval The state of the specified flag (SET or RESET).+ −
*/+ −
#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))+ −
+ −
/**+ −
* @brief Clears the specified LPTIM flag.+ −
* @param __HANDLE__ LPTIM handle.+ −
* @param __FLAG__ LPTIM flag to clear.+ −
* This parameter can be a value of:+ −
* @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.+ −
* @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.+ −
* @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.+ −
* @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.+ −
* @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.+ −
* @arg LPTIM_FLAG_ARRM : Autoreload match Flag.+ −
* @arg LPTIM_FLAG_CMPM : Compare match Flag.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))+ −
+ −
/**+ −
* @brief Enable the specified LPTIM interrupt.+ −
* @param __HANDLE__ LPTIM handle.+ −
* @param __INTERRUPT__ LPTIM interrupt to set.+ −
* This parameter can be a value of:+ −
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.+ −
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.+ −
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.+ −
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.+ −
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.+ −
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.+ −
* @arg LPTIM_IT_CMPM : Compare match Interrupt.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))+ −
+ −
/**+ −
* @brief Disable the specified LPTIM interrupt.+ −
* @param __HANDLE__ LPTIM handle.+ −
* @param __INTERRUPT__ LPTIM interrupt to set.+ −
* This parameter can be a value of:+ −
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.+ −
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.+ −
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.+ −
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.+ −
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.+ −
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.+ −
* @arg LPTIM_IT_CMPM : Compare match Interrupt.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))+ −
+ −
/**+ −
* @brief Checks whether the specified LPTIM interrupt is set or not.+ −
* @param __HANDLE__ LPTIM handle.+ −
* @param __INTERRUPT__ LPTIM interrupt to check.+ −
* This parameter can be a value of:+ −
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.+ −
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.+ −
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.+ −
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.+ −
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.+ −
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.+ −
* @arg LPTIM_IT_CMPM : Compare match Interrupt.+ −
* @retval Interrupt status.+ −
*/+ −
+ −
#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)+ −
+ −
/** @brief LPTIM Option Register + −
* @param __HANDLE__ LPTIM handle+ −
* @param __VALUE__ This parameter can be a value of :+ −
* @arg LPTIM_OP_PAD_AF + −
* @arg LPTIM_OP_PAD_PA4 + −
* @arg LPTIM_OP_PAD_PB9 + −
* @arg LPTIM_OP_TIM_DAC + −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_OPTR_CONFIG(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->OR = (__VALUE__))+ −
+ −
/**+ −
* @brief Enable interrupt on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Disable interrupt on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))+ −
+ −
/**+ −
* @brief Enable event on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Disable event on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))+ −
+ −
/**+ −
* @brief Enable falling edge trigger on the LPTIM Wake-up Timer associated Exti line. + −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Disable falling edge trigger on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))+ −
+ −
/**+ −
* @brief Enable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Disable rising edge trigger on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))+ −
+ −
/**+ −
* @brief Enable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\+ −
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\+ −
}while(0U)+ −
+ −
/**+ −
* @brief Disable rising & falling edge trigger on the LPTIM Wake-up Timer associated Exti line.+ −
* This parameter can be:+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\+ −
__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\+ −
}while(0U)+ −
+ −
/**+ −
* @brief Check whether the LPTIM Wake-up Timer associated Exti line interrupt flag is set or not.+ −
* @retval Line Status.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Clear the LPTIM Wake-up Timer associated Exti line flag.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @brief Generate a Software interrupt on the LPTIM Wake-up Timer associated Exti line.+ −
* @retval None.+ −
*/+ −
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)+ −
+ −
/**+ −
* @}+ −
*/ + −
/* Exported functions --------------------------------------------------------*/+ −
/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions+ −
* @{+ −
*/+ −
+ −
/* Initialization/de-initialization functions ********************************/+ −
HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);+ −
HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* MSP functions *************************************************************/+ −
void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* Start/Stop operation functions *********************************************/+ −
/* ################################# PWM Mode ################################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* ############################# One Pulse Mode ##############################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* ############################## Set once Mode ##############################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);+ −
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* ############################### Encoder Mode ##############################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);+ −
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);+ −
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* ############################# Time out Mode ##############################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);+ −
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);+ −
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* ############################## Counter Mode ###############################*/+ −
/* Blocking mode: Polling */+ −
HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);+ −
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);+ −
/* Non-Blocking mode: Interrupt */+ −
HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);+ −
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* Reading operation functions ************************************************/+ −
uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);+ −
uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);+ −
uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* LPTIM IRQ functions *******************************************************/+ −
void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* CallBack functions ********************************************************/+ −
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);+ −
void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/* Peripheral State functions ************************************************/+ −
HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);+ −
+ −
/**+ −
* @}+ −
*/+ −
+ −
/* Private types -------------------------------------------------------------*/+ −
/** @defgroup LPTIM_Private_Types LPTIM Private Types+ −
* @{+ −
*/+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/* Private variables ---------------------------------------------------------*/+ −
/** @defgroup LPTIM_Private_Variables LPTIM Private Variables+ −
* @{+ −
*/+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/* Private constants ---------------------------------------------------------*/+ −
/** @defgroup LPTIM_Private_Constants LPTIM Private Constants+ −
* @{+ −
*/+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/* Private macros ------------------------------------------------------------*/+ −
/** @defgroup LPTIM_Private_Macros LPTIM Private Macros+ −
* @{+ −
*/+ −
+ −
#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \+ −
((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))+ −
+ −
#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \+ −
((__PRESCALER__) == LPTIM_PRESCALER_DIV128))+ −
#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)+ −
+ −
#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \+ −
((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))+ −
+ −
#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \+ −
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \+ −
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \+ −
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))+ −
+ −
#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \+ −
((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \+ −
((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))+ −
+ −
#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_0) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_1) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_2) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_3) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_4) || \+ −
((__TRIG__) == LPTIM_TRIGSOURCE_5))+ −
+ −
#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__) (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING ) || \+ −
((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING ) || \+ −
((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))+ −
+ −
#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \+ −
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \+ −
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \+ −
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))+ −
+ −
#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \+ −
((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))+ −
+ −
#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \+ −
((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))+ −
+ −
#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFFU)+ −
+ −
#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFU)+ −
+ −
#define IS_LPTIM_PERIOD(PERIOD) ((PERIOD) <= 0x0000FFFFU)+ −
+ −
#define IS_LPTIM_PULSE(PULSE) ((PULSE) <= 0x0000FFFFU)+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/* Private functions ---------------------------------------------------------*/+ −
/** @defgroup LPTIM_Private_Functions LPTIM Private Functions+ −
* @{+ −
*/+ −
+ −
/**+ −
* @}+ −
*/+ −
+ −
/**+ −
* @}+ −
*/ + −
+ −
/**+ −
* @}+ −
*/+ −
+ −
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */+ −
#ifdef __cplusplus+ −
}+ −
#endif+ −
+ −
#endif /* __STM32F4xx_HAL_LPTIM_H */+ −
+ −
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −