DevBugfix Co2 sensor details:
The CO2 sensor could not be selected to enter the details menu. This has been corrected and the enable / disable state is shown in the sensor overview.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_hal_dma2d.h+ − * @author MCD Application Team+ − * @brief Header file of DMA2D HAL module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */+ − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_HAL_DMA2D_H+ − #define __STM32F4xx_HAL_DMA2D_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\+ − defined(STM32F469xx) || defined(STM32F479xx)+ − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx_hal_def.h"+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup DMA2D DMA2D+ − * @brief DMA2D HAL module driver+ − * @{+ − */+ − + − /* Exported types ------------------------------------------------------------*/+ − /** @defgroup DMA2D_Exported_Types DMA2D Exported Types+ − * @{+ − */+ − #define MAX_DMA2D_LAYER 2U+ − + − /** + − * @brief DMA2D color Structure definition+ − */+ − typedef struct+ − {+ − uint32_t Blue; /*!< Configures the blue value.+ − This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */+ − + − uint32_t Green; /*!< Configures the green value.+ − This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */+ − + − uint32_t Red; /*!< Configures the red value.+ − This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */+ − } DMA2D_ColorTypeDef;+ − + − /** + − * @brief DMA2D CLUT Structure definition+ − */+ − typedef struct+ − {+ − uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/+ − + − uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode.+ − This parameter can be one value of @ref DMA2D_CLUT_CM. */+ − + − uint32_t Size; /*!< Configures the DMA2D CLUT size.+ − This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/+ − } DMA2D_CLUTCfgTypeDef;+ − + − /** + − * @brief DMA2D Init structure definition+ − */+ − typedef struct+ − {+ − uint32_t Mode; /*!< Configures the DMA2D transfer mode.+ − This parameter can be one value of @ref DMA2D_Mode. */+ − + − uint32_t ColorMode; /*!< Configures the color format of the output image.+ − This parameter can be one value of @ref DMA2D_Output_Color_Mode. */+ − + − uint32_t OutputOffset; /*!< Specifies the Offset value.+ − This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */+ − + − } DMA2D_InitTypeDef;+ − + − /** + − * @brief DMA2D Layer structure definition+ − */+ − typedef struct+ − {+ − uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset.+ − This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */+ − + − uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode. + − This parameter can be one value of @ref DMA2D_Input_Color_Mode. */+ − + − uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode.+ − This parameter can be one value of @ref DMA2D_Alpha_Mode. */+ − + − uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value in case of A8 or A4 color mode.+ − This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF except for the color modes detailed below.+ − @note In case of A8 or A4 color mode (ARGB), this parameter must be a number between + − Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where+ − - InputAlpha[24:31] is the alpha value ALPHA[0:7]+ − - InputAlpha[16:23] is the red value RED[0:7]+ − - InputAlpha[8:15] is the green value GREEN[0:7]+ − - InputAlpha[0:7] is the blue value BLUE[0:7]. */+ − + − } DMA2D_LayerCfgTypeDef;+ − + − /** + − * @brief HAL DMA2D State structures definition+ − */+ − typedef enum+ − {+ − HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */+ − HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */+ − HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */+ − HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */+ − HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */+ − HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */+ − }HAL_DMA2D_StateTypeDef;+ − + − /**+ − * @brief DMA2D handle Structure definition+ − */+ − typedef struct __DMA2D_HandleTypeDef+ − {+ − DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */+ − + − DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */+ − + − void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback. */+ − + − void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback. */+ − + − DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */+ − + − HAL_LockTypeDef Lock; /*!< DMA2D lock. */+ − + − __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */+ − + − __IO uint32_t ErrorCode; /*!< DMA2D error code. */+ − } DMA2D_HandleTypeDef;+ − /**+ − * @}+ − */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants+ − * @{+ − */+ − + − /** @defgroup DMA2D_Error_Code DMA2D Error Code+ − * @{+ − */+ − #define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */+ − #define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */+ − #define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */+ − #define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */+ − #define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Mode DMA2D Mode + − * @{+ − */+ − #define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */+ − #define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */+ − #define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */+ − #define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode + − * @{+ − */+ − #define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */+ − #define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */+ − #define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */+ − #define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */+ − #define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode+ − * @{+ − */+ − #define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */+ − #define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */+ − #define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */+ − #define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */+ − #define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */+ − #define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */+ − #define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */+ − #define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */+ − #define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */+ − #define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */+ − #define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode+ − * @{+ − */+ − #define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */+ − #define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */+ − #define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value+ − with original alpha channel value */+ − /**+ − * @}+ − */ + − + − /** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode+ − * @{+ − */+ − #define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */+ − #define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Interrupts DMA2D Interrupts+ − * @{+ − */+ − #define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */+ − #define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */+ − #define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */+ − #define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */+ − #define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */+ − #define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Flags DMA2D Flags+ − * @{+ − */+ − #define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */+ − #define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */+ − #define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */+ − #define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */+ − #define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */+ − #define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Aliases DMA2D API Aliases+ − * @{+ − */+ − #define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort for compatibility with legacy code */+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − /* Exported macros ------------------------------------------------------------*/+ − /** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros+ − * @{+ − */+ − + − /** @brief Reset DMA2D handle state+ − * @param __HANDLE__ specifies the DMA2D handle.+ − * @retval None+ − */+ − #define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)+ − + − /**+ − * @brief Enable the DMA2D.+ − * @param __HANDLE__ DMA2D handle+ − * @retval None.+ − */+ − #define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)+ − + − /* Interrupt & Flag management */+ − /**+ − * @brief Get the DMA2D pending flags.+ − * @param __HANDLE__ DMA2D handle+ − * @param __FLAG__ flag to check.+ − * This parameter can be any combination of the following values:+ − * @arg DMA2D_FLAG_CE: Configuration error flag+ − * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag+ − * @arg DMA2D_FLAG_CAE: CLUT access error flag+ − * @arg DMA2D_FLAG_TW: Transfer Watermark flag+ − * @arg DMA2D_FLAG_TC: Transfer complete flag+ − * @arg DMA2D_FLAG_TE: Transfer error flag + − * @retval The state of FLAG.+ − */+ − #define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))+ − + − /**+ − * @brief Clear the DMA2D pending flags.+ − * @param __HANDLE__ DMA2D handle+ − * @param __FLAG__ specifies the flag to clear.+ − * This parameter can be any combination of the following values:+ − * @arg DMA2D_FLAG_CE: Configuration error flag+ − * @arg DMA2D_FLAG_CTC: CLUT transfer complete flag+ − * @arg DMA2D_FLAG_CAE: CLUT access error flag+ − * @arg DMA2D_FLAG_TW: Transfer Watermark flag+ − * @arg DMA2D_FLAG_TC: Transfer complete flag+ − * @arg DMA2D_FLAG_TE: Transfer error flag+ − * @retval None+ − */+ − #define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))+ − + − /**+ − * @brief Enable the specified DMA2D interrupts.+ − * @param __HANDLE__ DMA2D handle+ − * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.+ − * This parameter can be any combination of the following values:+ − * @arg DMA2D_IT_CE: Configuration error interrupt mask+ − * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask+ − * @arg DMA2D_IT_CAE: CLUT access error interrupt mask+ − * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask+ − * @arg DMA2D_IT_TC: Transfer complete interrupt mask+ − * @arg DMA2D_IT_TE: Transfer error interrupt mask+ − * @retval None+ − */+ − #define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))+ − + − /**+ − * @brief Disable the specified DMA2D interrupts.+ − * @param __HANDLE__ DMA2D handle+ − * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.+ − * This parameter can be any combination of the following values:+ − * @arg DMA2D_IT_CE: Configuration error interrupt mask+ − * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask+ − * @arg DMA2D_IT_CAE: CLUT access error interrupt mask+ − * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask+ − * @arg DMA2D_IT_TC: Transfer complete interrupt mask+ − * @arg DMA2D_IT_TE: Transfer error interrupt mask+ − * @retval None+ − */+ − #define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))+ − + − /**+ − * @brief Check whether the specified DMA2D interrupt source is enabled or not.+ − * @param __HANDLE__ DMA2D handle+ − * @param __INTERRUPT__ specifies the DMA2D interrupt source to check.+ − * This parameter can be one of the following values:+ − * @arg DMA2D_IT_CE: Configuration error interrupt mask+ − * @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask+ − * @arg DMA2D_IT_CAE: CLUT access error interrupt mask+ − * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask+ − * @arg DMA2D_IT_TC: Transfer complete interrupt mask+ − * @arg DMA2D_IT_TE: Transfer error interrupt mask+ − * @retval The state of INTERRUPT source.+ − */+ − #define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))+ − + − /**+ − * @}+ − */+ − + − /* Exported functions --------------------------------------------------------*/+ − /** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions+ − * @{+ − */+ − + − /** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions+ − * @{+ − */+ − + − /* Initialization and de-initialization functions *******************************/+ − HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);+ − void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);+ − void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions+ − * @{+ − */+ − + − /* IO operation functions *******************************************************/+ − HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);+ − HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);+ − HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);+ − HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);+ − HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);+ − void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);+ − void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);+ − void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions+ − * @{+ − */+ − + − /* Peripheral Control functions *************************************************/+ − HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);+ − HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);+ − HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);+ − HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);+ − + − /**+ − * @}+ − */+ − + − /** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions+ − * @{+ − */+ − + − /* Peripheral State functions ***************************************************/+ − HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);+ − uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /* Private constants ---------------------------------------------------------*/+ − + − /** @addtogroup DMA2D_Private_Constants DMA2D Private Constants+ − * @{+ − */+ − + − /** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark + − * @{+ − */+ − #define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Color_Value DMA2D Color Value+ − * @{+ − */+ − #define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers+ − * @{+ − */+ − #define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_Offset DMA2D Offset+ − * @{+ − */+ − #define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */+ − /**+ − * @}+ − */ + − + − /** @defgroup DMA2D_Size DMA2D Size+ − * @{+ − */+ − #define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D number of pixels per line */+ − #define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of lines */+ − /**+ − * @}+ − */+ − + − /** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size+ − * @{+ − */+ − #define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D CLUT size */+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */ + − + − /* Private macros ------------------------------------------------------------*/+ − /** @defgroup DMA2D_Private_Macros DMA2D Private Macros+ − * @{+ − */+ − #define IS_DMA2D_LAYER(LAYER) ((LAYER) <= DMA2D_MAX_LAYER)+ − #define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \+ − ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))+ − #define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || ((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \+ − ((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \+ − ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))+ − #define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE)+ − #define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)+ − #define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)+ − #define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)+ − #define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || ((INPUT_CM) == DMA2D_INPUT_RGB888) || \+ − ((INPUT_CM) == DMA2D_INPUT_RGB565) || ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \+ − ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || ((INPUT_CM) == DMA2D_INPUT_L8) || \+ − ((INPUT_CM) == DMA2D_INPUT_AL44) || ((INPUT_CM) == DMA2D_INPUT_AL88) || \+ − ((INPUT_CM) == DMA2D_INPUT_L4) || ((INPUT_CM) == DMA2D_INPUT_A8) || \+ − ((INPUT_CM) == DMA2D_INPUT_A4))+ − #define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \+ − ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \+ − ((AlphaMode) == DMA2D_COMBINE_ALPHA))+ − + − #define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))+ − #define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)+ − #define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)+ − #define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \+ − ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \+ − ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))+ − #define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \+ − ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \+ − ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))+ − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */+ − + − #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */+ − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /* __STM32F4xx_HAL_DMA2D_H */+ − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
