/**+
−
  ******************************************************************************+
−
  * @file    stm32f4xx_hal_dcmi_ex.h+
−
  * @author  MCD Application Team+
−
  * @brief   Header file of DCMI Extension HAL module.+
−
  ******************************************************************************+
−
  * @attention+
−
  *+
−
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+
−
  *+
−
  * Redistribution and use in source and binary forms, with or without modification,+
−
  * are permitted provided that the following conditions are met:+
−
  *   1. Redistributions of source code must retain the above copyright notice,+
−
  *      this list of conditions and the following disclaimer.+
−
  *   2. Redistributions in binary form must reproduce the above copyright notice,+
−
  *      this list of conditions and the following disclaimer in the documentation+
−
  *      and/or other materials provided with the distribution.+
−
  *   3. Neither the name of STMicroelectronics nor the names of its contributors+
−
  *      may be used to endorse or promote products derived from this software+
−
  *      without specific prior written permission.+
−
  *+
−
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+
−
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+
−
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+
−
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+
−
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+
−
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+
−
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+
−
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+
−
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+
−
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+
−
  *+
−
  ******************************************************************************+
−
  */ +
−
+
−
/* Define to prevent recursive inclusion -------------------------------------*/+
−
#ifndef __STM32F4xx_HAL_DCMI_EX_H+
−
#define __STM32F4xx_HAL_DCMI_EX_H+
−
+
−
#ifdef __cplusplus+
−
 extern "C" {+
−
#endif+
−
+
−
#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\+
−
    defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\+
−
    defined(STM32F479xx)+
−
+
−
/* Includes ------------------------------------------------------------------*/+
−
#include "stm32f4xx_hal_def.h"+
−
+
−
+
−
/** @addtogroup STM32F4xx_HAL_Driver+
−
  * @{+
−
  */+
−
+
−
/** @addtogroup DCMIEx+
−
  * @brief DCMI HAL module driver+
−
  * @{+
−
  */  +
−
+
−
/* Exported types ------------------------------------------------------------*/+
−
/** @defgroup DCMIEx_Exported_Types DCMI Extended Exported Types+
−
  * @{+
−
  */+
−
/** +
−
  * @brief   DCMIEx Embedded Synchronisation CODE Init structure definition+
−
  */ +
−
typedef struct+
−
{+
−
  uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */+
−
  uint8_t LineStartCode;  /*!< Specifies the code of the line start delimiter.  */+
−
  uint8_t LineEndCode;    /*!< Specifies the code of the line end delimiter.    */+
−
  uint8_t FrameEndCode;   /*!< Specifies the code of the frame end delimiter.   */+
−
}DCMI_CodesInitTypeDef;+
−
+
−
/** +
−
  * @brief   DCMI Init structure definition+
−
  */  +
−
typedef struct+
−
{+
−
  uint32_t  SynchroMode;                /*!< Specifies the Synchronization Mode: Hardware or Embedded.+
−
                                             This parameter can be a value of @ref DCMI_Synchronization_Mode   */+
−
+
−
  uint32_t  PCKPolarity;                /*!< Specifies the Pixel clock polarity: Falling or Rising.+
−
                                             This parameter can be a value of @ref DCMI_PIXCK_Polarity         */+
−
+
−
  uint32_t  VSPolarity;                 /*!< Specifies the Vertical synchronization polarity: High or Low.+
−
                                             This parameter can be a value of @ref DCMI_VSYNC_Polarity         */+
−
+
−
  uint32_t  HSPolarity;                 /*!< Specifies the Horizontal synchronization polarity: High or Low.+
−
                                             This parameter can be a value of @ref DCMI_HSYNC_Polarity         */+
−
+
−
  uint32_t  CaptureRate;                /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.+
−
                                             This parameter can be a value of @ref DCMI_Capture_Rate           */+
−
+
−
  uint32_t  ExtendedDataMode;           /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.+
−
                                             This parameter can be a value of @ref DCMI_Extended_Data_Mode     */+
−
+
−
  DCMI_CodesInitTypeDef SyncroCode;     /*!< Specifies the code of the frame start delimiter.                  */+
−
+
−
  uint32_t JPEGMode;                    /*!< Enable or Disable the JPEG mode+
−
                                             This parameter can be a value of @ref DCMI_MODE_JPEG              */+
−
#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)+
−
  uint32_t ByteSelectMode;              /*!< Specifies the data to be captured by the interface +
−
                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Mode      */+
−
+
−
  uint32_t ByteSelectStart;             /*!< Specifies if the data to be captured by the interface is even or odd+
−
                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Start     */+
−
+
−
  uint32_t LineSelectMode;              /*!< Specifies the line of data to be captured by the interface +
−
                                            This parameter can be a value of @ref DCMIEx_Line_Select_Mode      */+
−
+
−
  uint32_t LineSelectStart;             /*!< Specifies if the line of data to be captured by the interface is even or odd+
−
                                            This parameter can be a value of @ref DCMIEx_Line_Select_Start     */+
−
+
−
#endif /* STM32F446xx || STM32F469xx || STM32F479xx */+
−
}DCMI_InitTypeDef;+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/* Exported constants --------------------------------------------------------*/+
−
#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)+
−
/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants+
−
  * @{+
−
  */+
−
+
−
/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode+
−
  * @{+
−
  */+
−
#define DCMI_BSM_ALL                 0x00000000U                                 /*!< Interface captures all received data                       */+
−
#define DCMI_BSM_OTHER               ((uint32_t)DCMI_CR_BSM_0)                   /*!< Interface captures every other byte from the received data */+
−
#define DCMI_BSM_ALTERNATE_4         ((uint32_t)DCMI_CR_BSM_1)                   /*!< Interface captures one byte out of four                    */+
−
#define DCMI_BSM_ALTERNATE_2         ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four                   */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start+
−
  * @{+
−
  */ +
−
#define DCMI_OEBS_ODD               0x00000000U              /*!< Interface captures first data from the frame/line start, second one being dropped  */+
−
#define DCMI_OEBS_EVEN              ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode+
−
  * @{+
−
  */+
−
#define DCMI_LSM_ALL                 0x00000000U             /*!< Interface captures all received lines  */+
−
#define DCMI_LSM_ALTERNATE_2         ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start+
−
  * @{+
−
  */ +
−
#define DCMI_OELS_ODD               0x00000000U              /*!< Interface captures first line from the frame start, second one being dropped  */+
−
#define DCMI_OELS_EVEN              ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */+
−
+
−
/**+
−
  * @}+
−
  */+
−
  +
−
/**+
−
  * @}+
−
  */+
−
#endif /* STM32F446xx || STM32F469xx || STM32F479xx */+
−
+
−
/* Exported macro ------------------------------------------------------------*/+
−
/* Exported functions --------------------------------------------------------*/+
−
/* Private types -------------------------------------------------------------*/+
−
/* Private variables ---------------------------------------------------------*/+
−
/* Private constants ---------------------------------------------------------*/+
−
#define DCMI_POSITION_ESCR_LSC     (uint32_t)DCMI_ESCR_LSC_Pos     /*!< Required left shift to set line start delimiter */+
−
#define DCMI_POSITION_ESCR_LEC     (uint32_t)DCMI_ESCR_LEC_Pos     /*!< Required left shift to set line end delimiter   */+
−
#define DCMI_POSITION_ESCR_FEC     (uint32_t)DCMI_ESCR_FEC_Pos     /*!< Required left shift to set frame end delimiter  */+
−
+
−
/* Private macro -------------------------------------------------------------*/+
−
#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)+
−
/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros+
−
  * @{+
−
  */+
−
#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \+
−
                                       ((MODE) == DCMI_BSM_OTHER) || \+
−
                                       ((MODE) == DCMI_BSM_ALTERNATE_4) || \+
−
                                       ((MODE) == DCMI_BSM_ALTERNATE_2))+
−
+
−
#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \+
−
                                            ((POLARITY) == DCMI_OEBS_EVEN))+
−
+
−
#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \+
−
                                       ((MODE) == DCMI_LSM_ALTERNATE_2))+
−
+
−
#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \+
−
                                            ((POLARITY) == DCMI_OELS_EVEN))+
−
#endif /* STM32F446xx || STM32F469xx || STM32F479xx */+
−
/**+
−
  * @}+
−
  */+
−
+
−
/* Private functions ---------------------------------------------------------*/+
−
#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\+
−
          STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\+
−
          STM32F479xx */+
−
+
−
+
−
/**+
−
  * @}+
−
  */+
−
+
−
/**+
−
  * @}+
−
  */ +
−
+
−
#ifdef __cplusplus+
−
}+
−
#endif+
−
+
−
#endif /* __STM32F4xx_HAL_DCMI_H */+
−
+
−
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+
−