DevBugfix Co2 sensor details:
The CO2 sensor could not be selected to enter the details menu. This has been corrected and the enable / disable state is shown in the sensor overview.
line source
/**+ − ******************************************************************************+ − * @file stm32f4xx_hal_adc_ex.h+ − * @author MCD Application Team+ − * @brief Header file of ADC HAL module.+ − ******************************************************************************+ − * @attention+ − *+ − * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>+ − *+ − * Redistribution and use in source and binary forms, with or without modification,+ − * are permitted provided that the following conditions are met:+ − * 1. Redistributions of source code must retain the above copyright notice,+ − * this list of conditions and the following disclaimer.+ − * 2. Redistributions in binary form must reproduce the above copyright notice,+ − * this list of conditions and the following disclaimer in the documentation+ − * and/or other materials provided with the distribution.+ − * 3. Neither the name of STMicroelectronics nor the names of its contributors+ − * may be used to endorse or promote products derived from this software+ − * without specific prior written permission.+ − *+ − * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"+ − * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE+ − * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE+ − * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE+ − * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL+ − * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR+ − * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER+ − * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,+ − * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE+ − * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.+ − *+ − ******************************************************************************+ − */+ − + − /* Define to prevent recursive inclusion -------------------------------------*/+ − #ifndef __STM32F4xx_ADC_EX_H+ − #define __STM32F4xx_ADC_EX_H+ − + − #ifdef __cplusplus+ − extern "C" {+ − #endif+ − + − /* Includes ------------------------------------------------------------------*/+ − #include "stm32f4xx_hal_def.h"+ − + − /** @addtogroup STM32F4xx_HAL_Driver+ − * @{+ − */+ − + − /** @addtogroup ADCEx+ − * @{+ − */ + − + − /* Exported types ------------------------------------------------------------*/+ − /** @defgroup ADCEx_Exported_Types ADC Exported Types+ − * @{+ − */+ − + − /** + − * @brief ADC Configuration injected Channel structure definition+ − * @note Parameters of this structure are shared within 2 scopes:+ − * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset+ − * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,+ − * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.+ − * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.+ − * ADC state can be either:+ − * - For all parameters: ADC disabled+ − * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.+ − * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.+ − */+ − typedef struct + − {+ − uint32_t InjectedChannel; /*!< Selection of ADC channel to configure+ − This parameter can be a value of @ref ADC_channels+ − Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */+ − uint32_t InjectedRank; /*!< Rank in the injected group sequencer+ − This parameter must be a value of @ref ADCEx_injected_rank+ − Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */+ − uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.+ − Unit: ADC clock cycles+ − Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).+ − This parameter can be a value of @ref ADC_sampling_times+ − Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.+ − If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.+ − Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),+ − sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)+ − Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */+ − uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).+ − Offset value must be a positive number.+ − Depending of ADC resolution selected (12, 10, 8 or 6 bits),+ − this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */+ − uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.+ − To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.+ − This parameter must be a number between Min_Data = 1 and Max_Data = 4.+ − Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + − configure a channel on injected group can impact the configuration of other channels previously set. */+ − uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).+ − Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.+ − Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.+ − This parameter can be set to ENABLE or DISABLE.+ − Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.+ − Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + − configure a channel on injected group can impact the configuration of other channels previously set. */+ − uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one+ − This parameter can be set to ENABLE or DISABLE. + − Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)+ − Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)+ − Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.+ − To maintain JAUTO always enabled, DMA must be configured in circular mode.+ − Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to+ − configure a channel on injected group can impact the configuration of other channels previously set. */+ − uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.+ − If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.+ − If set to external trigger source, triggering is on event rising edge.+ − This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected+ − Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).+ − If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)+ − Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to+ − configure a channel on injected group can impact the configuration of other channels previously set. */+ − uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.+ − This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.+ − If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.+ − Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + − configure a channel on injected group can impact the configuration of other channels previously set. */+ − }ADC_InjectionConfTypeDef; + − + − /** + − * @brief ADC Configuration multi-mode structure definition + − */ + − typedef struct+ − {+ − uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. + − This parameter can be a value of @ref ADCEx_Common_mode */+ − uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.+ − This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */+ − uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.+ − This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */+ − }ADC_MultiModeTypeDef;+ − + − /**+ − * @}+ − */+ − + − /* Exported constants --------------------------------------------------------*/+ − /** @defgroup ADCEx_Exported_Constants ADC Exported Constants+ − * @{+ − */+ − + − /** @defgroup ADCEx_Common_mode ADC Common Mode+ − * @{+ − */ + − #define ADC_MODE_INDEPENDENT 0x00000000U+ − #define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)+ − #define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)+ − #define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))+ − #define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))+ − #define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))+ − #define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))+ − #define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))+ − #define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))+ − #define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))+ − #define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))+ − #define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))+ − #define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))+ − /**+ − * @}+ − */ + − + − /** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode+ − * @{+ − */ + − #define ADC_DMAACCESSMODE_DISABLED 0x00000000U /*!< DMA mode disabled */+ − #define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/+ − #define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/+ − #define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */+ − /**+ − * @}+ − */ + − + − /** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected+ − * @{+ − */ + − #define ADC_EXTERNALTRIGINJECCONVEDGE_NONE 0x00000000U+ − #define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)+ − #define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)+ − #define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)+ − /**+ − * @}+ − */ + − + − /** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected+ − * @{+ − */ + − #define ADC_EXTERNALTRIGINJECCONV_T1_CC4 0x00000000U+ − #define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)+ − #define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)+ − #define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)+ − #define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))+ − #define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)+ − #define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))+ − #define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))+ − #define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))+ − #define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))+ − #define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)+ − #define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1U)+ − /**+ − * @}+ − */ + − + − /** @defgroup ADCEx_injected_rank ADC Injected Rank+ − * @{+ − */ + − #define ADC_INJECTED_RANK_1 0x00000001U+ − #define ADC_INJECTED_RANK_2 0x00000002U+ − #define ADC_INJECTED_RANK_3 0x00000003U+ − #define ADC_INJECTED_RANK_4 0x00000004U+ − /**+ − * @}+ − */+ − + − /** @defgroup ADCEx_channels ADC Specific Channels+ − * @{+ − */+ − #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \+ − defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \+ − defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \+ − defined(STM32F412Cx)+ − #define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)+ − #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F412Zx ||+ − STM32F412Vx || STM32F412Rx || STM32F412Cx */+ − + − #if defined(STM32F413xx) || defined(STM32F423xx)+ − #define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18)+ − #endif /* STM32F413xx || STM32F423xx */+ − + − #if defined(STM32F411xE) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \+ − defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) + − #define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT 0x10000000U /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */+ − #define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)+ − #endif /* STM32F411xE || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */+ − /**+ − * @}+ − */ + − + − + − /**+ − * @}+ − */ + − + − /* Exported macro ------------------------------------------------------------*/+ − /** @defgroup ADC_Exported_Macros ADC Exported Macros+ − * @{+ − */+ − #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)+ − /**+ − * @brief Disable internal path of ADC channel Vbat+ − * @note Use case of this macro:+ − * On devices STM32F42x and STM32F43x, ADC internal channels+ − * Vbat and VrefInt share the same internal path, only+ − * one of them can be enabled.This macro is to be used when ADC + − * channels Vbat and VrefInt are selected, and must be called + − * before starting conversion of ADC channel VrefInt in order + − * to disable ADC channel Vbat.+ − * @retval None+ − */+ − #define __HAL_ADC_PATH_INTERNAL_VBAT_DISABLE() (ADC->CCR &= ~(ADC_CCR_VBATE))+ − #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */+ − /**+ − * @}+ − */ + − + − /* Exported functions --------------------------------------------------------*/+ − /** @addtogroup ADCEx_Exported_Functions+ − * @{+ − */+ − + − /** @addtogroup ADCEx_Exported_Functions_Group1+ − * @{+ − */+ − + − /* I/O operation functions ******************************************************/+ − HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);+ − HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);+ − HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);+ − HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);+ − HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);+ − uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);+ − HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);+ − HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);+ − uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);+ − void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);+ − + − /* Peripheral Control functions *************************************************/+ − HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);+ − HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);+ − + − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */+ − /* Private types -------------------------------------------------------------*/+ − /* Private variables ---------------------------------------------------------*/+ − /* Private constants ---------------------------------------------------------*/+ − /** @defgroup ADCEx_Private_Constants ADC Private Constants+ − * @{+ − */+ − + − /**+ − * @}+ − */+ − + − /* Private macros ------------------------------------------------------------*/+ − /** @defgroup ADCEx_Private_Macros ADC Private Macros+ − * @{+ − */+ − #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \+ − defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \+ − defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || \+ − defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)+ − #define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)+ − #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||+ − STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */+ − + − #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \+ − defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)+ − #define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \+ − ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))+ − #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */+ − + − #define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \+ − ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \+ − ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \+ − ((MODE) == ADC_DUALMODE_INJECSIMULT) || \+ − ((MODE) == ADC_DUALMODE_REGSIMULT) || \+ − ((MODE) == ADC_DUALMODE_INTERL) || \+ − ((MODE) == ADC_DUALMODE_ALTERTRIG) || \+ − ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \+ − ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \+ − ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \+ − ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \+ − ((MODE) == ADC_TRIPLEMODE_INTERL) || \+ − ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))+ − #define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \+ − ((MODE) == ADC_DMAACCESSMODE_1) || \+ − ((MODE) == ADC_DMAACCESSMODE_2) || \+ − ((MODE) == ADC_DMAACCESSMODE_3))+ − #define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \+ − ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \+ − ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \+ − ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))+ − #define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \+ − ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \+ − ((INJTRIG) == ADC_INJECTED_SOFTWARE_START))+ − #define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U))+ − #define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 1U) && ((RANK) <= 4U))+ − + − /**+ − * @brief Set the selected injected Channel rank.+ − * @param _CHANNELNB_ Channel number.+ − * @param _RANKNB_ Rank number. + − * @param _JSQR_JL_ Sequence length.+ − * @retval None+ − */+ − #define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5U * (uint8_t)(((_RANKNB_) + 3U) - (_JSQR_JL_))))+ − + − /**+ − * @brief Defines if the selected ADC is within ADC common register ADC123 or ADC1+ − * if available (ADC2, ADC3 availability depends on STM32 product)+ − * @param __HANDLE__ ADC handle+ − * @retval Common control register ADC123 or ADC1+ − */+ − #if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F429xx) || defined(STM32F437xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)+ − #define ADC_COMMON_REGISTER(__HANDLE__) ADC123_COMMON+ − #else+ − #define ADC_COMMON_REGISTER(__HANDLE__) ADC1_COMMON+ − #endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx || STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */+ − /**+ − * @}+ − */+ − + − /* Private functions ---------------------------------------------------------*/+ − /** @defgroup ADCEx_Private_Functions ADC Private Functions+ − * @{+ − */+ − + − /**+ − * @}+ − */+ − + − /**+ − * @}+ − */ + − + − /**+ − * @}+ − */+ − + − #ifdef __cplusplus+ − }+ − #endif+ − + − #endif /*__STM32F4xx_ADC_EX_H */+ − + − + − /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/+ −
