Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_lptim.h @ 792:25103f5c7e29
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Add a checkbox to 'SPdeco' in the menu - this will make it obvious to users that this setpoint can be disabled. (mikeller)
author | heinrichsweikamp |
---|---|
date | Sat, 05 Aug 2023 11:52:08 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_lptim.h * @author MCD Application Team * @brief Header file of LPTIM LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_LPTIM_H #define __STM32F4xx_LL_LPTIM_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (LPTIM1) /** @defgroup LPTIM_LL LPTIM * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup LPTIM_LL_Private_Macros LPTIM Private Macros * @{ */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup LPTIM_LL_ES_INIT LPTIM Exported Init structure * @{ */ /** * @brief LPTIM Init structure definition */ typedef struct { uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance. This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE. This feature can be modified afterwards using unitary function @ref LL_LPTIM_SetClockSource().*/ uint32_t Prescaler; /*!< Specifies the prescaler division ratio. This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER. This feature can be modified afterwards using using unitary function @ref LL_LPTIM_SetPrescaler().*/ uint32_t Waveform; /*!< Specifies the waveform shape. This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM. This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/ uint32_t Polarity; /*!< Specifies waveform polarity. This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY. This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/ } LL_LPTIM_InitTypeDef; /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /* Exported constants --------------------------------------------------------*/ /** @defgroup LPTIM_LL_Exported_Constants LPTIM Exported Constants * @{ */ /** @defgroup LPTIM_LL_EC_GET_FLAG Get Flags Defines * @brief Flags defines which can be used with LL_LPTIM_ReadReg function * @{ */ #define LL_LPTIM_ISR_CMPM LPTIM_ISR_CMPM /*!< Compare match */ #define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */ #define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */ #define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */ #define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */ #define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */ #define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */ /** * @} */ /** @defgroup LPTIM_LL_EC_IT IT Defines * @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions * @{ */ #define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match Interrupt Enable */ #define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match Interrupt Enable */ #define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger valid edge Interrupt Enable */ #define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK Interrupt Enable */ #define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK Interrupt Enable */ #define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Direction change to UP Interrupt Enable */ #define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Direction change to down Interrupt Enable */ /** * @} */ /** @defgroup LPTIM_LL_EC_OPERATING_MODE Operating Mode * @{ */ #define LL_LPTIM_OPERATING_MODE_CONTINUOUS LPTIM_CR_CNTSTRT /*!<LP Timer starts in continuous mode*/ #define LL_LPTIM_OPERATING_MODE_ONESHOT LPTIM_CR_SNGSTRT /*!<LP Tilmer starts in single mode*/ /** * @} */ /** @defgroup LPTIM_LL_EC_UPDATE_MODE Update Mode * @{ */ #define LL_LPTIM_UPDATE_MODE_IMMEDIATE 0x00000000U /*!<Preload is disabled: registers are updated after each APB bus write access*/ #define LL_LPTIM_UPDATE_MODE_ENDOFPERIOD LPTIM_CFGR_PRELOAD /*!<preload is enabled: registers are updated at the end of the current LPTIM period*/ /** * @} */ /** @defgroup LPTIM_LL_EC_COUNTER_MODE Counter Mode * @{ */ #define LL_LPTIM_COUNTER_MODE_INTERNAL 0x00000000U /*!<The counter is incremented following each internal clock pulse*/ #define LL_LPTIM_COUNTER_MODE_EXTERNAL LPTIM_CFGR_COUNTMODE /*!<The counter is incremented following each valid clock pulse on the LPTIM external Input1*/ /** * @} */ /** @defgroup LPTIM_LL_EC_OUTPUT_WAVEFORM Output Waveform Type * @{ */ #define LL_LPTIM_OUTPUT_WAVEFORM_PWM 0x00000000U /*!<LPTIM generates either a PWM waveform or a One pulse waveform depending on chosen operating mode CONTINOUS or SINGLE*/ #define LL_LPTIM_OUTPUT_WAVEFORM_SETONCE LPTIM_CFGR_WAVE /*!<LPTIM generates a Set Once waveform*/ /** * @} */ /** @defgroup LPTIM_LL_EC_OUTPUT_POLARITY Output Polarity * @{ */ #define LL_LPTIM_OUTPUT_POLARITY_REGULAR 0x00000000U /*!<The LPTIM output reflects the compare results between LPTIMx_ARR and LPTIMx_CMP registers*/ #define LL_LPTIM_OUTPUT_POLARITY_INVERSE LPTIM_CFGR_WAVPOL /*!<The LPTIM output reflects the inverse of the compare results between LPTIMx_ARR and LPTIMx_CMP registers*/ /** * @} */ /** @defgroup LPTIM_LL_EC_PRESCALER Prescaler Value * @{ */ #define LL_LPTIM_PRESCALER_DIV1 0x00000000U /*!<Prescaler division factor is set to 1*/ #define LL_LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0 /*!<Prescaler division factor is set to 2*/ #define LL_LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1 /*!<Prescaler division factor is set to 4*/ #define LL_LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_0) /*!<Prescaler division factor is set to 8*/ #define LL_LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2 /*!<Prescaler division factor is set to 16*/ #define LL_LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_2 | LPTIM_CFGR_PRESC_0) /*!<Prescaler division factor is set to 32*/ #define LL_LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_2 | LPTIM_CFGR_PRESC_1) /*!<Prescaler division factor is set to 64*/ #define LL_LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC /*!<Prescaler division factor is set to 128*/ /** * @} */ /** @defgroup LPTIM_LL_EC_TRIG_SOURCE Trigger Source * @{ */ #define LL_LPTIM_TRIG_SOURCE_GPIO 0x00000000U /*!<External input trigger is connected to TIMx_ETR input*/ #define LL_LPTIM_TRIG_SOURCE_RTCALARMA LPTIM_CFGR_TRIGSEL_0 /*!<External input trigger is connected to RTC Alarm A*/ #define LL_LPTIM_TRIG_SOURCE_RTCALARMB LPTIM_CFGR_TRIGSEL_1 /*!<External input trigger is connected to RTC Alarm B*/ #define LL_LPTIM_TRIG_SOURCE_RTCTAMP1 (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_0) /*!<External input trigger is connected to RTC Tamper 1*/ #define LL_LPTIM_TRIG_SOURCE_TIM1_TRGO LPTIM_CFGR_TRIGSEL_2 /*!<External input trigger is connected to TIM1*/ #define LL_LPTIM_TRIG_SOURCE_TIM5_TRGO (LPTIM_CFGR_TRIGSEL_2 | LPTIM_CFGR_TRIGSEL_0) /*!<External input trigger is connected to TIM5*/ /** * @} */ /** @defgroup LPTIM_LL_EC_TRIG_FILTER Trigger Filter * @{ */ #define LL_LPTIM_TRIG_FILTER_NONE 0x00000000U /*!<Any trigger active level change is considered as a valid trigger*/ #define LL_LPTIM_TRIG_FILTER_2 LPTIM_CFGR_TRGFLT_0 /*!<Trigger active level change must be stable for at least 2 clock periods before it is considered as valid trigger*/ #define LL_LPTIM_TRIG_FILTER_4 LPTIM_CFGR_TRGFLT_1 /*!<Trigger active level change must be stable for at least 4 clock periods before it is considered as valid trigger*/ #define LL_LPTIM_TRIG_FILTER_8 LPTIM_CFGR_TRGFLT /*!<Trigger active level change must be stable for at least 8 clock periods before it is considered as valid trigger*/ /** * @} */ /** @defgroup LPTIM_LL_EC_TRIG_POLARITY Trigger Polarity * @{ */ #define LL_LPTIM_TRIG_POLARITY_RISING LPTIM_CFGR_TRIGEN_0 /*!<LPTIM counter starts when a rising edge is detected*/ #define LL_LPTIM_TRIG_POLARITY_FALLING LPTIM_CFGR_TRIGEN_1 /*!<LPTIM counter starts when a falling edge is detected*/ #define LL_LPTIM_TRIG_POLARITY_RISING_FALLING LPTIM_CFGR_TRIGEN /*!<LPTIM counter starts when a rising or a falling edge is detected*/ /** * @} */ /** @defgroup LPTIM_LL_EC_CLK_SOURCE Clock Source * @{ */ #define LL_LPTIM_CLK_SOURCE_INTERNAL 0x00000000U /*!<LPTIM is clocked by internal clock source (APB clock or any of the embedded oscillators)*/ #define LL_LPTIM_CLK_SOURCE_EXTERNAL LPTIM_CFGR_CKSEL /*!<LPTIM is clocked by an external clock source through the LPTIM external Input1*/ /** * @} */ /** @defgroup LPTIM_LL_EC_CLK_FILTER Clock Filter * @{ */ #define LL_LPTIM_CLK_FILTER_NONE 0x00000000U /*!<Any external clock signal level change is considered as a valid transition*/ #define LL_LPTIM_CLK_FILTER_2 LPTIM_CFGR_CKFLT_0 /*!<External clock signal level change must be stable for at least 2 clock periods before it is considered as valid transition*/ #define LL_LPTIM_CLK_FILTER_4 LPTIM_CFGR_CKFLT_1 /*!<External clock signal level change must be stable for at least 4 clock periods before it is considered as valid transition*/ #define LL_LPTIM_CLK_FILTER_8 LPTIM_CFGR_CKFLT /*!<External clock signal level change must be stable for at least 8 clock periods before it is considered as valid transition*/ /** * @} */ /** @defgroup LPTIM_LL_EC_CLK_POLARITY Clock Polarity * @{ */ #define LL_LPTIM_CLK_POLARITY_RISING 0x00000000U /*!< The rising edge is the active edge used for counting*/ #define LL_LPTIM_CLK_POLARITY_FALLING LPTIM_CFGR_CKPOL_0 /*!< The falling edge is the active edge used for counting*/ #define LL_LPTIM_CLK_POLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1 /*!< Both edges are active edges*/ /** * @} */ /** @defgroup LPTIM_LL_EC_ENCODER_MODE Encoder Mode * @{ */ #define LL_LPTIM_ENCODER_MODE_RISING 0x00000000U /*!< The rising edge is the active edge used for counting*/ #define LL_LPTIM_ENCODER_MODE_FALLING LPTIM_CFGR_CKPOL_0 /*!< The falling edge is the active edge used for counting*/ #define LL_LPTIM_ENCODER_MODE_RISING_FALLING LPTIM_CFGR_CKPOL_1 /*!< Both edges are active edges*/ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup LPTIM_LL_Exported_Macros LPTIM Exported Macros * @{ */ /** @defgroup LPTIM_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in LPTIM register * @param __INSTANCE__ LPTIM Instance * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_LPTIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) /** * @brief Read a value in LPTIM register * @param __INSTANCE__ LPTIM Instance * @param __REG__ Register to be read * @retval Register value */ #define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup LPTIM_LL_Exported_Functions LPTIM Exported Functions * @{ */ /** @defgroup LPTIM_LL_EF_LPTIM_Configuration LPTIM Configuration * @{ */ /** * @brief Enable the LPTIM instance * @note After setting the ENABLE bit, a delay of two counter clock is needed * before the LPTIM instance is actually enabled. * @rmtoll CR ENABLE LL_LPTIM_Enable * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); } /** * @brief Disable the LPTIM instance * @rmtoll CR ENABLE LL_LPTIM_Disable * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->CR, LPTIM_CR_ENABLE); } /** * @brief Indicates whether the LPTIM instance is enabled. * @rmtoll CR ENABLE LL_LPTIM_IsEnabled * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == (LPTIM_CR_ENABLE)); } /** * @brief Starts the LPTIM counter in the desired mode. * @note LPTIM instance must be enabled before starting the counter. * @note It is possible to change on the fly from One Shot mode to * Continuous mode. * @rmtoll CR CNTSTRT LL_LPTIM_StartCounter\n * CR SNGSTRT LL_LPTIM_StartCounter * @param LPTIMx Low-Power Timer instance * @param OperatingMode This parameter can be one of the following values: * @arg @ref LL_LPTIM_OPERATING_MODE_CONTINUOUS * @arg @ref LL_LPTIM_OPERATING_MODE_ONESHOT * @retval None */ __STATIC_INLINE void LL_LPTIM_StartCounter(LPTIM_TypeDef *LPTIMx, uint32_t OperatingMode) { MODIFY_REG(LPTIMx->CR, LPTIM_CR_CNTSTRT | LPTIM_CR_SNGSTRT, OperatingMode); } /** * @brief Set the LPTIM registers update mode (enable/disable register preload) * @note This function must be called when the LPTIM instance is disabled. * @rmtoll CFGR PRELOAD LL_LPTIM_SetUpdateMode * @param LPTIMx Low-Power Timer instance * @param UpdateMode This parameter can be one of the following values: * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD * @retval None */ __STATIC_INLINE void LL_LPTIM_SetUpdateMode(LPTIM_TypeDef *LPTIMx, uint32_t UpdateMode) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD, UpdateMode); } /** * @brief Get the LPTIM registers update mode * @rmtoll CFGR PRELOAD LL_LPTIM_GetUpdateMode * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD */ __STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD)); } /** * @brief Set the auto reload value * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled * @note After a write to the LPTIMx_ARR register a new write operation to the * same register can only be performed when the previous write operation * is completed. Any successive write before the ARROK flag be set, will * lead to unpredictable results. * @note autoreload value be strictly greater than the compare value. * @rmtoll ARR ARR LL_LPTIM_SetAutoReload * @param LPTIMx Low-Power Timer instance * @param AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_LPTIM_SetAutoReload(LPTIM_TypeDef *LPTIMx, uint32_t AutoReload) { MODIFY_REG(LPTIMx->ARR, LPTIM_ARR_ARR, AutoReload); } /** * @brief Get actual auto reload value * @rmtoll ARR ARR LL_LPTIM_GetAutoReload * @param LPTIMx Low-Power Timer instance * @retval AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->ARR, LPTIM_ARR_ARR)); } /** * @brief Set the compare value * @note After a write to the LPTIMx_CMP register a new write operation to the * same register can only be performed when the previous write operation * is completed. Any successive write before the CMPOK flag be set, will * lead to unpredictable results. * @rmtoll CMP CMP LL_LPTIM_SetCompare * @param LPTIMx Low-Power Timer instance * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF * @retval None */ __STATIC_INLINE void LL_LPTIM_SetCompare(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue) { MODIFY_REG(LPTIMx->CMP, LPTIM_CMP_CMP, CompareValue); } /** * @brief Get actual compare value * @rmtoll CMP CMP LL_LPTIM_GetCompare * @param LPTIMx Low-Power Timer instance * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF */ __STATIC_INLINE uint32_t LL_LPTIM_GetCompare(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CMP, LPTIM_CMP_CMP)); } /** * @brief Get actual counter value * @note When the LPTIM instance is running with an asynchronous clock, reading * the LPTIMx_CNT register may return unreliable values. So in this case * it is necessary to perform two consecutive read accesses and verify * that the two returned values are identical. * @rmtoll CNT CNT LL_LPTIM_GetCounter * @param LPTIMx Low-Power Timer instance * @retval Counter value */ __STATIC_INLINE uint32_t LL_LPTIM_GetCounter(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CNT, LPTIM_CNT_CNT)); } /** * @brief Set the counter mode (selection of the LPTIM counter clock source). * @note The counter mode can be set only when the LPTIM instance is disabled. * @rmtoll CFGR COUNTMODE LL_LPTIM_SetCounterMode * @param LPTIMx Low-Power Timer instance * @param CounterMode This parameter can be one of the following values: * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL * @retval None */ __STATIC_INLINE void LL_LPTIM_SetCounterMode(LPTIM_TypeDef *LPTIMx, uint32_t CounterMode) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE, CounterMode); } /** * @brief Get the counter mode * @rmtoll CFGR COUNTMODE LL_LPTIM_GetCounterMode * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL */ __STATIC_INLINE uint32_t LL_LPTIM_GetCounterMode(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE)); } /** * @brief Configure the LPTIM instance output (LPTIMx_OUT) * @note This function must be called when the LPTIM instance is disabled. * @note Regarding the LPTIM output polarity the change takes effect * immediately, so the output default value will change immediately after * the polarity is re-configured, even before the timer is enabled. * @rmtoll CFGR WAVE LL_LPTIM_ConfigOutput\n * CFGR WAVPOL LL_LPTIM_ConfigOutput * @param LPTIMx Low-Power Timer instance * @param Waveform This parameter can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE * @param Polarity This parameter can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE * @retval None */ __STATIC_INLINE void LL_LPTIM_ConfigOutput(LPTIM_TypeDef *LPTIMx, uint32_t Waveform, uint32_t Polarity) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL, Waveform | Polarity); } /** * @brief Set waveform shape * @rmtoll CFGR WAVE LL_LPTIM_SetWaveform * @param LPTIMx Low-Power Timer instance * @param Waveform This parameter can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE * @retval None */ __STATIC_INLINE void LL_LPTIM_SetWaveform(LPTIM_TypeDef *LPTIMx, uint32_t Waveform) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE, Waveform); } /** * @brief Get actual waveform shape * @rmtoll CFGR WAVE LL_LPTIM_GetWaveform * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE */ __STATIC_INLINE uint32_t LL_LPTIM_GetWaveform(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVE)); } /** * @brief Set output polarity * @rmtoll CFGR WAVPOL LL_LPTIM_SetPolarity * @param LPTIMx Low-Power Timer instance * @param Polarity This parameter can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE * @retval None */ __STATIC_INLINE void LL_LPTIM_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Polarity) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL, Polarity); } /** * @brief Get actual output polarity * @rmtoll CFGR WAVPOL LL_LPTIM_GetPolarity * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE */ __STATIC_INLINE uint32_t LL_LPTIM_GetPolarity(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL)); } /** * @brief Set actual prescaler division ratio. * @note This function must be called when the LPTIM instance is disabled. * @note When the LPTIM is configured to be clocked by an internal clock source * and the LPTIM counter is configured to be updated by active edges * detected on the LPTIM external Input1, the internal clock provided to * the LPTIM must be not be prescaled. * @rmtoll CFGR PRESC LL_LPTIM_SetPrescaler * @param LPTIMx Low-Power Timer instance * @param Prescaler This parameter can be one of the following values: * @arg @ref LL_LPTIM_PRESCALER_DIV1 * @arg @ref LL_LPTIM_PRESCALER_DIV2 * @arg @ref LL_LPTIM_PRESCALER_DIV4 * @arg @ref LL_LPTIM_PRESCALER_DIV8 * @arg @ref LL_LPTIM_PRESCALER_DIV16 * @arg @ref LL_LPTIM_PRESCALER_DIV32 * @arg @ref LL_LPTIM_PRESCALER_DIV64 * @arg @ref LL_LPTIM_PRESCALER_DIV128 * @retval None */ __STATIC_INLINE void LL_LPTIM_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Prescaler) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRESC, Prescaler); } /** * @brief Get actual prescaler division ratio. * @rmtoll CFGR PRESC LL_LPTIM_GetPrescaler * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_PRESCALER_DIV1 * @arg @ref LL_LPTIM_PRESCALER_DIV2 * @arg @ref LL_LPTIM_PRESCALER_DIV4 * @arg @ref LL_LPTIM_PRESCALER_DIV8 * @arg @ref LL_LPTIM_PRESCALER_DIV16 * @arg @ref LL_LPTIM_PRESCALER_DIV32 * @arg @ref LL_LPTIM_PRESCALER_DIV64 * @arg @ref LL_LPTIM_PRESCALER_DIV128 */ __STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRESC)); } /** * @} */ /** @defgroup LPTIM_LL_EF_Trigger_Configuration Trigger Configuration * @{ */ /** * @brief Enable the timeout function * @note This function must be called when the LPTIM instance is disabled. * @note The first trigger event will start the timer, any successive trigger * event will reset the counter and the timer will restart. * @note The timeout value corresponds to the compare value; if no trigger * occurs within the expected time frame, the MCU is waked-up by the * compare match event. * @rmtoll CFGR TIMOUT LL_LPTIM_EnableTimeout * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableTimeout(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); } /** * @brief Disable the timeout function * @note This function must be called when the LPTIM instance is disabled. * @note A trigger event arriving when the timer is already started will be * ignored. * @rmtoll CFGR TIMOUT LL_LPTIM_DisableTimeout * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT); } /** * @brief Indicate whether the timeout function is enabled. * @rmtoll CFGR TIMOUT LL_LPTIM_IsEnabledTimeout * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == (LPTIM_CFGR_TIMOUT)); } /** * @brief Start the LPTIM counter * @note This function must be called when the LPTIM instance is disabled. * @rmtoll CFGR TRIGEN LL_LPTIM_TrigSw * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN); } /** * @brief Configure the external trigger used as a trigger event for the LPTIM. * @note This function must be called when the LPTIM instance is disabled. * @note An internal clock source must be present when a digital filter is * required for the trigger. * @rmtoll CFGR TRIGSEL LL_LPTIM_ConfigTrigger\n * CFGR TRGFLT LL_LPTIM_ConfigTrigger\n * CFGR TRIGEN LL_LPTIM_ConfigTrigger * @param LPTIMx Low-Power Timer instance * @param Source This parameter can be one of the following values: * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM1_TRGO * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM5_TRGO * @param Filter This parameter can be one of the following values: * @arg @ref LL_LPTIM_TRIG_FILTER_NONE * @arg @ref LL_LPTIM_TRIG_FILTER_2 * @arg @ref LL_LPTIM_TRIG_FILTER_4 * @arg @ref LL_LPTIM_TRIG_FILTER_8 * @param Polarity This parameter can be one of the following values: * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING * (*) value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Source, uint32_t Filter, uint32_t Polarity) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL | LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGEN, Source | Filter | Polarity); } /** * @brief Get actual external trigger source. * @rmtoll CFGR TRIGSEL LL_LPTIM_GetTriggerSource * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM1_TRGO * @arg @ref LL_LPTIM_TRIG_SOURCE_TIM5_TRGO */ __STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL)); } /** * @brief Get actual external trigger filter. * @rmtoll CFGR TRGFLT LL_LPTIM_GetTriggerFilter * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_TRIG_FILTER_NONE * @arg @ref LL_LPTIM_TRIG_FILTER_2 * @arg @ref LL_LPTIM_TRIG_FILTER_4 * @arg @ref LL_LPTIM_TRIG_FILTER_8 */ __STATIC_INLINE uint32_t LL_LPTIM_GetTriggerFilter(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRGFLT)); } /** * @brief Get actual external trigger polarity. * @rmtoll CFGR TRIGEN LL_LPTIM_GetTriggerPolarity * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING */ __STATIC_INLINE uint32_t LL_LPTIM_GetTriggerPolarity(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN)); } /** * @} */ /** @defgroup LPTIM_LL_EF_Clock_Configuration Clock Configuration * @{ */ /** * @brief Set the source of the clock used by the LPTIM instance. * @note This function must be called when the LPTIM instance is disabled. * @rmtoll CFGR CKSEL LL_LPTIM_SetClockSource * @param LPTIMx Low-Power Timer instance * @param ClockSource This parameter can be one of the following values: * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL * @retval None */ __STATIC_INLINE void LL_LPTIM_SetClockSource(LPTIM_TypeDef *LPTIMx, uint32_t ClockSource) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKSEL, ClockSource); } /** * @brief Get actual LPTIM instance clock source. * @rmtoll CFGR CKSEL LL_LPTIM_GetClockSource * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL */ __STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKSEL)); } /** * @brief Configure the active edge or edges used by the counter when the LPTIM is clocked by an external clock source. * @note This function must be called when the LPTIM instance is disabled. * @note When both external clock signal edges are considered active ones, * the LPTIM must also be clocked by an internal clock source with a * frequency equal to at least four times the external clock frequency. * @note An internal clock source must be present when a digital filter is * required for external clock. * @rmtoll CFGR CKFLT LL_LPTIM_ConfigClock\n * CFGR CKPOL LL_LPTIM_ConfigClock * @param LPTIMx Low-Power Timer instance * @param ClockFilter This parameter can be one of the following values: * @arg @ref LL_LPTIM_CLK_FILTER_NONE * @arg @ref LL_LPTIM_CLK_FILTER_2 * @arg @ref LL_LPTIM_CLK_FILTER_4 * @arg @ref LL_LPTIM_CLK_FILTER_8 * @param ClockPolarity This parameter can be one of the following values: * @arg @ref LL_LPTIM_CLK_POLARITY_RISING * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING * @retval None */ __STATIC_INLINE void LL_LPTIM_ConfigClock(LPTIM_TypeDef *LPTIMx, uint32_t ClockFilter, uint32_t ClockPolarity) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKFLT | LPTIM_CFGR_CKPOL, ClockFilter | ClockPolarity); } /** * @brief Get actual clock polarity * @rmtoll CFGR CKPOL LL_LPTIM_GetClockPolarity * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_CLK_POLARITY_RISING * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING */ __STATIC_INLINE uint32_t LL_LPTIM_GetClockPolarity(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); } /** * @brief Get actual clock digital filter * @rmtoll CFGR CKFLT LL_LPTIM_GetClockFilter * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_CLK_FILTER_NONE * @arg @ref LL_LPTIM_CLK_FILTER_2 * @arg @ref LL_LPTIM_CLK_FILTER_4 * @arg @ref LL_LPTIM_CLK_FILTER_8 */ __STATIC_INLINE uint32_t LL_LPTIM_GetClockFilter(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKFLT)); } /** * @} */ /** @defgroup LPTIM_LL_EF_Encoder_Mode Encoder Mode * @{ */ /** * @brief Configure the encoder mode. * @note This function must be called when the LPTIM instance is disabled. * @rmtoll CFGR CKPOL LL_LPTIM_SetEncoderMode * @param LPTIMx Low-Power Timer instance * @param EncoderMode This parameter can be one of the following values: * @arg @ref LL_LPTIM_ENCODER_MODE_RISING * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING * @retval None */ __STATIC_INLINE void LL_LPTIM_SetEncoderMode(LPTIM_TypeDef *LPTIMx, uint32_t EncoderMode) { MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKPOL, EncoderMode); } /** * @brief Get actual encoder mode. * @rmtoll CFGR CKPOL LL_LPTIM_GetEncoderMode * @param LPTIMx Low-Power Timer instance * @retval Returned value can be one of the following values: * @arg @ref LL_LPTIM_ENCODER_MODE_RISING * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING */ __STATIC_INLINE uint32_t LL_LPTIM_GetEncoderMode(LPTIM_TypeDef *LPTIMx) { return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL)); } /** * @brief Enable the encoder mode * @note This function must be called when the LPTIM instance is disabled. * @note In this mode the LPTIM instance must be clocked by an internal clock * source. Also, the prescaler division ratio must be equal to 1. * @note LPTIM instance must be configured in continuous mode prior enabling * the encoder mode. * @rmtoll CFGR ENC LL_LPTIM_EnableEncoderMode * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableEncoderMode(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); } /** * @brief Disable the encoder mode * @note This function must be called when the LPTIM instance is disabled. * @rmtoll CFGR ENC LL_LPTIM_DisableEncoderMode * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC); } /** * @brief Indicates whether the LPTIM operates in encoder mode. * @rmtoll CFGR ENC LL_LPTIM_IsEnabledEncoderMode * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == (LPTIM_CFGR_ENC)); } /** * @} */ /** @defgroup LPTIM_LL_EF_FLAG_Management FLAG Management * @{ */ /** * @brief Clear the compare match flag (CMPMCF) * @rmtoll ICR CMPMCF LL_LPTIM_ClearFLAG_CMPM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFLAG_CMPM(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPMCF); } /** * @brief Inform application whether a compare match interrupt has occurred. * @rmtoll ISR CMPM LL_LPTIM_IsActiveFlag_CMPM * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPM(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == (LPTIM_ISR_CMPM)); } /** * @brief Clear the autoreload match flag (ARRMCF) * @rmtoll ICR ARRMCF LL_LPTIM_ClearFLAG_ARRM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFLAG_ARRM(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARRMCF); } /** * @brief Inform application whether a autoreload match interrupt has occured. * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == (LPTIM_ISR_ARRM)); } /** * @brief Clear the external trigger valid edge flag(EXTTRIGCF). * @rmtoll ICR EXTTRIGCF LL_LPTIM_ClearFlag_EXTTRIG * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_EXTTRIGCF); } /** * @brief Inform application whether a valid edge on the selected external trigger input has occurred. * @rmtoll ISR EXTTRIG LL_LPTIM_IsActiveFlag_EXTTRIG * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == (LPTIM_ISR_EXTTRIG)); } /** * @brief Clear the compare register update interrupt flag (CMPOKCF). * @rmtoll ICR CMPOKCF LL_LPTIM_ClearFlag_CMPOK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPOKCF); } /** * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully completed; If so, a new one can be initiated. * @rmtoll ISR CMPOK LL_LPTIM_IsActiveFlag_CMPOK * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPOK(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == (LPTIM_ISR_CMPOK)); } /** * @brief Clear the autoreload register update interrupt flag (ARROKCF). * @rmtoll ICR ARROKCF LL_LPTIM_ClearFlag_ARROK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARROKCF); } /** * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully completed; If so, a new one can be initiated. * @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == (LPTIM_ISR_ARROK)); } /** * @brief Clear the counter direction change to up interrupt flag (UPCF). * @rmtoll ICR UPCF LL_LPTIM_ClearFlag_UP * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_UPCF); } /** * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance operates in encoder mode). * @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == (LPTIM_ISR_UP)); } /** * @brief Clear the counter direction change to down interrupt flag (DOWNCF). * @rmtoll ICR DOWNCF LL_LPTIM_ClearFlag_DOWN * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->ICR, LPTIM_ICR_DOWNCF); } /** * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance operates in encoder mode). * @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == (LPTIM_ISR_DOWN)); } /** * @} */ /** @defgroup LPTIM_LL_EF_IT_Management Interrupt Management * @{ */ /** * @brief Enable compare match interrupt (CMPMIE). * @rmtoll IER CMPMIE LL_LPTIM_EnableIT_CMPM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_CMPM(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); } /** * @brief Disable compare match interrupt (CMPMIE). * @rmtoll IER CMPMIE LL_LPTIM_DisableIT_CMPM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_CMPM(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE); } /** * @brief Indicates whether the compare match interrupt (CMPMIE) is enabled. * @rmtoll IER CMPMIE LL_LPTIM_IsEnabledIT_CMPM * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPM(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == (LPTIM_IER_CMPMIE)); } /** * @brief Enable autoreload match interrupt (ARRMIE). * @rmtoll IER ARRMIE LL_LPTIM_EnableIT_ARRM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_ARRM(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); } /** * @brief Disable autoreload match interrupt (ARRMIE). * @rmtoll IER ARRMIE LL_LPTIM_DisableIT_ARRM * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE); } /** * @brief Indicates whether the autoreload match interrupt (ARRMIE) is enabled. * @rmtoll IER ARRMIE LL_LPTIM_IsEnabledIT_ARRM * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == (LPTIM_IER_ARRMIE)); } /** * @brief Enable external trigger valid edge interrupt (EXTTRIGIE). * @rmtoll IER EXTTRIGIE LL_LPTIM_EnableIT_EXTTRIG * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); } /** * @brief Disable external trigger valid edge interrupt (EXTTRIGIE). * @rmtoll IER EXTTRIGIE LL_LPTIM_DisableIT_EXTTRIG * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE); } /** * @brief Indicates external trigger valid edge interrupt (EXTTRIGIE) is enabled. * @rmtoll IER EXTTRIGIE LL_LPTIM_IsEnabledIT_EXTTRIG * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == (LPTIM_IER_EXTTRIGIE)); } /** * @brief Enable compare register write completed interrupt (CMPOKIE). * @rmtoll IER CMPOKIE LL_LPTIM_EnableIT_CMPOK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_CMPOK(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); } /** * @brief Disable compare register write completed interrupt (CMPOKIE). * @rmtoll IER CMPOKIE LL_LPTIM_DisableIT_CMPOK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_CMPOK(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE); } /** * @brief Indicates whether the compare register write completed interrupt (CMPOKIE) is enabled. * @rmtoll IER CMPOKIE LL_LPTIM_IsEnabledIT_CMPOK * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPOK(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == (LPTIM_IER_CMPOKIE)); } /** * @brief Enable autoreload register write completed interrupt (ARROKIE). * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_ARROK(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); } /** * @brief Disable autoreload register write completed interrupt (ARROKIE). * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE); } /** * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled. * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == (LPTIM_IER_ARROKIE)); } /** * @brief Enable direction change to up interrupt (UPIE). * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_UP(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_UPIE); } /** * @brief Disable direction change to up interrupt (UPIE). * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_UPIE); } /** * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled. * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == (LPTIM_IER_UPIE)); } /** * @brief Enable direction change to down interrupt (DOWNIE). * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_EnableIT_DOWN(LPTIM_TypeDef *LPTIMx) { SET_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); } /** * @brief Disable direction change to down interrupt (DOWNIE). * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN * @param LPTIMx Low-Power Timer instance * @retval None */ __STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx) { CLEAR_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE); } /** * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled. * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx) { return (READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == (LPTIM_IER_DOWNIE)); } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup LPTIM_LL_EF_Init Initialisation and deinitialisation functions * @{ */ ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx); void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct); ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* LPTIM1 */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_LPTIM_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/