Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c @ 129:239aa58b533d FlipDisplay
Added function to initialise structures with the actual ambient pressure
author | Ideenmodellierer |
---|---|
date | Sun, 17 Feb 2019 21:14:09 +0100 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_spdifrx.c * @author MCD Application Team * @brief This file provides firmware functions to manage the following * functionalities of the SPDIFRX audio interface: * + Initialization and Configuration * + Data transfers functions * + DMA transfers management * + Interrupts and flags management @verbatim =============================================================================== ##### How to use this driver ##### =============================================================================== [..] The SPDIFRX HAL driver can be used as follow: (#) Declare SPDIFRX_HandleTypeDef handle structure. (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API: (##) Enable the SPDIFRX interface clock. (##) SPDIFRX pins configuration: (+++) Enable the clock for the SPDIFRX GPIOs. (+++) Configure these SPDIFRX pins as alternate function pull-up. (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's). (+++) Configure the SPDIFRX interrupt priority. (+++) Enable the NVIC SPDIFRX IRQ handle. (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's). (+++) Declare a DMA handle structure for the reception of the Data Flow channel. (+++) Declare a DMA handle structure for the reception of the Control Flow channel. (+++) Enable the DMAx interface clock. (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters. (+++) Configure the DMA Channel. (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle. (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA CtrlRx/DataRx channel. (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits using HAL_SPDIFRX_Init() function. -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process. -@- Make sure that ck_spdif clock is configured. (#) Three operation modes are available within this driver : *** Polling mode for reception operation (for debug purpose) *** ================================================================ [..] (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow() (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow() *** Interrupt mode for reception operation *** ========================================= [..] (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT() (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT() (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback *** DMA mode for reception operation *** ======================================== [..] (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA() (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA() (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop() *** SPDIFRX HAL driver macros list *** ============================================= [..] Below the list of most used macros in SPDIFRX HAL driver. (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State) (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State) (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State) (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not. [..] (@) You can refer to the SPDIFRX HAL driver header file for more useful macros @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup SPDIFRX SPDIFRX * @brief SPDIFRX HAL module driver * @{ */ #ifdef HAL_SPDIFRX_MODULE_ENABLED #if defined(STM32F446xx) /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ #define SPDIFRX_TIMEOUT_VALUE 0xFFFF /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @addtogroup SPDIFRX_Private_Functions * @{ */ static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma); static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma); static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma); static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma); static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma); static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif); static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif); static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout); /** * @} */ /* Exported functions ---------------------------------------------------------*/ /** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions * @{ */ /** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim =============================================================================== ##### Initialization and de-initialization functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to initialize and de-initialize the SPDIFRX peripheral: (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with the selected configuration: (++) Input Selection (IN0, IN1,...) (++) Maximum allowed re-tries during synchronization phase (++) Wait for activity on SPDIF selected input (++) Channel status selection (from channel A or B) (++) Data format (LSB, MSB, ...) (++) Stereo mode (++) User bits masking (PT,C,U,V,...) (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration of the selected SPDIFRXx peripheral. @endverbatim * @{ */ /** * @brief Initializes the SPDIFRX according to the specified parameters * in the SPDIFRX_InitTypeDef and create the associated handle. * @param hspdif SPDIFRX handle * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif) { uint32_t tmpreg = 0U; /* Check the SPDIFRX handle allocation */ if(hspdif == NULL) { return HAL_ERROR; } /* Check the SPDIFRX parameters */ assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode)); assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection)); assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries)); assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity)); assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection)); assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat)); assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask)); assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask)); assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask)); assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask)); if(hspdif->State == HAL_SPDIFRX_STATE_RESET) { /* Allocate lock resource and initialize it */ hspdif->Lock = HAL_UNLOCKED; /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ HAL_SPDIFRX_MspInit(hspdif); } /* SPDIFRX peripheral state is BUSY*/ hspdif->State = HAL_SPDIFRX_STATE_BUSY; /* Disable SPDIFRX interface (IDLE State) */ __HAL_SPDIFRX_IDLE(hspdif); /* Reset the old SPDIFRX CR configuration */ tmpreg = hspdif->Instance->CR; tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK | SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA | SPDIFRX_CR_INSEL); /* Sets the new configuration of the SPDIFRX peripheral */ tmpreg |= ((uint16_t) hspdif->Init.StereoMode | hspdif->Init.InputSelection | hspdif->Init.Retries | hspdif->Init.WaitForActivity | hspdif->Init.ChannelSelection | hspdif->Init.DataFormat | hspdif->Init.PreambleTypeMask | hspdif->Init.ChannelStatusMask | hspdif->Init.ValidityBitMask | hspdif->Init.ParityErrorMask); hspdif->Instance->CR = tmpreg; hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; /* SPDIFRX peripheral state is READY*/ hspdif->State = HAL_SPDIFRX_STATE_READY; return HAL_OK; } /** * @brief DeInitializes the SPDIFRX peripheral * @param hspdif SPDIFRX handle * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif) { /* Check the SPDIFRX handle allocation */ if(hspdif == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance)); hspdif->State = HAL_SPDIFRX_STATE_BUSY; /* Disable SPDIFRX interface (IDLE state) */ __HAL_SPDIFRX_IDLE(hspdif); /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ HAL_SPDIFRX_MspDeInit(hspdif); hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; /* SPDIFRX peripheral state is RESET*/ hspdif->State = HAL_SPDIFRX_STATE_RESET; /* Release Lock */ __HAL_UNLOCK(hspdif); return HAL_OK; } /** * @brief SPDIFRX MSP Init * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_MspInit could be implemented in the user file */ } /** * @brief SPDIFRX MSP DeInit * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_MspDeInit could be implemented in the user file */ } /** * @brief Sets the SPDIFRX dtat format according to the specified parameters * in the SPDIFRX_InitTypeDef. * @param hspdif SPDIFRX handle * @param sDataFormat SPDIFRX data format * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat) { uint32_t tmpreg = 0U; /* Check the SPDIFRX handle allocation */ if(hspdif == NULL) { return HAL_ERROR; } /* Check the SPDIFRX parameters */ assert_param(IS_STEREO_MODE(sDataFormat.StereoMode)); assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat)); assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask)); assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask)); assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask)); assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask)); /* Reset the old SPDIFRX CR configuration */ tmpreg = hspdif->Instance->CR; if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) && (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) || ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode))) { return HAL_ERROR; } tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK | SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK); /* Sets the new configuration of the SPDIFRX peripheral */ tmpreg |= ((uint16_t) sDataFormat.StereoMode | sDataFormat.DataFormat | sDataFormat.PreambleTypeMask | sDataFormat.ChannelStatusMask | sDataFormat.ValidityBitMask | sDataFormat.ParityErrorMask); hspdif->Instance->CR = tmpreg; return HAL_OK; } /** * @} */ /** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions * @brief Data transfers functions * @verbatim =============================================================================== ##### IO operation functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to manage the SPDIFRX data transfers. (#) There is two mode of transfer: (++) Blocking mode : The communication is performed in the polling mode. The status of all data processing is returned by the same function after finishing transfer. (++) No-Blocking mode : The communication is performed using Interrupts or DMA. These functions return the status of the transfer start-up. The end of the data processing will be indicated through the dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. (#) Blocking mode functions are : (++) HAL_SPDIFRX_ReceiveDataFlow() (++) HAL_SPDIFRX_ReceiveControlFlow() (+@) Do not use blocking mode to receive both control and data flow at the same time. (#) No-Blocking mode functions with Interrupt are : (++) HAL_SPDIFRX_ReceiveControlFlow_IT() (++) HAL_SPDIFRX_ReceiveDataFlow_IT() (#) No-Blocking mode functions with DMA are : (++) HAL_SPDIFRX_ReceiveControlFlow_DMA() (++) HAL_SPDIFRX_ReceiveDataFlow_DMA() (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode: (++) HAL_SPDIFRX_RxCpltCallback() (++) HAL_SPDIFRX_ErrorCallback() @endverbatim * @{ */ /** * @brief Receives an amount of data (Data Flow) in blocking mode. * @param hspdif pointer to SPDIFRX_HandleTypeDef structure that contains * the configuration information for SPDIFRX module. * @param pData Pointer to data buffer * @param Size Amount of data to be received * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } if(hspdif->State == HAL_SPDIFRX_STATE_READY) { /* Process Locked */ __HAL_LOCK(hspdif); hspdif->State = HAL_SPDIFRX_STATE_BUSY; /* Start synchronisation */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK) { return HAL_TIMEOUT; } /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); /* Receive data flow */ while(Size > 0) { /* Wait until RXNE flag is set */ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK) { return HAL_TIMEOUT; } (*pData++) = hspdif->Instance->DR; Size--; } /* SPDIFRX ready */ hspdif->State = HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receives an amount of data (Control Flow) in blocking mode. * @param hspdif pointer to a SPDIFRX_HandleTypeDef structure that contains * the configuration information for SPDIFRX module. * @param pData Pointer to data buffer * @param Size Amount of data to be received * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } if(hspdif->State == HAL_SPDIFRX_STATE_READY) { /* Process Locked */ __HAL_LOCK(hspdif); hspdif->State = HAL_SPDIFRX_STATE_BUSY; /* Start synchronization */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK) { return HAL_TIMEOUT; } /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); /* Receive control flow */ while(Size > 0) { /* Wait until CSRNE flag is set */ if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK) { return HAL_TIMEOUT; } (*pData++) = hspdif->Instance->CSR; Size--; } /* SPDIFRX ready */ hspdif->State = HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt * @param hspdif SPDIFRX handle * @param pData a 32-bit pointer to the Receive data buffer. * @param Size number of data sample to be received . * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) { __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX)) { if((pData == NULL) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(hspdif); hspdif->pRxBuffPtr = pData; hspdif->RxXferSize = Size; hspdif->RxXferCount = Size; hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; /* Check if a receive process is ongoing or not */ hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; /* Enable the SPDIFRX PE Error Interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); /* Enable the SPDIFRX OVR Error Interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); /* Process Unlocked */ __HAL_UNLOCK(hspdif); /* Enable the SPDIFRX RXNE interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE); if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U) { /* Start synchronization */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ do { if (count-- == 0U) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); } return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receive an amount of data (Control Flow) with Interrupt * @param hspdif SPDIFRX handle * @param pData a 32-bit pointer to the Receive data buffer. * @param Size number of data sample (Control Flow) to be received : * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) { __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX)) { if((pData == NULL ) || (Size == 0)) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(hspdif); hspdif->pCsBuffPtr = pData; hspdif->CsXferSize = Size; hspdif->CsXferCount = Size; hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; /* Check if a receive process is ongoing or not */ hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; /* Enable the SPDIFRX PE Error Interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE); /* Enable the SPDIFRX OVR Error Interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE); /* Process Unlocked */ __HAL_UNLOCK(hspdif); /* Enable the SPDIFRX CSRNE interrupt */ __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE); if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U) { /* Start synchronization */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ do { if (count-- == 0U) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); } return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receive an amount of data (Data Flow) mode with DMA * @param hspdif SPDIFRX handle * @param pData a 32-bit pointer to the Receive data buffer. * @param Size number of data sample to be received : * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) { __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); if((pData == NULL) || (Size == 0)) { return HAL_ERROR; } if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX)) { hspdif->pRxBuffPtr = pData; hspdif->RxXferSize = Size; hspdif->RxXferCount = Size; /* Process Locked */ __HAL_LOCK(hspdif); hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX; /* Set the SPDIFRX Rx DMA Half transfer complete callback */ hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt; /* Set the SPDIFRX Rx DMA transfer complete callback */ hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt; /* Set the DMA error callback */ hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError; /* Enable the DMA request */ HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size); /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/ hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN; if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U) { /* Start synchronization */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ do { if (count-- == 0U) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); } /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief Receive an amount of data (Control Flow) with DMA * @param hspdif SPDIFRX handle * @param pData a 32-bit pointer to the Receive data buffer. * @param Size number of data (Control Flow) sample to be received : * @retval HAL status */ HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size) { __IO uint32_t count = SPDIFRX_TIMEOUT_VALUE * (SystemCoreClock / 24U / 1000U); if((pData == NULL) || (Size == 0)) { return HAL_ERROR; } if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX)) { hspdif->pCsBuffPtr = pData; hspdif->CsXferSize = Size; hspdif->CsXferCount = Size; /* Process Locked */ __HAL_LOCK(hspdif); hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE; hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX; /* Set the SPDIFRX Rx DMA Half transfer complete callback */ hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt; /* Set the SPDIFRX Rx DMA transfer complete callback */ hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt; /* Set the DMA error callback */ hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError; /* Enable the DMA request */ HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size); /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/ hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN; if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00U) { /* Start synchronization */ __HAL_SPDIFRX_SYNC(hspdif); /* Wait until SYNCD flag is set */ do { if (count-- == 0U) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } while (__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_SYNCD) == RESET); /* Start reception */ __HAL_SPDIFRX_RCV(hspdif); } /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_OK; } else { return HAL_BUSY; } } /** * @brief stop the audio stream receive from the Media. * @param hspdif SPDIFRX handle * @retval None */ HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif) { /* Process Locked */ __HAL_LOCK(hspdif); /* Disable the SPDIFRX DMA requests */ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); /* Disable the SPDIFRX DMA channel */ __HAL_DMA_DISABLE(hspdif->hdmaDrRx); __HAL_DMA_DISABLE(hspdif->hdmaCsRx); /* Disable SPDIFRX peripheral */ __HAL_SPDIFRX_IDLE(hspdif); hspdif->State = HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_OK; } /** * @brief This function handles SPDIFRX interrupt request. * @param hspdif SPDIFRX handle * @retval HAL status */ void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif) { /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET)) { __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE); SPDIFRX_ReceiveDataFlow_IT(hspdif); } /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET)) { __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE); SPDIFRX_ReceiveControlFlow_IT(hspdif); } /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET)) { __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR); /* Change the SPDIFRX error code */ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR; /* the transfer is not stopped */ HAL_SPDIFRX_ErrorCallback(hspdif); } /* SPDIFRX Parity error interrupt occurred ---------------------------------*/ if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET)) { __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR); /* Change the SPDIFRX error code */ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE; /* the transfer is not stopped */ HAL_SPDIFRX_ErrorCallback(hspdif); } } /** * @brief Rx Transfer (Data flow) half completed callbacks * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file */ } /** * @brief Rx Transfer (Data flow) completed callbacks * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file */ } /** * @brief Rx (Control flow) Transfer half completed callbacks * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file */ } /** * @brief Rx Transfer (Control flow) completed callbacks * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file */ } /** * @brief SPDIFRX error callbacks * @param hspdif SPDIFRX handle * @retval None */ __weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif) { /* Prevent unused argument(s) compilation warning */ UNUSED(hspdif); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_SPDIFRX_ErrorCallback could be implemented in the user file */ } /** * @} */ /** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions * @brief Peripheral State functions * @verbatim =============================================================================== ##### Peripheral State and Errors functions ##### =============================================================================== [..] This subsection permit to get in run-time the status of the peripheral and the data flow. @endverbatim * @{ */ /** * @brief Return the SPDIFRX state * @param hspdif SPDIFRX handle * @retval HAL state */ HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif) { return hspdif->State; } /** * @brief Return the SPDIFRX error code * @param hspdif SPDIFRX handle * @retval SPDIFRX Error Code */ uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif) { return hspdif->ErrorCode; } /** * @} */ /** * @brief DMA SPDIFRX receive process (Data flow) complete callback * @param hdma DMA handle * @retval None */ static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma) { SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* Disable Rx DMA Request */ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN); hspdif->RxXferCount = 0U; hspdif->State = HAL_SPDIFRX_STATE_READY; HAL_SPDIFRX_RxCpltCallback(hspdif); } /** * @brief DMA SPDIFRX receive process (Data flow) half complete callback * @param hdma DMA handle * @retval None */ static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma) { SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; HAL_SPDIFRX_RxHalfCpltCallback(hspdif); } /** * @brief DMA SPDIFRX receive process (Control flow) complete callback * @param hdma DMA handle * @retval None */ static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma) { SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* Disable Cb DMA Request */ hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN); hspdif->CsXferCount = 0U; hspdif->State = HAL_SPDIFRX_STATE_READY; HAL_SPDIFRX_CxCpltCallback(hspdif); } /** * @brief DMA SPDIFRX receive process (Control flow) half complete callback * @param hdma DMA handle * @retval None */ static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma) { SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; HAL_SPDIFRX_CxHalfCpltCallback(hspdif); } /** * @brief DMA SPDIFRX communication error callback * @param hdma DMA handle * @retval None */ static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma) { SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; /* Disable Rx and Cb DMA Request */ hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN)); hspdif->RxXferCount = 0U; hspdif->State= HAL_SPDIFRX_STATE_READY; /* Set the error code and execute error callback*/ hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA; HAL_SPDIFRX_ErrorCallback(hspdif); } /** * @brief Receive an amount of data (Data Flow) with Interrupt * @param hspdif SPDIFRX handle * @retval None */ static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif) { /* Receive data */ (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR; hspdif->RxXferCount--; if(hspdif->RxXferCount == 0U) { /* Disable RXNE/PE and OVR interrupts */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE); hspdif->State = HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); HAL_SPDIFRX_RxCpltCallback(hspdif); } } /** * @brief Receive an amount of data (Control Flow) with Interrupt * @param hspdif SPDIFRX handle * @retval None */ static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif) { /* Receive data */ (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR; hspdif->CsXferCount--; if(hspdif->CsXferCount == 0U) { /* Disable CSRNE interrupt */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); hspdif->State = HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); HAL_SPDIFRX_CxCpltCallback(hspdif); } } /** * @brief This function handles SPDIFRX Communication Timeout. * @param hspdif SPDIFRX handle * @param Flag Flag checked * @param Status Value of the flag expected * @param Timeout Duration of the timeout * @retval HAL status */ static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout) { uint32_t tickstart = 0U; /* Get tick */ tickstart = HAL_GetTick(); /* Wait until flag is set */ if(Status == RESET) { while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET) { /* Check for the Timeout */ if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } } } else { while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET) { /* Check for the Timeout */ if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) { /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE); __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE); hspdif->State= HAL_SPDIFRX_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hspdif); return HAL_TIMEOUT; } } } } return HAL_OK; } /** * @} */ #endif /* STM32F446xx */ #endif /* HAL_SPDIFRX_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/