Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 961:2130d771c8db Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Bootloader: Activate Hardware data defaults: The hardware data was not part of the build to avoid overwriting of existing data. For initial HW bringup the data is now active (define 0xFF values) and placed at the correct flash location (allocation was missing before).
author Ideenmodellierer
date Sun, 12 Jan 2025 19:15:20 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit