Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 1065:1f2067cad41b Icon_Integration

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Mixed sensor operation improvment: A peak detector has been added to the adc measurement to avoid interferance while UART sensor are taking measurement while adc is active. The previous approach to shift adc into time windows where no UART were active had to be replaced because for the CO2 sensor is continously taking samples without providing a sync signal. In addition the UART MUX switching behavior has been improved (potential rx data received from previous sensor is discarded during channel switch etc.)
author Ideenmodellierer
date Mon, 16 Feb 2026 21:27:26 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit