Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 813:1e688b630a6e
Used real sensor state in simulation:
In previous version the status information of the digital O2 sensors were not forwarded to the simulator. As result the simulator did not show the failure reaction in case of error injection using the RTE.
In the new version the status information provided by RTE is used within the simulator.
author | Ideenmodellierer |
---|---|
date | Sun, 03 Sep 2023 17:53:07 +0200 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit