view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_dma2d.c @ 813:1e688b630a6e

Used real sensor state in simulation: In previous version the status information of the digital O2 sensors were not forwarded to the simulator. As result the simulator did not show the failure reaction in case of error injection using the RTE. In the new version the status information provided by RTE is used within the simulator.
author Ideenmodellierer
date Sun, 03 Sep 2023 17:53:07 +0200
parents c78bcbd5deda
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    stm32f4xx_ll_dma2d.c
  * @author  MCD Application Team
  * @brief   DMA2D LL module driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
#if defined(USE_FULL_LL_DRIVER)

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_ll_dma2d.h"
#include "stm32f4xx_ll_bus.h"
#ifdef  USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif

/** @addtogroup STM32F4xx_LL_Driver
  * @{
  */

#if defined (DMA2D)

/** @addtogroup DMA2D_LL
  * @{
  */

/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup DMA2D_LL_Private_Constants DMA2D Private Constants
  * @{
  */
#define LL_DMA2D_COLOR            0xFFU                                      /*!< Maximum output color setting                   */
#define LL_DMA2D_NUMBEROFLINES    DMA2D_NLR_NL                               /*!< Maximum number of lines                        */
#define LL_DMA2D_NUMBEROFPIXELS   (DMA2D_NLR_PL >> DMA2D_NLR_PL_Pos)         /*!< Maximum number of pixels per lines             */
#define LL_DMA2D_OFFSET_MAX       0x3FFFU                                    /*!< Maximum output line offset expressed in pixels */
#define LL_DMA2D_CLUTSIZE_MAX     0xFFU                                      /*!< Maximum CLUT size                              */
/**
  * @}
  */
/* Private macros ------------------------------------------------------------*/
/** @addtogroup DMA2D_LL_Private_Macros
  * @{
  */
#define IS_LL_DMA2D_MODE(MODE)          (((MODE) == LL_DMA2D_MODE_M2M)       || \
                                         ((MODE) == LL_DMA2D_MODE_M2M_PFC)   || \
                                         ((MODE) == LL_DMA2D_MODE_M2M_BLEND) || \
                                         ((MODE) == LL_DMA2D_MODE_R2M))

#define IS_LL_DMA2D_OCMODE(MODE_ARGB)   (((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB8888) || \
                                         ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB888)   || \
                                         ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_RGB565)   || \
                                         ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB1555) || \
                                         ((MODE_ARGB) == LL_DMA2D_OUTPUT_MODE_ARGB4444))

#define IS_LL_DMA2D_GREEN(GREEN)        ((GREEN) <= LL_DMA2D_COLOR)
#define IS_LL_DMA2D_RED(RED)            ((RED)   <= LL_DMA2D_COLOR)
#define IS_LL_DMA2D_BLUE(BLUE)          ((BLUE)  <= LL_DMA2D_COLOR)
#define IS_LL_DMA2D_ALPHA(ALPHA)        ((ALPHA) <= LL_DMA2D_COLOR)

#define IS_LL_DMA2D_OFFSET(OFFSET)      ((OFFSET) <= LL_DMA2D_OFFSET_MAX)

#define IS_LL_DMA2D_LINE(LINES)         ((LINES)  <= LL_DMA2D_NUMBEROFLINES)
#define IS_LL_DMA2D_PIXEL(PIXELS)       ((PIXELS) <= LL_DMA2D_NUMBEROFPIXELS)

#define IS_LL_DMA2D_LCMODE(MODE_ARGB)   (((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB8888) || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB888)   || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_RGB565)   || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB1555) || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_ARGB4444) || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L8)       || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL44)     || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_AL88)     || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_L4)       || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A8)       || \
                                         ((MODE_ARGB) == LL_DMA2D_INPUT_MODE_A4))

#define IS_LL_DMA2D_CLUTCMODE(CLUTCMODE) (((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_ARGB8888) || \
                                          ((CLUTCMODE) == LL_DMA2D_CLUT_COLOR_MODE_RGB888))

#define IS_LL_DMA2D_CLUTSIZE(SIZE)      ((SIZE) <= LL_DMA2D_CLUTSIZE_MAX)

#define IS_LL_DMA2D_ALPHAMODE(MODE)     (((MODE) == LL_DMA2D_ALPHA_MODE_NO_MODIF) || \
                                         ((MODE) == LL_DMA2D_ALPHA_MODE_REPLACE)  || \
                                         ((MODE) == LL_DMA2D_ALPHA_MODE_COMBINE))
/**
  * @}
  */

/* Private function prototypes -----------------------------------------------*/

/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA2D_LL_Exported_Functions
  * @{
  */

/** @addtogroup DMA2D_LL_EF_Init_Functions Initialization and De-initialization Functions
  * @{
  */

/**
  * @brief  De-initialize DMA2D registers (registers restored to their default values).
  * @param  DMA2Dx DMA2D Instance
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: DMA2D registers are de-initialized
  *          - ERROR: DMA2D registers are not de-initialized
  */
ErrorStatus LL_DMA2D_DeInit(DMA2D_TypeDef *DMA2Dx)
{
  ErrorStatus status = SUCCESS;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));

  if (DMA2Dx == DMA2D)
  {
    /* Force reset of DMA2D clock */
    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2D);

    /* Release reset of DMA2D clock */
    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2D);
  }
  else
  {
    status = ERROR;
  }

  return (status);
}

/**
  * @brief  Initialize DMA2D registers according to the specified parameters in DMA2D_InitStruct.
  * @note   DMA2D transfers must be disabled to set initialization bits in configuration registers,
  *         otherwise ERROR result is returned.
  * @param  DMA2Dx DMA2D Instance
  * @param  DMA2D_InitStruct pointer to a LL_DMA2D_InitTypeDef structure
  *         that contains the configuration information for the specified DMA2D peripheral.
  * @retval An ErrorStatus enumeration value:
  *          - SUCCESS: DMA2D registers are initialized according to DMA2D_InitStruct content
  *          - ERROR: Issue occurred during DMA2D registers initialization
  */
ErrorStatus LL_DMA2D_Init(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_InitTypeDef *DMA2D_InitStruct)
{
  ErrorStatus status = ERROR;
  LL_DMA2D_ColorTypeDef DMA2D_ColorStruct;
  uint32_t tmp = 0U, tmp1 = 0U, tmp2 = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_MODE(DMA2D_InitStruct->Mode));
  assert_param(IS_LL_DMA2D_OCMODE(DMA2D_InitStruct->ColorMode));
  assert_param(IS_LL_DMA2D_LINE(DMA2D_InitStruct->NbrOfLines));
  assert_param(IS_LL_DMA2D_PIXEL(DMA2D_InitStruct->NbrOfPixelsPerLines));
  assert_param(IS_LL_DMA2D_GREEN(DMA2D_InitStruct->OutputGreen));
  assert_param(IS_LL_DMA2D_RED(DMA2D_InitStruct->OutputRed));
  assert_param(IS_LL_DMA2D_BLUE(DMA2D_InitStruct->OutputBlue));
  assert_param(IS_LL_DMA2D_ALPHA(DMA2D_InitStruct->OutputAlpha));
  assert_param(IS_LL_DMA2D_OFFSET(DMA2D_InitStruct->LineOffset));

  /* DMA2D transfers must be disabled to configure bits in initialization registers */
  tmp = LL_DMA2D_IsTransferOngoing(DMA2Dx);
  tmp1 = LL_DMA2D_FGND_IsEnabledCLUTLoad(DMA2Dx);
  tmp2 = LL_DMA2D_BGND_IsEnabledCLUTLoad(DMA2Dx);
  if ((tmp == 0U) && (tmp1 == 0U) && (tmp2 == 0U))
  {
    /* DMA2D CR register configuration -------------------------------------------*/
    LL_DMA2D_SetMode(DMA2Dx, DMA2D_InitStruct->Mode);

    /* DMA2D OPFCCR register configuration ---------------------------------------*/
    MODIFY_REG(DMA2Dx->OPFCCR, DMA2D_OPFCCR_CM, DMA2D_InitStruct->ColorMode);

    /* DMA2D OOR register configuration ------------------------------------------*/
    LL_DMA2D_SetLineOffset(DMA2Dx, DMA2D_InitStruct->LineOffset);

    /* DMA2D NLR register configuration ------------------------------------------*/
    LL_DMA2D_ConfigSize(DMA2Dx, DMA2D_InitStruct->NbrOfLines, DMA2D_InitStruct->NbrOfPixelsPerLines);

    /* DMA2D OMAR register configuration ------------------------------------------*/
    LL_DMA2D_SetOutputMemAddr(DMA2Dx, DMA2D_InitStruct->OutputMemoryAddress);

    /* DMA2D OCOLR register configuration ------------------------------------------*/
    DMA2D_ColorStruct.ColorMode   = DMA2D_InitStruct->ColorMode;
    DMA2D_ColorStruct.OutputBlue  = DMA2D_InitStruct->OutputBlue;
    DMA2D_ColorStruct.OutputGreen = DMA2D_InitStruct->OutputGreen;
    DMA2D_ColorStruct.OutputRed   = DMA2D_InitStruct->OutputRed;
    DMA2D_ColorStruct.OutputAlpha = DMA2D_InitStruct->OutputAlpha;
    LL_DMA2D_ConfigOutputColor(DMA2Dx, &DMA2D_ColorStruct);

    status = SUCCESS;
  }
  /* If DMA2D transfers are not disabled, return ERROR */

  return (status);
}

/**
  * @brief Set each @ref LL_DMA2D_InitTypeDef field to default value.
  * @param DMA2D_InitStruct pointer to a @ref LL_DMA2D_InitTypeDef structure
  *                          whose fields will be set to default values.
  * @retval None
  */
void LL_DMA2D_StructInit(LL_DMA2D_InitTypeDef *DMA2D_InitStruct)
{
  /* Set DMA2D_InitStruct fields to default values */
  DMA2D_InitStruct->Mode                = LL_DMA2D_MODE_M2M;
  DMA2D_InitStruct->ColorMode           = LL_DMA2D_OUTPUT_MODE_ARGB8888;
  DMA2D_InitStruct->NbrOfLines          = 0x0U;
  DMA2D_InitStruct->NbrOfPixelsPerLines = 0x0U;
  DMA2D_InitStruct->LineOffset          = 0x0U;
  DMA2D_InitStruct->OutputBlue          = 0x0U;
  DMA2D_InitStruct->OutputGreen         = 0x0U;
  DMA2D_InitStruct->OutputRed           = 0x0U;
  DMA2D_InitStruct->OutputAlpha         = 0x0U;
  DMA2D_InitStruct->OutputMemoryAddress = 0x0U;
}

/**
  * @brief  Configure the foreground or background according to the specified parameters
  *         in the LL_DMA2D_LayerCfgTypeDef structure.
  * @param  DMA2Dx DMA2D Instance
  * @param  DMA2D_LayerCfg pointer to a LL_DMA2D_LayerCfgTypeDef structure that contains
  *         the configuration information for the specified layer.
  * @param  LayerIdx DMA2D Layer index.
  *                   This parameter can be one of the following values:
  *                   0(background) / 1(foreground)
  * @retval None
  */
void LL_DMA2D_ConfigLayer(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg, uint32_t LayerIdx)
{
  /* Check the parameters */
  assert_param(IS_LL_DMA2D_OFFSET(DMA2D_LayerCfg->LineOffset));
  assert_param(IS_LL_DMA2D_LCMODE(DMA2D_LayerCfg->ColorMode));
  assert_param(IS_LL_DMA2D_CLUTCMODE(DMA2D_LayerCfg->CLUTColorMode));
  assert_param(IS_LL_DMA2D_CLUTSIZE(DMA2D_LayerCfg->CLUTSize));
  assert_param(IS_LL_DMA2D_ALPHAMODE(DMA2D_LayerCfg->AlphaMode));
  assert_param(IS_LL_DMA2D_GREEN(DMA2D_LayerCfg->Green));
  assert_param(IS_LL_DMA2D_RED(DMA2D_LayerCfg->Red));
  assert_param(IS_LL_DMA2D_BLUE(DMA2D_LayerCfg->Blue));
  assert_param(IS_LL_DMA2D_ALPHA(DMA2D_LayerCfg->Alpha));

  if (LayerIdx == 0U)
  {
    /* Configure the background memory address */
    LL_DMA2D_BGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress);

    /* Configure the background line offset */
    LL_DMA2D_BGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset);

    /* Configure the background Alpha value, Alpha mode, CLUT size, CLUT Color mode and Color mode */
    MODIFY_REG(DMA2Dx->BGPFCCR, \
               (DMA2D_BGPFCCR_ALPHA | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM | DMA2D_BGPFCCR_CM), \
               ((DMA2D_LayerCfg->Alpha << DMA2D_BGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->AlphaMode | \
                (DMA2D_LayerCfg->CLUTSize << DMA2D_BGPFCCR_CS_Pos) | DMA2D_LayerCfg->CLUTColorMode | \
                DMA2D_LayerCfg->ColorMode));

    /* Configure the background color */
    LL_DMA2D_BGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue);

    /* Configure the background CLUT memory address */
    LL_DMA2D_BGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress);
  }
  else
  {
    /* Configure the foreground memory address */
    LL_DMA2D_FGND_SetMemAddr(DMA2Dx, DMA2D_LayerCfg->MemoryAddress);

    /* Configure the foreground line offset */
    LL_DMA2D_FGND_SetLineOffset(DMA2Dx, DMA2D_LayerCfg->LineOffset);

    /* Configure the foreground Alpha value, Alpha mode, CLUT size, CLUT Color mode and Color mode */
    MODIFY_REG(DMA2Dx->FGPFCCR, \
               (DMA2D_FGPFCCR_ALPHA | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM | DMA2D_FGPFCCR_CM), \
               ((DMA2D_LayerCfg->Alpha << DMA2D_FGPFCCR_ALPHA_Pos) | DMA2D_LayerCfg->AlphaMode | \
                (DMA2D_LayerCfg->CLUTSize << DMA2D_FGPFCCR_CS_Pos) | DMA2D_LayerCfg->CLUTColorMode | \
                DMA2D_LayerCfg->ColorMode));

    /* Configure the foreground color */
    LL_DMA2D_FGND_SetColor(DMA2Dx, DMA2D_LayerCfg->Red, DMA2D_LayerCfg->Green, DMA2D_LayerCfg->Blue);

    /* Configure the foreground CLUT memory address */
    LL_DMA2D_FGND_SetCLUTMemAddr(DMA2Dx, DMA2D_LayerCfg->CLUTMemoryAddress);
  }
}

/**
  * @brief Set each @ref LL_DMA2D_LayerCfgTypeDef field to default value.
  * @param DMA2D_LayerCfg pointer to a @ref LL_DMA2D_LayerCfgTypeDef structure
  *                        whose fields will be set to default values.
  * @retval None
  */
void LL_DMA2D_LayerCfgStructInit(LL_DMA2D_LayerCfgTypeDef *DMA2D_LayerCfg)
{
  /* Set DMA2D_LayerCfg fields to default values */
  DMA2D_LayerCfg->MemoryAddress      = 0x0U;
  DMA2D_LayerCfg->ColorMode          = LL_DMA2D_INPUT_MODE_ARGB8888;
  DMA2D_LayerCfg->LineOffset         = 0x0U;
  DMA2D_LayerCfg->CLUTColorMode      = LL_DMA2D_CLUT_COLOR_MODE_ARGB8888;
  DMA2D_LayerCfg->CLUTSize           = 0x0U;
  DMA2D_LayerCfg->AlphaMode          = LL_DMA2D_ALPHA_MODE_NO_MODIF;
  DMA2D_LayerCfg->Alpha              = 0x0U;
  DMA2D_LayerCfg->Blue               = 0x0U;
  DMA2D_LayerCfg->Green              = 0x0U;
  DMA2D_LayerCfg->Red                = 0x0U;
  DMA2D_LayerCfg->CLUTMemoryAddress  = 0x0U;
}

/**
  * @brief  Initialize DMA2D output color register according to the specified parameters
  *         in DMA2D_ColorStruct.
  * @param  DMA2Dx DMA2D Instance
  * @param  DMA2D_ColorStruct pointer to a LL_DMA2D_ColorTypeDef structure that contains
  *         the color configuration information for the specified DMA2D peripheral.
  * @retval None
  */
void LL_DMA2D_ConfigOutputColor(DMA2D_TypeDef *DMA2Dx, LL_DMA2D_ColorTypeDef *DMA2D_ColorStruct)
{
  uint32_t outgreen = 0U;
  uint32_t outred   = 0U;
  uint32_t outalpha = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_OCMODE(DMA2D_ColorStruct->ColorMode));
  assert_param(IS_LL_DMA2D_GREEN(DMA2D_ColorStruct->OutputGreen));
  assert_param(IS_LL_DMA2D_RED(DMA2D_ColorStruct->OutputRed));
  assert_param(IS_LL_DMA2D_BLUE(DMA2D_ColorStruct->OutputBlue));
  assert_param(IS_LL_DMA2D_ALPHA(DMA2D_ColorStruct->OutputAlpha));

  /* DMA2D OCOLR register configuration ------------------------------------------*/
  if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888)
  {
    outgreen = DMA2D_ColorStruct->OutputGreen << 8U;
    outred = DMA2D_ColorStruct->OutputRed << 16U;
    outalpha = DMA2D_ColorStruct->OutputAlpha << 24U;
  }
  else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888)
  {
    outgreen = DMA2D_ColorStruct->OutputGreen << 8U;
    outred = DMA2D_ColorStruct->OutputRed << 16U;
    outalpha = 0x00000000U;
  }
  else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)
  {
    outgreen = DMA2D_ColorStruct->OutputGreen << 5U;
    outred = DMA2D_ColorStruct->OutputRed << 11U;
    outalpha = 0x00000000U;
  }
  else if (DMA2D_ColorStruct->ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555)
  {
    outgreen = DMA2D_ColorStruct->OutputGreen << 5U;
    outred = DMA2D_ColorStruct->OutputRed << 10U;
    outalpha = DMA2D_ColorStruct->OutputAlpha << 15U;
  }
  else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */
  {
    outgreen = DMA2D_ColorStruct->OutputGreen << 4U;
    outred = DMA2D_ColorStruct->OutputRed << 8U;
    outalpha = DMA2D_ColorStruct->OutputAlpha << 12U;
  }
  LL_DMA2D_SetOutputColor(DMA2Dx, (outgreen | outred | DMA2D_ColorStruct->OutputBlue | outalpha));
}

/**
  * @brief  Return DMA2D output Blue color.
  * @param  DMA2Dx DMA2D Instance.
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  * @retval Output Blue color value between Min_Data=0 and Max_Data=0xFF
  */
uint32_t LL_DMA2D_GetOutputBlueColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  uint32_t color = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_OCMODE(ColorMode));

  /* DMA2D OCOLR register reading ------------------------------------------*/
  if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU));
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFFU));
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU));
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x1FU));
  }
  else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFU));
  }
  
  return color;
}

/**
  * @brief  Return DMA2D output Green color.
  * @param  DMA2Dx DMA2D Instance.
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  * @retval Output Green color value between Min_Data=0 and Max_Data=0xFF
  */
uint32_t LL_DMA2D_GetOutputGreenColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  uint32_t color = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_OCMODE(ColorMode));

  /* DMA2D OCOLR register reading ------------------------------------------*/
  if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF00U) >> 8U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7E0U) >> 5U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x3E0U) >> 5U);
  }
  else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF0U) >> 4U);
  }
  
  return color;
}

/**
  * @brief  Return DMA2D output Red color.
  * @param  DMA2Dx DMA2D Instance.
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  * @retval Output Red color value between Min_Data=0 and Max_Data=0xFF
  */
uint32_t LL_DMA2D_GetOutputRedColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  uint32_t color = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_OCMODE(ColorMode));

  /* DMA2D OCOLR register reading ------------------------------------------*/
  if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF0000U) >> 16U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF800U) >> 11U);
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x7C00U) >> 10U);
  }
  else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF00U) >> 8U);
  }
  
  return color;
}

/**
  * @brief  Return DMA2D output Alpha color.
  * @param  DMA2Dx DMA2D Instance.
  * @param  ColorMode This parameter can be one of the following values:
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB8888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB888
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_RGB565
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB1555
  *         @arg @ref LL_DMA2D_OUTPUT_MODE_ARGB4444
  * @retval Output Alpha color value between Min_Data=0 and Max_Data=0xFF
  */
uint32_t LL_DMA2D_GetOutputAlphaColor(DMA2D_TypeDef *DMA2Dx, uint32_t ColorMode)
{
  uint32_t color = 0U;

  /* Check the parameters */
  assert_param(IS_DMA2D_ALL_INSTANCE(DMA2Dx));
  assert_param(IS_LL_DMA2D_OCMODE(ColorMode));

  /* DMA2D OCOLR register reading ------------------------------------------*/
  if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB8888)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xFF000000U) >> 24U);
  }
  else if ((ColorMode == LL_DMA2D_OUTPUT_MODE_RGB888) || (ColorMode == LL_DMA2D_OUTPUT_MODE_RGB565))
  {
    color = 0x0U;
  }
  else if (ColorMode == LL_DMA2D_OUTPUT_MODE_ARGB1555)
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0x8000U) >> 15U);
  }
  else /* ColorMode = LL_DMA2D_OUTPUT_MODE_ARGB4444 */
  {
    color = (uint32_t)(READ_BIT(DMA2Dx->OCOLR, 0xF000U) >> 12U);
  }
  
  return color;
}

/**
  * @brief  Configure DMA2D transfer size.
  * @param  DMA2Dx DMA2D Instance
  * @param  NbrOfLines Value between Min_Data=0 and Max_Data=0xFFFF
  * @param  NbrOfPixelsPerLines Value between Min_Data=0 and Max_Data=0x3FFF
  * @retval None
  */
void LL_DMA2D_ConfigSize(DMA2D_TypeDef *DMA2Dx, uint32_t NbrOfLines, uint32_t NbrOfPixelsPerLines)
{
  MODIFY_REG(DMA2Dx->NLR, (DMA2D_NLR_PL | DMA2D_NLR_NL), \
             ((NbrOfPixelsPerLines << DMA2D_NLR_PL_Pos) | NbrOfLines));
}

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#endif /* defined (DMA2D) */

/**
  * @}
  */

#endif /* USE_FULL_LL_DRIVER */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/