Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 567:1c95f811967c

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
-Add 12HR Time Support -Add firmware image only font extensions -Show english units when required in log's graphs -Show decompression info with Font84 if 10 characters long -Remove usage of ' symbol to denote minutes and instead use min abbreviation -Show english units when required on the simulation configuration screen -Remove usage of ' symbol to denote feet in in non-metric mode and use ft abbrevation
author izzni
date Tue, 24 Nov 2020 13:22:23 -0600
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit