view Discovery/Inc/ostc.h @ 567:1c95f811967c
-Add 12HR Time Support
-Add firmware image only font extensions
-Show english units when required in log's graphs
-Show decompression info with Font84 if 10 characters long
-Remove usage of ' symbol to denote minutes and instead use min abbreviation
-Show english units when required on the simulation configuration screen
-Remove usage of ' symbol to denote feet in in non-metric mode and use ft abbrevation
author
izzni
date
Tue, 24 Nov 2020 13:22:23 -0600 (2020-11-24)
parents
37ee61f93124
children
f7318457df4d
line source
///////////////////////////////////////////////////////////////////////////////+ −
/// -*- coding: UTF-8 -*-+ −
///+ −
/// \file Discovery/Inc/ostc.h+ −
/// \brief Hardware specific configuration+ −
/// \author heinrichs weikamp gmbh+ −
/// \date 05-Dec-2014+ −
///+ −
/// $Id$+ −
///////////////////////////////////////////////////////////////////////////////+ −
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh+ −
///+ −
/// This program is free software: you can redistribute it and/or modify+ −
/// it under the terms of the GNU General Public License as published by+ −
/// the Free Software Foundation, either version 3 of the License, or+ −
/// (at your option) any later version.+ −
///+ −
/// This program is distributed in the hope that it will be useful,+ −
/// but WITHOUT ANY WARRANTY; without even the implied warranty of+ −
/// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the+ −
/// GNU General Public License for more details.+ −
///+ −
/// You should have received a copy of the GNU General Public License+ −
/// along with this program. If not, see <http://www.gnu.org/licenses/>.+ −
//////////////////////////////////////////////////////////////////////////////+ −
+ −
/* Define to prevent recursive inclusion -------------------------------------*/+ −
#ifndef OSTC_H+ −
#define OSTC_H+ −
+ −
//#define OSTC_ON_DISCOVERY_HARDWARE+ −
+ −
/* Includes ------------------------------------------------------------------*/+ −
//#include "stm32f4xx_hal_conf.h"+ −
#include "stm32f4xx_hal.h"+ −
#include "stm32f4xx_hal_spi.h"+ −
+ −
#ifdef OSTC_ON_DISCOVERY_HARDWARE+ −
#include "ostc_discovery.h"+ −
#else+ −
#include "ostc_hw2.h"+ −
// #include "ostc_hw1.h"+ −
#endif+ −
+ −
#define SDRAM_TIMEOUT ((uint32_t)0xFFFF)+ −
#define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_16+ −
#define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_3+ −
#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)+ −
#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)+ −
#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)+ −
#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)+ −
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)+ −
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)+ −
#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)+ −
#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)+ −
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)+ −
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)+ −
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)+ −
+ −
/* Exported variables --------------------------------------------------------*/+ −
+ −
extern SPI_HandleTypeDef hspiDisplay;+ −
extern SPI_HandleTypeDef cpu2DmaSpi;+ −
+ −
extern UART_HandleTypeDef UartHandle;+ −
extern __IO ITStatus UartReady;+ −
+ −
+ −
#ifdef USART_IR_HUD+ −
extern UART_HandleTypeDef UartIR_HUD_Handle;+ −
#endif+ −
+ −
#ifdef USART_PIEZO+ −
extern UART_HandleTypeDef UartPiezoTxHandle;+ −
#endif+ −
+ −
/* Exported functions --------------------------------------------------------*/+ −
+ −
void MX_SPI_Init(void);+ −
void MX_GPIO_Init(void);+ −
void MX_UART_Init(void);+ −
uint8_t MX_UART_ButtonAdjust(uint8_t *array);+ −
+ −
void MX_SmallCPU_Reset_To_Boot(void);+ −
void MX_SmallCPU_Reset_To_Standard(void);+ −
void MX_SmallCPU_NO_Reset_Helper(void);+ −
+ −
void MX_tell_reset_logik_alles_ok(void);+ −
+ −
void MX_Bluetooth_PowerOn(void);+ −
void MX_Bluetooth_PowerOff(void);+ −
+ −
void MX_GPIO_Backlight_max_static_only_Init(void);+ −
+ −
void MX_GPIO_One_Button_only_Init(void);+ −
GPIO_PinState MX_GPIO_Read_The_One_Button(void);+ −
+ −
void MX_TestPin_High(void);+ −
void MX_TestPin_Low(void);+ −
+ −
+ −
#endif // OSTC_H+ −