view Discovery/Src/tComm.c @ 185:1bb24fd3fc92

Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4) Cleanup Compass Wireless
author heinrichsweikamp <bitbucket@heinrichsweikamp.com>
date Fri, 15 Mar 2019 08:22:16 +0000
parents 255eedad4155
children ff59d1d07f9c
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Src/tComm.c
/// \brief  Main file for communication with PC
/// \author heinrichs weikamp gmbh
/// \date   08-Aug-2014
///
/// \details
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

/**
  ==============================================================================
                        ##### How to use #####
  ==============================================================================
    ==============================================================================
              ##### History #####
  ==============================================================================
    160211 added 4 bytes Serial in update Files after pruefsumme prior to binary
    160211 0x6B changed to version only
    160623 fixed 0x72 (in V1.0.9)
    160623 fixed rebuild menu (before update) for V1.0.10

    ==============================================================================
              ##### CTS / RTS #####
  ==============================================================================
    RTS ist immer Output, CTS is immer Input

    BlueMod Pin D7 UART-RTS# ist Output
    geht auf STM32F429 PA11 CTS (Input)
    dito STM32 PA12 RTS geht auf  BlueMod UART-CTS# F3

    siehe BlueMod_SR_HWreference_r06.pdf, Seite 156
    und MAIN_CPU STM32F4 Reference manual DM00031020.pdf, Seite 990


    ==============================================================================
              ##### Codes #####
  ==============================================================================
  [0x73] upload CPU2 firmware in SDRAM and update CPU2

  [0x74] upload MainCPU firmware in EEPROM and start bootloader

    OSTC3 stuff can be found in comm.asm
  */

/* Includes ------------------------------------------------------------------*/

#include "tComm.h"

#include "externCPU2bootloader.h"
#include "externLogbookFlash.h"
#include "gfx_colors.h"
#include "gfx_engine.h"
#include "gfx_fonts.h"
#include "ostc.h"

#ifndef BOOTLOADER_STANDALONE
#	include "base.h"
#	include "tHome.h"
#	include "logbook.h"
#	include "tMenu.h"
#else
#	include "base_bootloader.h"
#	include "firmwareEraseProgram.h"
#endif

#ifdef SPECIALPROGRAMM
#	include "firmwareEraseProgram.h"
#endif

#include <string.h>


/* Private variables ---------------------------------------------------------*/
GFX_DrawCfgScreen	tCscreen;
GFX_DrawCfgWindow	tCwindow;

uint8_t receiveStartByteUart = 0;
uint8_t bluetoothActiveLastTime = 0;

uint8_t StartListeningToUART = 0;
char display_text[256] = { 0 };

uint8_t setForcedBluetoothName = 0;

uint8_t updateSettingsAndMenuOnExit = 0;

/* Private types -------------------------------------------------------------*/
#define BYTE_DOWNLOAD_MODE	(0xBB)
#define BYTE_SERVICE_MODE		(0xAA)

const uint8_t id_Region1_firmware = 0xFF;
const uint8_t id_RTE = 0xFE;
const uint8_t id_FONT = 0x10;
const uint8_t id_FONT_OLD = 0x00;

/* Private function prototypes -----------------------------------------------*/

static void tComm_Error_Handler(void);
static uint8_t select_mode(uint8_t aRxByte);
uint8_t receive_update_flex(uint8_t isRTEupdateALLOWED);
uint8_t receive_update_data_flex(uint8_t* pBuffer1, uint8_t* pBuffer2, uint8_t RTEupdateALLOWED);
uint8_t receive_update_data_mainCPU_firmware(void);
uint8_t receive_update_data_mainCPU_variable_firmware(void);
uint8_t receive_update_data_mainCPU_firmware_subrotuine(uint8_t region, uint8_t* pBuffer1, uint8_t* pBuffer2);
HAL_StatusTypeDef receive_uart_large_size(UART_HandleTypeDef *huart, uint8_t *pData, uint32_t Size);
static uint8_t openComm(uint8_t aRxByte);
uint8_t HW_Set_Bluetooth_Name(uint16_t serial, uint8_t withEscapeSequence);
uint8_t prompt4D4C(uint8_t mode);

#ifdef BOOTLOADER_STANDALONE
    static uint8_t receive_update_data_cpu2(void);
    uint8_t receive_update_data_cpu2_sub(uint8_t* pBuffer);
#endif

/* Exported functions --------------------------------------------------------*/

void tComm_init(void)
{
    tCscreen.FBStartAdress = 0;
    tCscreen.ImageHeight = 480;
    tCscreen.ImageWidth = 800;
    tCscreen.LayerIndex = 1;

    tCwindow.Image = &tCscreen;
    tCwindow.WindowNumberOfTextLines = 6;
    tCwindow.WindowLineSpacing = 65;
    tCwindow.WindowTab = 400;
    tCwindow.WindowX0 = 20;
    tCwindow.WindowX1 = 779;
    tCwindow.WindowY0 = 0;
    tCwindow.WindowY1 = 799;

    StartListeningToUART = 1;

/*	WHY?
#ifdef 	BLE_NENABLE_PIN
    HAL_GPIO_WritePin(BLE_NENABLE_GPIO_PORT,BLE_NENABLE_PIN,GPIO_PIN_RESET);
#endif
*/
}

uint8_t tComm_control(void)
{
    uint8_t answer  = 0;
#ifndef BOOTLOADER_STANDALONE

    /* should do something like reset UART ... */
    if(	settingsGetPointer()->bluetoothActive == 0)
    {
        if(bluetoothActiveLastTime)
        {
            HAL_UART_DeInit(&UartHandle);
            HAL_Delay(1);
            HAL_UART_Init(&UartHandle);
            HAL_Delay(1);
            UartReady = RESET;
            StartListeningToUART = 1;
            bluetoothActiveLastTime = 0;
            receiveStartByteUart = 0;
        }
        return 0;
    }
    else
    {
        bluetoothActiveLastTime = 1;
    }

#endif

    /*##-2- Put UART peripheral in reception process ###########################*/

    if((UartReady == RESET) && StartListeningToUART)
    {
            StartListeningToUART = 0;
            if(HAL_UART_Receive_IT(&UartHandle, &receiveStartByteUart, 1) != HAL_OK)
                    tComm_Error_Handler();
    }
    /* Reset transmission flag */
    if(UartReady == SET)
    {
            UartReady = RESET;
            if((receiveStartByteUart == BYTE_DOWNLOAD_MODE) || (receiveStartByteUart == BYTE_SERVICE_MODE))
                answer = openComm(receiveStartByteUart);
            StartListeningToUART = 1;
            return answer;
    }
    return 0;
}


void tComm_refresh(void)
{
    if(tCscreen.FBStartAdress == 0)
    {
        GFX_hwBackgroundOn();
        tCscreen.FBStartAdress = getFrame(18);
        write_content_simple(&tCscreen, 0, 800, 480-24, &FontT24,"Exit",CLUT_ButtonSurfaceScreen);
        if(receiveStartByteUart == BYTE_SERVICE_MODE)
            GFX_write_string(&FontT48, &tCwindow, "Service mode enabled",2);
        else
            GFX_write_string(&FontT48, &tCwindow, "Download mode enabled",2);
        GFX_SetFramesTopBottom(tCscreen.FBStartAdress, 0,480);
        display_text[0] = 0;
        display_text[255] = 0;
    }
    else if(display_text[255])
    {
      display_text[display_text[255]] = 0;
        releaseFrame(18,tCscreen.FBStartAdress);
        tCscreen.FBStartAdress = getFrame(18);
        write_content_simple(&tCscreen, 0, 800, 480-24, &FontT24,"Exit",CLUT_ButtonSurfaceScreen);
        GFX_write_string(&FontT48, &tCwindow, display_text,2);
        GFX_SetFrameTop(tCscreen.FBStartAdress);
        display_text[0] = 0;
        display_text[255] = 0;
    }
}


void tComm_verlauf(uint8_t percentage_complete)
{
    uint32_t pDestination;

    pDestination = (uint32_t)tCscreen.FBStartAdress;
    pDestination += 150 * tCscreen.ImageHeight * 2;
    pDestination += 100 * 2;

    if(percentage_complete > 100)
        percentage_complete = 100;

    int i = 1;
    while(i<=percentage_complete)
    {
        i += 1;
        for(int y=0;y<4;y++)
        {
            for(int x=0;x<40;x++)
            {
                *(__IO uint16_t*)pDestination = 0xFF00 + 00;
                    pDestination += 2;
            }
            pDestination += (tCscreen.ImageHeight  - 40 )* 2;
        }
        pDestination += tCscreen.ImageHeight * 2; // one spare line
    }
}


void tComm_exit(void)
{
    SStateList status;
    get_globalStateList(&status);

    releaseFrame(18,tCscreen.FBStartAdress);
    tCscreen.FBStartAdress = 0;
    GFX_hwBackgroundOff();

    if(setForcedBluetoothName)
    {
        setForcedBluetoothName = 0;
        MX_Bluetooth_PowerOff();
        HAL_Delay(1000);
        MX_Bluetooth_PowerOn();
        tComm_Set_Bluetooth_Name(1);
    }
#ifndef BOOTLOADER_STANDALONE
    if(updateSettingsAndMenuOnExit)
    {
        check_and_correct_settings();
        createDiveSettings();
        tM_rebuild_menu_after_tComm();
    }
#endif
    updateSettingsAndMenuOnExit = 0;

    if(status.base == BaseComm)
    {
#ifndef BOOTLOADER_STANDALONE
    set_globalState_tHome();
#else
    set_globalState_Base();
#endif
    }
}


uint8_t tComm_Set_Bluetooth_Name(uint8_t force)
{
    uint8_t answer = 0;

    if(hardwareDataGetPointer()->secondarySerial != 0xFFFF)
    {
        if(force || (hardwareDataGetPointer()->secondary_bluetooth_name_set == 0xFF))
            answer = HW_Set_Bluetooth_Name(hardwareDataGetPointer()->secondarySerial, 0);
#ifdef BOOTLOADER_STANDALONE
            if(answer == HAL_OK)
                hardware_programmSecondaryBluetoothNameSet();
#endif
    }
    else
    if(hardwareDataGetPointer()->primarySerial != 0xFFFF)
    {
        if(force || (hardwareDataGetPointer()->production_bluetooth_name_set == 0xFF))
            answer = HW_Set_Bluetooth_Name(hardwareDataGetPointer()->primarySerial, 0);
#ifdef BOOTLOADER_STANDALONE
            if(answer == HAL_OK)
                hardware_programmPrimaryBluetoothNameSet();
#endif
    }
    return answer;
}


uint8_t HW_Set_Bluetooth_Name(uint16_t serial, uint8_t withEscapeSequence)
{
    uint8_t answer = HAL_OK;
    uint8_t aRxBuffer[50];

//	char aTxFactoryDefaults[50] = "AT&F1\r";

    char aTxBufferEscapeSequence[50] = "+++";
    // limit is 19 chars, with 7 chars shown in BLE advertising mode
    //________________________123456789012345678901
    char aTxBufferName[50] = "AT+BNAME=OSTC4-12345\r";
    char answerOkay[6] = "\r\nOKr\n";

    gfx_number_to_string(5,1,&aTxBufferName[15],serial);

    // store active configuration in non-volatile memory
    char aTxBufferWrite[50] = "AT&W\r";

//	char aTxBufferReset[50] = "AT+RESET\r";


    HAL_Delay(1010);
    if(withEscapeSequence)
    {
        aRxBuffer[0] = 0;
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferEscapeSequence, 3, 2000)!= HAL_OK)
            answer = HAL_ERROR;
        HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 3, 2000);
        HAL_Delay(1010);

        for(int i=0;i<3;i++)
        if(aRxBuffer[i] != '+')
            answer = HAL_ERROR;
    }

    aRxBuffer[0] = 0;
    if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferName, 21, 2000)!= HAL_OK)
        answer = HAL_ERROR;
    HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 21+6, 2000);

    for(int i=0;i<21;i++)
    if(aRxBuffer[i] != aTxBufferName[i])
        answer = HAL_ERROR;

    for(int i=0;i<6;i++)
    if(aRxBuffer[21+i] != answerOkay[i])
        answer = HAL_ERROR;

    HAL_Delay(200);

    if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBufferWrite, 5, 2000)!= HAL_OK)
        answer = HAL_ERROR;
    HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 5+6, 2000);

    for(int i=0;i<5;i++)
    if(aRxBuffer[i] != aTxBufferWrite[i])
        answer = HAL_ERROR;

    for(int i=0;i<6;i++)
    if(aRxBuffer[5+i] != answerOkay[i])
        answer = HAL_ERROR;

    answer = HAL_OK;
    return answer;
}


uint8_t openComm(uint8_t aRxByte)
{
    uint8_t answer = 0;
    uint8_t service_mode_last_three_bytes[3];
    uint8_t service_mode_response[5] =
    {
        0x4B,
        0xAB,
        0xCD,
        0xEF,
        0x4C
    };
    uint8_t download_mode_response[2] =
    {
        0xBB,
        0x4D
    };

    if((aRxByte != BYTE_DOWNLOAD_MODE) && (aRxByte != BYTE_SERVICE_MODE))
        return 0;

    set_globalState(StUART_STANDARD);

    /* service mode is four bytes
    0xAA 0xAB 0xCD 0xEF
    answer is
    */

    if(aRxByte == BYTE_SERVICE_MODE)
    {
        if((HAL_UART_Receive(&UartHandle, (uint8_t*)service_mode_last_three_bytes, 3, 2000)!= HAL_OK))
            answer = 0x00;
        else
        {
            if((service_mode_last_three_bytes[0] != 0xAB) || (service_mode_last_three_bytes[1] != 0xCD) || (service_mode_last_three_bytes[2] != 0xEF))
                answer = 0x00;
            else
            {
                if(HAL_UART_Transmit(&UartHandle, (uint8_t*)service_mode_response, 5, 2000)!= HAL_OK)
                    answer = 0x00;
                else
                    answer = prompt4D4C(receiveStartByteUart);
            }
        }
    }
    else	//if(aRxByte == BYTE_SERVICE_MODE)
    {
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)download_mode_response, 2, 2000)!= HAL_OK)
            answer = 0x00;
        else
            answer = prompt4D4C(receiveStartByteUart);
    }
/*
uint8_t debug[256] = {0};
uint8_t dbgptr = 0;
debug[dbgptr++] = aRxByte;
*/
    while((answer == prompt4D4C(receiveStartByteUart)) && (HAL_UART_Receive(&UartHandle, (uint8_t*)&aRxByte, 1, 120000)== HAL_OK))
    {
//		debug[dbgptr++] = aRxByte;
        answer = select_mode(aRxByte);
    }
    set_returnFromComm();
    return 1;
}


uint8_t prompt4D4C(uint8_t mode)
{
    if(mode == BYTE_SERVICE_MODE)
        return 0x4C;
    else
        return 0x4D;
}


uint8_t select_mode(uint8_t type)
{
#ifndef BOOTLOADER_STANDALONE
    SLogbookHeader logbookHeader;
    SLogbookHeaderOSTC3 * plogbookHeaderOSTC3;
    SLogbookHeaderOSTC3compact * plogbookHeaderOSTC3compact;
    uint32_t sampleTotalLength;
    SSettings* pSettings = settingsGetPointer();
    RTC_DateTypeDef sdatestructure;
    RTC_TimeTypeDef stimestructure;
#else
    uint8_t dummyForBootloader[256] = {0};
#endif

    uint8_t count;
    uint8_t aTxBuffer[128];
    uint8_t aRxBuffer[68];
    uint8_t answer;
    aTxBuffer[0] = type;
    aTxBuffer[1] = prompt4D4C(receiveStartByteUart);
    uint8_t tempHigh, tempLow;
    count = 0;

    // service mode only commands
    if(receiveStartByteUart == BYTE_SERVICE_MODE)
    {
        // first part
        switch(type)
        {
        // start communication (again)
        case 0xAA:
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 2, 1000)!= HAL_OK)
                return 0;
            else
                return prompt4D4C(receiveStartByteUart);

/*
        // update firmware main preparation
        case 0x74:
            ext_flash_erase_firmware_if_not_empty();
            break;

        // update firmware main with variable full access memory location preparation
        case 0x76:
            ext_flash_erase_firmware2_if_not_empty();
            break;
*/
        default:
            break;
        }

#ifndef BOOTLOADER_STANDALONE
        uint32_t logCopyDataPtr = 0;
        convert_Type logCopyDataLength;
        uint32_t logCopyDataPtrTemp = 0;
        uint32_t logCopyDataLengthTemp = 0;
        uint8_t logDummyByte = 0;
        uint8_t logStepBackwards = 0;
        convert16_Type totalDiveCount;
        logCopyDataLength.u32bit = 0;
        totalDiveCount.u16bit = 0;
#endif

        // Exit communication on Text like RING, CONNECT, ... or 0xFF command
        if((type < 0x60) || (type == 0xFF))
            return 0;

        // return of command for (almost) all commands
        switch(type)
        {
        // not supported yet case 0x20: // 	send hi:lo:temp1 bytes starting from ext_flash_address:3
        // not supported yet case 0x22: // 	Resets all logbook pointers and the logbook (!)
        // not supported yet case 0x23: // 	Resets battery gauge registers
        // not supported yet case 0x30: // 	write bytes starting from ext_flash_address:3 (Stop when timeout)
        // not supported yet case 0x40: // 	erases 4kB block from ext_flash_address:3 (Warning: No confirmation or built-in security here...)
        // not supported yet case 0x42: // 	erases range in 4kB steps (Get 3 bytes address and 1byte amount of 4kB blocks)
        // not supported yet case 0x50: // 	sends firmware from external flash from 0x3E0000 to 0x3FD000 (118784bytes) via comm
        case 0xFE: // hw unit_tests
        case 0x71: // hw read manufacturing data
        case 0x73: // hw update FLEX
        case 0x79: // hw read device data
#ifdef BOOTLOADER_STANDALONE
        case 0x74: // hw update Firmware
        case 0x75: // hw update RTE
        case 0x76: // hw update Fonts
        case 0x80: // hw write manufacturing data
        case 0x81: // hw write second serial
        case 0x82: // hw set bluetooth name
#else
        case 0x83: // hw copy logbook entry - read
        case 0x84: // hw copy logbook entry - write
        case 0x85: // hw read entire logbook memory
        case 0x86: // hw overwrite entire logbook memory
        case 0x87: // hw ext_flash_repair_SPECIAL_dive_numbers_starting_count_with memory(x)

#endif
        case 0xC1: // 	Start low-level bootloader
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1, 1000)!= HAL_OK)
                return 0;
            break;
        default:
            break;
        }

        // now send content or update firmware
        switch(type)
        {
        case 0xFE:
            // work to do :-)  12. Oct. 2015
            // 256 bytes output
            memset(aTxBuffer,0,128);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK)
                return 0;
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK)
                return 0;
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            break;

        case 0x71:
            memcpy(aTxBuffer,hardwareDataGetPointer(),64);
            count += 64;
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            break;

        case 0x73:
#ifndef BOOTLOADER_STANDALONE
            answer = receive_update_flex(1);
#else
            answer = receive_update_flex(0);
#endif
            if(answer == 0)
                return 0;
            else if(answer == 2) // 2 = RTE without bootToBootloader
            {
                aTxBuffer[0] = 0xFF;
                HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000);
                return 0;
            }
            else
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
                if(answer == 1) /* 0xFF is checksum error, 2 = RTE without bootToBootloader */
                {
                    extern	uint8_t bootToBootloader;
                    bootToBootloader = 1;
                }
            }
            break;

        case 0x79:
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000)!= HAL_OK)
                return 0;
            ext_flash_read_fixed_16_devicedata_blocks_formated_128byte_total(aTxBuffer);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK)
                return 0;
            aTxBuffer[0] = prompt4D4C(receiveStartByteUart);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1,10000)!= HAL_OK)
                return 0;
            else
                return prompt4D4C(receiveStartByteUart);

        case 0x82:
#ifdef BOOTLOADER_STANDALONE
            setForcedBluetoothName = 1;
            return 0;
#else
        settingsGetPointer()->debugModeOnStart = 1;
        extern	uint8_t bootToBootloader;
        bootToBootloader = 1;
        return prompt4D4C(receiveStartByteUart);
#endif

#ifdef BOOTLOADER_STANDALONE
        case 0x74:
            answer = receive_update_data_mainCPU_firmware();
            if(answer != 0)
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
                if(answer == 1) // 0xFF is checksum error
                {
                    extern	uint8_t bootToBootloader;
                    bootToBootloader = 1;
                }
            }
            else
                return 0;
            break;

        case 0x75:
            receive_update_data_cpu2();
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            break;

        case 0x76:
            answer = receive_update_data_mainCPU_variable_firmware();
            if(answer != 0)
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
                if(answer == 1) // 0xFF is checksum error
                {
                    extern	uint8_t bootToBootloader;
                    bootToBootloader = 1;
                }
            }
            else
                return 0;
            break;

        case 0x80:
            if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  52, 5000)!= HAL_OK)
                return 0;
            if(hardware_programmProductionData(aRxBuffer) == HAL_OK)
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            }
            else
                return 0;
            break;

        case 0x81:
            if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  12, 1000)!= HAL_OK)
                return 0;
            if(hardware_programmSecondarySerial(aRxBuffer) == HAL_OK)
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            }
            else
                return 0;
            break;

#else

#ifdef SPECIALPROGRAMM
        case 0x80:
            if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  52, 5000)!= HAL_OK)
                return 0;
            if(hardware_programmProductionData(aRxBuffer) == HAL_OK)
            {
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            }
            else
                return 0;
            break;
#endif
        case 0x83:
            if(HAL_UART_Receive(&UartHandle, &logStepBackwards,  1, 1000)!= HAL_OK)
                return 0;
            logCopyDataPtr = getFrame(98);
            logCopyDataPtrTemp = logCopyDataPtr;
            logCopyDataLength.u32bit = ext_flash_read_dive_raw_with_double_header_1K((uint8_t *)logCopyDataPtr, 1000000,logStepBackwards);
            answer = HAL_OK;
            if(answer == HAL_OK)
                answer  = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteLow), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteMidLow), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteMidHigh), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Transmit(&UartHandle, &(logCopyDataLength.u8bit.byteHigh), 1,2000);
            logCopyDataLengthTemp = logCopyDataLength.u32bit;
            while((logCopyDataLengthTemp >= 0xFFFF) && (answer == HAL_OK))
            {
                answer  = HAL_UART_Transmit(&UartHandle, (uint8_t *)logCopyDataPtrTemp, 0xFFFF,30000);
                logCopyDataLengthTemp -= 0xFFFF;
                logCopyDataPtrTemp += 0xFFFF;
            }
            if((logCopyDataLengthTemp > 0) && (answer == HAL_OK))
                answer  = HAL_UART_Transmit(&UartHandle, (uint8_t *)logCopyDataPtrTemp, (uint16_t)logCopyDataLengthTemp,30000);
            releaseFrame(98,logCopyDataPtr);
            if(answer == HAL_OK)
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            else
                return 0;
            break;

        case 0x84:
            logCopyDataPtr = getFrame(98);
            logCopyDataPtrTemp = logCopyDataPtr;
            answer = HAL_OK;
            if(answer == HAL_OK)
                    answer  = HAL_UART_Receive(&UartHandle, &logDummyByte, 1,2000);
            if(answer == HAL_OK)
                    answer  = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteLow), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteMidLow), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteMidHigh), 1,2000);
            if(answer == HAL_OK)
                answer  = HAL_UART_Receive(&UartHandle, &(logCopyDataLength.u8bit.byteHigh), 1,2000);
            logCopyDataLengthTemp = logCopyDataLength.u32bit;
            while((logCopyDataLengthTemp >= 0xFFFF) && (answer == HAL_OK))
            {
                answer  = HAL_UART_Receive(&UartHandle, (uint8_t *)logCopyDataPtrTemp, 0xFFFF,30000);
                logCopyDataLengthTemp -= 0xFFFF;
                logCopyDataPtrTemp += 0xFFFF;
            }
            if((logCopyDataLengthTemp > 0) && (answer == HAL_OK))
                answer  = HAL_UART_Receive(&UartHandle, (uint8_t *)logCopyDataPtrTemp, (uint16_t)logCopyDataLengthTemp,30000);
            if(answer == HAL_OK)
                ext_flash_write_dive_raw_with_double_header_1K((uint8_t *)logCopyDataPtr, logCopyDataLength.u32bit);
            releaseFrame(98,logCopyDataPtr);
            if(answer == HAL_OK)
                aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            else
                return 0;
            break;

        case 0x85:
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            logCopyDataPtr = getFrame(98);
            ext_flash_read_header_memory((uint8_t *)logCopyDataPtr);
            for(int i=0;i<8;i++)
                HAL_UART_Transmit(&UartHandle, (uint8_t *)(logCopyDataPtr + (0x8000 * i)), (uint16_t)0x8000,60000);
            releaseFrame(98,logCopyDataPtr);
            break;

        case 0x86:
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            logCopyDataPtr = getFrame(98);
            for(int i=0;i<8;i++)
                HAL_UART_Receive(&UartHandle, (uint8_t *)(logCopyDataPtr + (0x8000 * i)), (uint16_t)0x8000,60000);
            ext_flash_write_header_memory((uint8_t *)logCopyDataPtr);
            releaseFrame(98,logCopyDataPtr);
            break;

        case 0x87:
            if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  4, 1000)!= HAL_OK)
                return 0;
            if(((aRxBuffer[0] ^ aRxBuffer[2]) != 0xFF) || ((aRxBuffer[1] ^ aRxBuffer[3]) != 0xFF))
                return 0;
            totalDiveCount.u8bit.byteLow  = aRxBuffer[1];
            totalDiveCount.u8bit.byteHigh = aRxBuffer[0];
            ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(totalDiveCount.u16bit);
            aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
            break;
#endif
        }

        // was service command? Yes, finish and exit
        if(count)
        {
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, count,10000)!= HAL_OK)
                return 0;
            else
                return prompt4D4C(receiveStartByteUart);
        }
    }


    // download mode commands
    switch(type)
    {
    // return of command for almost all commands
    case 0x60: // get model + features
    case 0x61: // get all headers full (256 bytes)
    case 0x62: // set clock
    case 0x63: // set custom text
    case 0x66: // get dive profile
    case 0x69: // get serial, old version numbering, custom text
    case 0x6A: // get model
    case 0x6B: // get specific firmware version
    case 0x6D: // get all compact headers (16 byte)
    case 0x6E: // display text
    case 0x70: // read min, default, max setting
    case 0x72: // read setting
    case 0x77: // write setting
    case 0x78: // reset all settings
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 1, 1000)!= HAL_OK)
            return 0;
        break;

    // start communication (again)
    case 0xBB:
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 2, 1000)!= HAL_OK)
            return 0;
        else
            return prompt4D4C(receiveStartByteUart);

    // stop communication
    case 0xFF:
        HAL_UART_Transmit(&UartHandle, (uint8_t*)&aTxBuffer, 1, 1000);
        return 0;

    default:
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart); // hw 160712
        break;
    }

    switch(type)
    {
    case 0x62:
        if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  6, 2000)!= HAL_OK)
            return 0;
        break;
    case 0x63:
        if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 60, 5000)!= HAL_OK)
            return 0;
        break;
    case 0x66:
        if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  1, 1000)!= HAL_OK)
            return 0;
        break;
    case 0x6B:
        if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer,  1, 1000)!= HAL_OK)
            return 0;
        break;
    case 0x6E:
        if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 16, 5000)!= HAL_OK)
            return 0;
        break;
    case 0x77:
  if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 5, 5000)!= HAL_OK)
            return 0;
  break;
    case 0x72:
  if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 5000)!= HAL_OK)
            return 0;
        break;
    case 0x70:
  if(HAL_UART_Receive(&UartHandle, (uint8_t*)aRxBuffer, 1, 5000)!= HAL_OK)
            return 0;
        break;
    }

    switch(type)
    {
    /* common to standard and bootloader */

    // get model + features
    case 0x60:
        aTxBuffer[count++] = 0x00; // hardware descriptor HIGH byte
        aTxBuffer[count++] = 0x3B; // hardware descriptor LOW byte // 0x3B is OSTC4 //  0x1A is OTSC3
        aTxBuffer[count++] = 0x00; // feature descriptor HIGH byte
        aTxBuffer[count++] = 0x00; // feature descriptor LOW byte
        aTxBuffer[count++] = 0x43; // model id
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // get model
    case 0x6A:
        aTxBuffer[count++] = 0x3B; // 0x3B is OSTC4 //  0x1A is OTSC3
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // get all firmware version and status (OSTC4 only)
    case 0x6B:
        switch(*aRxBuffer)
        {
            case 0xFF:
            // firmware
            aTxBuffer[count++] = firmwareDataGetPointer()->versionFirst;
            aTxBuffer[count++] = firmwareDataGetPointer()->versionSecond;
            aTxBuffer[count++] = firmwareDataGetPointer()->versionThird;
            aTxBuffer[count++] = firmwareDataGetPointer()->versionBeta;
            break;
            case 0xFE:
            // RTE
            getActualRTEandFONTversion(&tempHigh, &tempLow, 0, 0); // RTE
            aTxBuffer[count++] = tempHigh;
            aTxBuffer[count++] = tempLow;
            aTxBuffer[count++] = 0;
            aTxBuffer[count++] = 0;
            break;
            case 0x10:
            getActualRTEandFONTversion( 0, 0, &tempHigh, &tempLow); // font
            aTxBuffer[count++] = tempHigh;
            aTxBuffer[count++] = tempLow;
            aTxBuffer[count++] = 0;
            aTxBuffer[count++] = 0;
            break;
            default:
            // not supported
            aTxBuffer[count++] = 0xFF;
            aTxBuffer[count++] = 0xFF;
            aTxBuffer[count++] = 0xFF;
            aTxBuffer[count++] = 0xFF;
            break;
/* Jef Driesen Test
            default:
            // not supported
            aTxBuffer[count++] = 0x1;
            aTxBuffer[count++] = 0x1;
            aTxBuffer[count++] = 0x1;
            aTxBuffer[count++] = 0x1;
            break;
*/
        }
/*
        // serial
        aTxBuffer[count++] = pSettings->serialLow;
        aTxBuffer[count++] = pSettings->serialHigh;
        // batch code (date)
        hardwareBatchCode(&tempHigh, &tempLow);
        aTxBuffer[count++] = tempLow;
        aTxBuffer[count++] = tempHigh;
        // status and status detail (future feature)
        aTxBuffer[count++] = 0;
        aTxBuffer[count++] = 0;
        aTxBuffer[count++] = 0;
        aTxBuffer[count++] = 0;
*/
        // prompt
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // display text
    case 0x6E:
        for(int i=0;i<16;i++)
            display_text[i] = aRxBuffer[i];
        display_text[15] = 0;
        display_text[255] = 16;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // version / identify
    case 0x69:
#ifndef BOOTLOADER_STANDALONE
        aTxBuffer[count++] = pSettings->serialLow;
        aTxBuffer[count++] = pSettings->serialHigh;
        aTxBuffer[count++] = firmwareVersion_16bit_low();
        aTxBuffer[count++] = firmwareVersion_16bit_high();
        memcpy(&aTxBuffer[count], pSettings->customtext, 60);
#else
        aTxBuffer[count++] = 0;//pSettings->serialLow;
        aTxBuffer[count++] = 0;//pSettings->serialHigh;
        aTxBuffer[count++] = 0;//firmwareVersion_16bit_low();
        aTxBuffer[count++] = 0;//firmwareVersion_16bit_high();
        memset(&aTxBuffer[count], 0, 60);
#endif
        count += 60;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

#ifndef BOOTLOADER_STANDALONE
    //Reset all setting
    case 0x78:
        set_settings_to_Standard();
        updateSettingsAndMenuOnExit = 1;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
#endif

#ifndef BOOTLOADER_STANDALONE
    // full headers (256 byte)
    case 0x61:
//			for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) // comment Jef Driesen email 15.09.2015 and 3.3.2016
        for(int StepBackwards = 255; StepBackwards > -1; StepBackwards--)
        {
            logbook_getHeader(StepBackwards, &logbookHeader);
            plogbookHeaderOSTC3 = logbook_build_ostc3header(&logbookHeader);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3, 256,5000)!= HAL_OK)
                return 0;
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

        // compact headers (16 byte)
    case 0x6D:
//			for(int StepBackwards = 0;StepBackwards<256;StepBackwards++) // comment Jef Driesen email 15.09.2015 and 3.3.2016
        for(int StepBackwards = 255; StepBackwards > -1; StepBackwards--)
        {
            logbook_getHeader(StepBackwards, &logbookHeader);
            plogbookHeaderOSTC3compact = logbook_build_ostc3header_compact(&logbookHeader);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3compact, 16,5000)!= HAL_OK)
                return 0;
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // set clock & date
    case 0x62:
// ToDo
        stimestructure.Hours = aRxBuffer[0];
        stimestructure.Minutes = aRxBuffer[1];
        stimestructure.Seconds = aRxBuffer[2];
        sdatestructure.Month = aRxBuffer[3];
        sdatestructure.Date = aRxBuffer[4];
        sdatestructure.Year = aRxBuffer[5]; // This parameter must be a number between Min_Data = 0 and Max_Data = 99
        setWeekday(&sdatestructure);

        if(		( stimestructure.Hours 		< 24 )
                &&(	stimestructure.Minutes 	< 60 )
                &&(	stimestructure.Seconds 	< 60 )
                &&(	sdatestructure.Month 		< 13 )
                &&(	sdatestructure.Date 		< 32 )
                &&(	sdatestructure.Year 		< 100 ))
        {
            setTime(stimestructure);
            setDate(sdatestructure);
            set_globalState(StUART_RTECONNECT);
            HAL_Delay(1);
            set_globalState(StUART_STANDARD);
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    case 0x63:
        for(int i=0;i<60;i++)
            pSettings->customtext[i] = aRxBuffer[i];
        pSettings->customtext[59] = 0;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // get dive profile
    case 0x66:
//			logbook_getHeader(aRxBuffer[0], &logbookHeader); // comment Jef Driesen email 15.09.2015
        logbook_getHeader(255 - aRxBuffer[0], &logbookHeader);
        plogbookHeaderOSTC3 = logbook_build_ostc3header(&logbookHeader);
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)plogbookHeaderOSTC3, 256,5000)!= HAL_OK)
            return 0;
        ext_flash_open_read_sample(255 - aRxBuffer[0], &sampleTotalLength); // comment Jef Driesen email 15.09.2015 about length: changed in externLogbookFlash.c
        while(sampleTotalLength >= 128)
        {
            ext_flash_read_next_sample_part(aTxBuffer,128);
            sampleTotalLength -= 128;
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, 128,5000)!= HAL_OK)
                return 0;
        }
        if(sampleTotalLength)
        {
            ext_flash_read_next_sample_part(aTxBuffer,sampleTotalLength);
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, sampleTotalLength,5000)!= HAL_OK)
                return 0;
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

        // read min,default,max setting
    case 0x70:
    count += readDataLimits__8and16BitValues_4and7BytesOutput(aRxBuffer[0],&aTxBuffer[count]);
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // read setting
    case 0x72:
        readData(aRxBuffer[0],&aTxBuffer[count]);
        count += 4;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;

    // write setting
    case 0x77:
        writeData(aRxBuffer);
        updateSettingsAndMenuOnExit = 1;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
#else
    /* bootloader dummies */
    // full headers (256 byte)
    case 0x61:
        for(int StepBackwards = 0;StepBackwards<256;StepBackwards++)
        {
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 256,5000)!= HAL_OK)
                return 0;
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // compact headers (16 byte)
    case 0x6D:
        for(int StepBackwards = 0;StepBackwards<256;StepBackwards++)
        {
            if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 16,5000)!= HAL_OK)
                return 0;
        }
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // set clock & date
    case 0x62:
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // set custom text
    case 0x63:
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // get dive profile
    case 0x66:
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)dummyForBootloader, 256,5000)!= HAL_OK)
            return 0;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // read min,default,max setting
    // read settings


    case 0x72:
        memcpy(&aTxBuffer[count], dummyForBootloader, 4);
  count += 4;
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
    // write settings
    case 0x77:
        aTxBuffer[count++] = prompt4D4C(receiveStartByteUart);
        break;
#endif
    }

    if(count)
    {
        if(HAL_UART_Transmit(&UartHandle, (uint8_t*)aTxBuffer, count,10000)!= HAL_OK)
            return 0;
        else
            return prompt4D4C(receiveStartByteUart);
    }
    return 0;
}


HAL_StatusTypeDef receive_uart_large_size(UART_HandleTypeDef *huart, uint8_t *pData, uint32_t Size)
{
    uint16_t length_16_blocks;
    uint16_t length_16_remainder;
    uint32_t temp;
    HAL_StatusTypeDef result = HAL_OK;
    uint32_t pDataLocal;

    length_16_blocks = (uint16_t) (Size / 0xFFFF);
    temp = length_16_blocks;
    temp *= 0xFFFF;
    length_16_remainder = (uint16_t) ( Size - temp);

    pDataLocal = (uint32_t)pData;

    while((result == HAL_OK) && length_16_blocks)
    {
        result = HAL_UART_Receive(&UartHandle, (uint8_t *)pDataLocal, 0xFFFF , 60000);
        pDataLocal += 0xFFFF;
        length_16_blocks--;
    }
    if((result == HAL_OK) && length_16_remainder)
    {
        result = HAL_UART_Receive(&UartHandle, (uint8_t *)pDataLocal, length_16_remainder , 60000);
    }
    return result;
}


/* for safety reason (memory blocking this code is main and sub */

#ifdef BOOTLOADER_STANDALONE

uint8_t receive_update_data_cpu2(void)
{
    uint8_t answer;

    uint8_t* pBuffer = (uint8_t*)getFrame(20);
    answer = receive_update_data_cpu2_sub(pBuffer);
    releaseFrame(20,(uint32_t)pBuffer);
    return answer;
}


uint8_t receive_update_data_cpu2_sub(uint8_t* pBuffer)
{
    uint8_t sBuffer[10];
    uint32_t length, offsetTotal, pruefsumme, pruefsummeCalc;
    uint8_t id;
    const uint8_t id_RTE = 0xFE;

    //Get length
    if(HAL_UART_Receive(&UartHandle, pBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    length = 256  * 256 * 256 * (uint32_t)pBuffer[0] +  256 * 256 * (uint32_t)pBuffer[1] + 256 * (uint32_t)pBuffer[2] + pBuffer[3];

    //Get id
    if(HAL_UART_Receive(&UartHandle, pBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    id = pBuffer[0];
    offsetTotal = 256  * 256 * 256 * (uint32_t)pBuffer[0] +  256 * 256 * (uint32_t)pBuffer[1] + 256 * (uint32_t)pBuffer[2] + pBuffer[3];

    // get pruefsumme, bytes are in different order on Dev C++ code!!!
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    pruefsumme = 256  * 256 * 256 * (uint32_t)sBuffer[3] +  256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0];
    pruefsummeCalc = length + offsetTotal;

    // no need to get code if pruefsumme == length is wrong
    if(pruefsummeCalc != pruefsumme)
    {
        return 0;
    }

    //get Code
    if(receive_uart_large_size(&UartHandle, pBuffer, length)!= HAL_OK)
    {
        return 0;
    }

    //get Checksum
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 580000
    {
        return 0;
    }
    uint32_t checksum = 256  * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 *  (uint32_t)sBuffer[1] + 256 *  (uint32_t)sBuffer[2] + sBuffer[3];
//  uint32_t checksumCalc = crc32c_checksum(pBuffer, length,0,0);
    uint32_t checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer, length/4);

    if(checksum !=  checksumCalc)
    {
        return 0;
    }

    if(id != id_RTE)
    {
        strcpy(display_text,"wrong data.");
        display_text[255] = 32;
        return 0;
    }

    strcpy(display_text,"  RTE update.");
    display_text[255] = 32;

    return extCPU2bootloader(pBuffer,length,display_text);
}
#endif // BOOTLOADER_STANDALONE



uint8_t receive_update_flex(uint8_t isRTEupdateALLOWED)
{
    uint8_t answer;

    uint8_t* pBuffer1 = (uint8_t*)getFrame(20);
    uint8_t* pBuffer2 = (uint8_t*)getFrame(20);

    answer = receive_update_data_flex(pBuffer1, pBuffer2, isRTEupdateALLOWED);

    releaseFrame(20,(uint32_t)pBuffer1);
    releaseFrame(20,(uint32_t)pBuffer2);

    return answer;
}

uint8_t receive_update_data_mainCPU_firmware(void)
{
    uint8_t answer;

    uint8_t* pBuffer1 = (uint8_t*)getFrame(20);

    answer = receive_update_data_mainCPU_firmware_subrotuine(1, pBuffer1, 0);

    releaseFrame(20,(uint32_t)pBuffer1);

    return answer;
}

/* multi buffer (long data) not tested yet */
uint8_t receive_update_data_mainCPU_variable_firmware(void)
{
    uint8_t answer;

    uint8_t* pBuffer1 = (uint8_t*)getFrame(20);
    uint8_t* pBuffer2 = (uint8_t*)getFrame(20);

    answer = receive_update_data_mainCPU_firmware_subrotuine(2, pBuffer1, pBuffer2);

    releaseFrame(20,(uint32_t)pBuffer1);
    releaseFrame(20,(uint32_t)pBuffer2);

    return answer;
}

uint8_t receive_update_data_flex(uint8_t* pBuffer1, uint8_t* pBuffer2, uint8_t RTEupdateALLOWED)
{
    uint8_t sBuffer[10];
    uint8_t serialBuffer[10];
    uint32_t length1, length2, lengthCompare, offsetCompare, ByteCompareStatus;
    uint32_t lengthTotal, offsetTotal, pruefsumme, pruefsummeCalc;
    uint32_t checksum, checksumCalc = 0;
    uint8_t id;
    const uint8_t id_Region1_firmware = 0xFF;
    const uint8_t id_RTE = 0xFE;
    uint8_t textpointer = 0;

    //Get length
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    lengthTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];

    //Get offset and/or id (id is 0xFF for RTE, 0xFE for firmware and offset if var)
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    id = sBuffer[0];

    pruefsummeCalc = 256 * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];
    pruefsummeCalc += lengthTotal;
    //alt, geht nicht mehr wegen Font: pruefsummeCalc = lengthTotal + offsetTotal;

    if((id != id_Region1_firmware) && (id != id_RTE) && (id != id_FONT) && (id != id_FONT_OLD))
    {
        return 0;
    }

    // neu 110212
    if(id == id_FONT)
        offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[1] +  256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[3];
    else
        offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];

    // get pruefsumme, bytes are in different order on Dev C++ code!!!
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
    {
        return 0;
    }
    pruefsumme = 256 * 256 * 256 * (uint32_t)sBuffer[3] +  256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0];


    if(pruefsummeCalc != pruefsumme)
    {
        uint8_t ptr = 0;
        strcpy(&display_text[ptr]," checksum error");
        ptr += 15;
        strcpy(&display_text[ptr],"\n\r");
        ptr += 2;
        ptr += gfx_number_to_string(10,0,&display_text[ptr],checksumCalc);
        display_text[ptr] = 0;
        display_text[255] = ptr + 1;
        return 0xFF;
    }

    //Get serial (new since 160211)
    if(HAL_UART_Receive(&UartHandle, serialBuffer, 4,5000)!= HAL_OK)
    {
        return 0;
    }

    if(lengthTotal > 768000)
    {
        length1 = 768000;
        length2 = lengthTotal - length1;
    }
    else
    {
        length1 = lengthTotal;
        length2 = 0;
    }

    if((pBuffer2 == 0) && (length2 != 0))
        return 0;

    //get Code
    if(receive_uart_large_size(&UartHandle, pBuffer1, length1)!= HAL_OK)
        return 0;

    if(length2)
        if(receive_uart_large_size(&UartHandle, pBuffer2, length2)!= HAL_OK)
            return 0;

    //get Checksum
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
        return 0;

    checksum = 256  * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 *  (uint32_t)sBuffer[1] + 256 *  (uint32_t)sBuffer[2] + sBuffer[3];
//  uint32_t checksumCalc = crc32c_checksum(pBuffer1, length1, pBuffer2, length2);
    if(length2)
        checksumCalc = CRC_CalcBlockCRC_moreThan768000((uint32_t*)pBuffer1, (uint32_t*)pBuffer2, lengthTotal/4);
    else
        checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer1, length1/4);

    /* check id now */
    /*
    if(region == 2)
    {
        if((id == id_Region1_firmware) || (id == id_RTE))
        {
            strcpy(display_text,"wrong data.");
            display_text[255] = 32;
            return 0;
        }
    }
    else
    {
        if(id != id_Region1_firmware)
        {
            strcpy(display_text,"wrong data.");
            display_text[255] = 32;
            return 0;
        }
    }
    */
    /* test checksum */
    if(checksum !=  checksumCalc)
    {
        uint8_t ptr = 0;
        strcpy(&display_text[ptr]," pruefsummen error");
        ptr += 15;
        strcpy(&display_text[ptr],"\n\r");
        display_text[ptr] = 0;
        display_text[255] = ptr + 1;
        return 0xFF;
    }

    if(id == id_Region1_firmware)
    {
        uint8_t ptr = 0;
        display_text[ptr++] = 'V';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10000] & 0x1F);
        display_text[ptr++] = '.';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10001] & 0x1F);
        display_text[ptr++] = '.';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10002] & 0x1F);
        display_text[ptr++] = ' ';
        if(pBuffer1[0x10003])
        {
            strcpy(&display_text[ptr],"beta ");
            ptr +=5;
        }
        strcpy(&display_text[ptr],"\n\rpreparing for install.");
        ptr += 25; // circa ungef�hr
        display_text[255] = ptr + 1;
    }
    else if(id == id_RTE)
    {
        if(RTEupdateALLOWED)
        {
            strcpy(display_text,"  RTE update.\n\r");
            textpointer = 0;
            while((display_text[textpointer] != 0) && (textpointer < 50))
                textpointer++;
#ifndef BOOTLOADER_STANDALONE
            if(textpointer < 50)
            {
//				display_text[textpointer++] =
                display_text[textpointer++] = '\025';
                display_text[textpointer++] = TXT_2BYTE;
                display_text[textpointer++] = TXT2BYTE_DecoDataLost;
                display_text[textpointer] = 0;
            }
#endif
            display_text[255] = textpointer+1;
            return extCPU2bootloader(pBuffer1,length1,display_text);
        }
        else
            return 0xFF;
    }
    else
    //if(region == 2)
    {
        uint8_t ptr = 0;
        ptr += gfx_number_to_string(7,0,&display_text[ptr],lengthTotal);
        strcpy(&display_text[ptr]," bytes with ");
        ptr += 12;
        ptr += gfx_number_to_string(7,0,&display_text[ptr],offsetTotal);
        strcpy(&display_text[ptr]," offset");
        ptr += 7;
        strcpy(&display_text[ptr],"\n\rpreparing for install.");
        ptr += 25; // circa ungef�hr
        display_text[255] = ptr + 1;
    }


    // only non RTE !!
    uint8_t* pBufferCompare = (uint8_t*)getFrame(20);
    ByteCompareStatus = 0;

    if(id == id_Region1_firmware)
    {
        /* standard firmware limited to 768000 */
        if(ext_flash_read_firmware(pBufferCompare,4,0) != 0xFFFFFFFF)
            ext_flash_erase_firmware();
        ext_flash_write_firmware(pBuffer1, length1);
        lengthCompare = ext_flash_read_firmware(pBufferCompare,768000,0);

        if(lengthCompare != length1)
            ByteCompareStatus = 10000;
        for(int i = 0; i < length1; i++)
        {
            if(pBuffer1[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }
    }
    else
    //if(region == 2)
    {
        /* upper region firmware can be larger (1MB) */
        if(ext_flash_read_firmware2(0, pBufferCompare,4, 0,0) != 0xFFFFFFFF)
            ext_flash_erase_firmware2();
        ext_flash_write_firmware2(offsetTotal, pBuffer1, length1, pBuffer2, length2);
        lengthCompare = ext_flash_read_firmware2(&offsetCompare, pBufferCompare,768000, 0,768000);

        if(lengthCompare != length1 + length2)
            ByteCompareStatus = 10000;
        if(offsetTotal != offsetCompare)
            ByteCompareStatus += 20000;
        for(int i = 0; i < length1; i++)
        {
            if(pBuffer1[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }

        lengthCompare = ext_flash_read_firmware2(0, 0,768000, pBufferCompare,768000);
        for(int i = 0; i < length2; i++)
        {
            if(pBuffer2[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }
    }

    releaseFrame(20,(uint32_t)pBufferCompare);

    if(ByteCompareStatus != 0)
    {
        strcpy(&display_text[0],"\n\rcopy error.");
        display_text[255] = 21;
        return 0;
    }
    else
    {
        strcpy(&display_text[0],"\n\rready to install.");
        display_text[255] = 21;
        return 1;
    }
}


uint8_t receive_update_data_mainCPU_firmware_subrotuine(uint8_t region, uint8_t* pBuffer1, uint8_t* pBuffer2)
{
    uint8_t sBuffer[10];
    uint32_t length1, length2, lengthCompare, offsetCompare, ByteCompareStatus;
    uint32_t lengthTotal, offsetTotal, pruefsumme, pruefsummeCalc;
    uint32_t checksum, checksumCalc;
    uint8_t id;

    checksumCalc = 0;

    //Get length
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
        return 0;

    lengthTotal = 256  * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];

    //Get offset and/or id (id is 0xFF for RTE, 0xFE for firmware and offset if var)
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
        return 0;

    id = sBuffer[0];

    pruefsummeCalc = 256 * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];
    pruefsummeCalc += lengthTotal;

    if((id != id_Region1_firmware) && (id != id_RTE) && (id != id_FONT) && (id != id_FONT_OLD))
        return 0;

    if(id == id_FONT)
        offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[1] +  256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[3];
        // alt, prior to id for font
    else
        offsetTotal = 256 * 256 * 256 * (uint32_t)sBuffer[0] +  256 * 256 * (uint32_t)sBuffer[1] + 256 * (uint32_t)sBuffer[2] + sBuffer[3];

    // get pruefsumme, bytes are in different order on Dev C++ code!!!
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
        return 0;

    pruefsumme = 256  * 256 * 256 * (uint32_t)sBuffer[3] +  256 * 256 * (uint32_t)sBuffer[2] + 256 * (uint32_t)sBuffer[1] + sBuffer[0];

    //alt: pruefsummeCalc = lengthTotal + offsetTotal;

    if(pruefsummeCalc != pruefsumme)
    {
        uint8_t ptr = 0;
        strcpy(&display_text[ptr]," checksum error");
        ptr += 15;
        strcpy(&display_text[ptr],"\n\r");
        ptr += 2;
        ptr += gfx_number_to_string(10,0,&display_text[ptr],checksumCalc);
        display_text[ptr] = 0;
        display_text[255] = ptr + 1;
        return 0xFF;
    }

    if(lengthTotal > 768000)
    {
        length1 = 768000;
        length2 = lengthTotal - length1;
    }
    else
    {
        length1 = lengthTotal;
        length2 = 0;
    }

    if((pBuffer2 == 0) && (length2 != 0))
        return 0;

    //get Code
    if(receive_uart_large_size(&UartHandle, pBuffer1, length1)!= HAL_OK)
        return 0;

    if(length2)
        if(receive_uart_large_size(&UartHandle, pBuffer2, length2)!= HAL_OK)
            return 0;

    //get Checksum
    if(HAL_UART_Receive(&UartHandle, sBuffer, 4,5000)!= HAL_OK) // 58000
        return 0;

    checksum = 256  * 256 * 256 *(uint32_t)sBuffer[0] + 256 * 256 *  (uint32_t)sBuffer[1] + 256 *  (uint32_t)sBuffer[2] + sBuffer[3];
//  uint32_t checksumCalc = crc32c_checksum(pBuffer1, length1, pBuffer2, length2);
    if(length2)
        checksumCalc = CRC_CalcBlockCRC_moreThan768000((uint32_t*)pBuffer1, (uint32_t*)pBuffer2, lengthTotal/4);
    else
        checksumCalc = CRC_CalcBlockCRC((uint32_t*)pBuffer1, length1/4);

    /* check id now */
    if(region == 2)
    {
        if((id == id_Region1_firmware) || (id == id_RTE))
        {
            strcpy(display_text,"wrong data.");
            display_text[255] = 32;
            return 0;
        }
    }
    else
    {
        if(id != id_Region1_firmware)
        {
            strcpy(display_text,"wrong data.");
            display_text[255] = 32;
            return 0;
        }
    }

    /* test checksum */
    if(checksum !=  checksumCalc)
    {
        uint8_t ptr = 0;
        strcpy(&display_text[ptr]," pruefsummen error");
        ptr += 15;
        strcpy(&display_text[ptr],"\n\r");
        display_text[ptr] = 0;
        display_text[255] = ptr + 1;
        return 0xFF;
    }

    if(region == 2)
    {
        uint8_t ptr = 0;
        ptr += gfx_number_to_string(7,0,&display_text[ptr],lengthTotal);
        strcpy(&display_text[ptr]," bytes with ");
        ptr += 12;
        ptr += gfx_number_to_string(7,0,&display_text[ptr],offsetTotal);
        strcpy(&display_text[ptr]," offset");
        ptr += 7;
        strcpy(&display_text[ptr],"\n\rpreparing for install.");
        ptr += 25; // circa ungef�hr
        display_text[255] = ptr + 1;

    }
    else
    {
        uint8_t ptr = 0;
        display_text[ptr++] = 'V';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10000] & 0x1F);
        display_text[ptr++] = '.';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10001] & 0x1F);
        display_text[ptr++] = '.';
        ptr += gfx_number_to_string(2,0,&display_text[ptr],pBuffer1[0x10002] & 0x1F);
        display_text[ptr++] = ' ';
        if(pBuffer1[0x10003])
        {
            strcpy(&display_text[ptr],"beta ");
            ptr +=5;
        }
        strcpy(&display_text[ptr],"\n\rpreparing for install.");
        ptr += 25; // circa ungef�hr
        display_text[255] = ptr + 1;
    }

    uint8_t* pBufferCompare = (uint8_t*)getFrame(20);
    ByteCompareStatus = 0;

    if(region == 2)
    {
        /* upper region firmware can be larger (1MB) */
        if(ext_flash_read_firmware2(0, pBufferCompare,4, 0,0) != 0xFFFFFFFF)
            ext_flash_erase_firmware2();
        ext_flash_write_firmware2(offsetTotal, pBuffer1, length1, pBuffer2, length2);
        lengthCompare = ext_flash_read_firmware2(&offsetCompare, pBufferCompare,768000, 0,768000);

        if(lengthCompare != length1 + length2)
            ByteCompareStatus = 10000;
        if(offsetTotal != offsetCompare)
            ByteCompareStatus += 20000;
        for(int i = 0; i < length1; i++)
        {
            if(pBuffer1[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }

        lengthCompare = ext_flash_read_firmware2(0, 0,768000, pBufferCompare,768000);
        for(int i = 0; i < length2; i++)
        {
            if(pBuffer2[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }
    }
    else
    {
        /* standard firmware limited to 768000 */
        if(ext_flash_read_firmware(pBufferCompare,4,0) != 0xFFFFFFFF)
            ext_flash_erase_firmware();
        ext_flash_write_firmware(pBuffer1, length1);
        lengthCompare = ext_flash_read_firmware(pBufferCompare,768000,0);

        if(lengthCompare != length1)
            ByteCompareStatus = 10000;
        for(int i = 0; i < length1; i++)
        {
            if(pBuffer1[0] != pBufferCompare[0])
                ByteCompareStatus++;
        }
    }

    releaseFrame(20,(uint32_t)pBufferCompare);

    if(ByteCompareStatus != 0)
    {
        strcpy(&display_text[0],"\n\rcopy error.");
        display_text[255] = 21;
        return 0;
    }
    else
    {
        strcpy(&display_text[0],"\n\rready to install.");
        display_text[255] = 21;
        return 1;
    }
}

static void tComm_Error_Handler(void)
{
  while(1)
  {}
}