Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h @ 677:1953cd9145b3 Betatest
Move include file to common to ...
... get things compiled. The configuration.h file is also used from the RTE
code, so it should be in the Common tree.
Signed-off-by: Jan Mulder <jan@jlmulder.nl>
| author | Jan Mulder <jan@jlmulder.nl> |
|---|---|
| date | Wed, 20 Apr 2022 20:25:04 +0200 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_sdmmc.h * @author MCD Application Team * @brief Header file of SDMMC HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_SDMMC_H #define __STM32F4xx_LL_SDMMC_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_Driver * @{ */ /** @addtogroup SDMMC_LL * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types * @{ */ /** * @brief SDMMC Configuration Structure definition */ typedef struct { uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ uint32_t ClockBypass; /*!< Specifies whether the SDMMC Clock divider bypass is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Clock_Bypass */ uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or disabled when the bus is idle. This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ uint32_t BusWide; /*!< Specifies the SDMMC bus width. This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ }SDIO_InitTypeDef; /** * @brief SDMMC Command Control structure */ typedef struct { uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent to a card as part of a command message. If a command contains an argument, it must be loaded into this register before writing the command to the command register. */ uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and Max_Data = 64 */ uint32_t Response; /*!< Specifies the SDMMC response type. This parameter can be a value of @ref SDMMC_LL_Response_Type */ uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_CPSM_State */ }SDIO_CmdInitTypeDef; /** * @brief SDMMC Data Control structure */ typedef struct { uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer is a read or write. This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) is enabled or disabled. This parameter can be a value of @ref SDMMC_LL_DPSM_State */ }SDIO_DataInitTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants * @{ */ #define SDMMC_ERROR_NONE 0x00000000U /*!< No error */ #define SDMMC_ERROR_CMD_CRC_FAIL 0x00000001U /*!< Command response received (but CRC check failed) */ #define SDMMC_ERROR_DATA_CRC_FAIL 0x00000002U /*!< Data block sent/received (CRC check failed) */ #define SDMMC_ERROR_CMD_RSP_TIMEOUT 0x00000004U /*!< Command response timeout */ #define SDMMC_ERROR_DATA_TIMEOUT 0x00000008U /*!< Data timeout */ #define SDMMC_ERROR_TX_UNDERRUN 0x00000010U /*!< Transmit FIFO underrun */ #define SDMMC_ERROR_RX_OVERRUN 0x00000020U /*!< Receive FIFO overrun */ #define SDMMC_ERROR_ADDR_MISALIGNED 0x00000040U /*!< Misaligned address */ #define SDMMC_ERROR_BLOCK_LEN_ERR 0x00000080U /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ #define SDMMC_ERROR_ERASE_SEQ_ERR 0x00000100U /*!< An error in the sequence of erase command occurs */ #define SDMMC_ERROR_BAD_ERASE_PARAM 0x00000200U /*!< An invalid selection for erase groups */ #define SDMMC_ERROR_WRITE_PROT_VIOLATION 0x00000400U /*!< Attempt to program a write protect block */ #define SDMMC_ERROR_LOCK_UNLOCK_FAILED 0x00000800U /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ #define SDMMC_ERROR_COM_CRC_FAILED 0x00001000U /*!< CRC check of the previous command failed */ #define SDMMC_ERROR_ILLEGAL_CMD 0x00002000U /*!< Command is not legal for the card state */ #define SDMMC_ERROR_CARD_ECC_FAILED 0x00004000U /*!< Card internal ECC was applied but failed to correct the data */ #define SDMMC_ERROR_CC_ERR 0x00008000U /*!< Internal card controller error */ #define SDMMC_ERROR_GENERAL_UNKNOWN_ERR 0x00010000U /*!< General or unknown error */ #define SDMMC_ERROR_STREAM_READ_UNDERRUN 0x00020000U /*!< The card could not sustain data reading in stream rmode */ #define SDMMC_ERROR_STREAM_WRITE_OVERRUN 0x00040000U /*!< The card could not sustain data programming in stream mode */ #define SDMMC_ERROR_CID_CSD_OVERWRITE 0x00080000U /*!< CID/CSD overwrite error */ #define SDMMC_ERROR_WP_ERASE_SKIP 0x00100000U /*!< Only partial address space was erased */ #define SDMMC_ERROR_CARD_ECC_DISABLED 0x00200000U /*!< Command has been executed without using internal ECC */ #define SDMMC_ERROR_ERASE_RESET 0x00400000U /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ #define SDMMC_ERROR_AKE_SEQ_ERR 0x00800000U /*!< Error in sequence of authentication */ #define SDMMC_ERROR_INVALID_VOLTRANGE 0x01000000U /*!< Error in case of invalid voltage range */ #define SDMMC_ERROR_ADDR_OUT_OF_RANGE 0x02000000U /*!< Error when addressed block is out of range */ #define SDMMC_ERROR_REQUEST_NOT_APPLICABLE 0x04000000U /*!< Error when command request is not applicable */ #define SDMMC_ERROR_INVALID_PARAMETER 0x08000000U /*!< the used parameter is not valid */ #define SDMMC_ERROR_UNSUPPORTED_FEATURE 0x10000000U /*!< Error when feature is not insupported */ #define SDMMC_ERROR_BUSY 0x20000000U /*!< Error when transfer process is busy */ #define SDMMC_ERROR_DMA 0x40000000U /*!< Error while DMA transfer */ #define SDMMC_ERROR_TIMEOUT 0x80000000U /*!< Timeout error */ /** * @brief SDMMC Commands Index */ #define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ #define SDMMC_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ #define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ #define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ #define SDMMC_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ #define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ #define SDMMC_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ #define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ #define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information and asks the card whether card supports voltage. */ #define SDMMC_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ #define SDMMC_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ #define SDMMC_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ #define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ #define SDMMC_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ #define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14) /*!< Reserved */ #define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ #define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands (read, write, lock). Default block length is fixed to 512 Bytes. Not effective for SDHS and SDXC. */ #define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ #define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by STOP_TRANSMISSION command. */ #define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ #define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ #define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ #define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ #define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ #define SDMMC_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ #define SDMMC_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ #define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ #define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ #define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ #define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ #define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ #define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command system set by switch function command (CMD6). */ #define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. Reserved for each command system set by switch function command (CMD6). */ #define SDMMC_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ #define SDMMC_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ #define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ #define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by the SET_BLOCK_LEN command. */ #define SDMMC_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather than a standard command. */ #define SDMMC_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card for general purpose/application specific commands. */ #define SDMMC_CMD_NO_CMD ((uint8_t)64) /*!< No command */ /** * @brief Following commands are SD Card Specific commands. * SDMMC_APP_CMD should be sent before sending these commands. */ #define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus widths are given in SCR register. */ #define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ #define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with 32bit+CRC data block. */ #define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ #define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ #define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ #define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ #define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ /** * @brief Following commands are SD Card Specific security commands. * SDMMC_CMD_APP_CMD should be sent before sending these commands. */ #define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43) #define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44) #define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) #define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) #define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) #define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) #define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) #define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) #define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) #define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) #define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /** * @brief Masks for errors Card Status R1 (OCR Register) */ #define SDMMC_OCR_ADDR_OUT_OF_RANGE 0x80000000U #define SDMMC_OCR_ADDR_MISALIGNED 0x40000000U #define SDMMC_OCR_BLOCK_LEN_ERR 0x20000000U #define SDMMC_OCR_ERASE_SEQ_ERR 0x10000000U #define SDMMC_OCR_BAD_ERASE_PARAM 0x08000000U #define SDMMC_OCR_WRITE_PROT_VIOLATION 0x04000000U #define SDMMC_OCR_LOCK_UNLOCK_FAILED 0x01000000U #define SDMMC_OCR_COM_CRC_FAILED 0x00800000U #define SDMMC_OCR_ILLEGAL_CMD 0x00400000U #define SDMMC_OCR_CARD_ECC_FAILED 0x00200000U #define SDMMC_OCR_CC_ERROR 0x00100000U #define SDMMC_OCR_GENERAL_UNKNOWN_ERROR 0x00080000U #define SDMMC_OCR_STREAM_READ_UNDERRUN 0x00040000U #define SDMMC_OCR_STREAM_WRITE_OVERRUN 0x00020000U #define SDMMC_OCR_CID_CSD_OVERWRITE 0x00010000U #define SDMMC_OCR_WP_ERASE_SKIP 0x00008000U #define SDMMC_OCR_CARD_ECC_DISABLED 0x00004000U #define SDMMC_OCR_ERASE_RESET 0x00002000U #define SDMMC_OCR_AKE_SEQ_ERROR 0x00000008U #define SDMMC_OCR_ERRORBITS 0xFDFFE008U /** * @brief Masks for R6 Response */ #define SDMMC_R6_GENERAL_UNKNOWN_ERROR 0x00002000U #define SDMMC_R6_ILLEGAL_CMD 0x00004000U #define SDMMC_R6_COM_CRC_FAILED 0x00008000U #define SDMMC_VOLTAGE_WINDOW_SD 0x80100000U #define SDMMC_HIGH_CAPACITY 0x40000000U #define SDMMC_STD_CAPACITY 0x00000000U #define SDMMC_CHECK_PATTERN 0x000001AAU #define SDMMC_MAX_VOLT_TRIAL 0x0000FFFFU #define SDMMC_MAX_TRIAL 0x0000FFFFU #define SDMMC_ALLZERO 0x00000000U #define SDMMC_WIDE_BUS_SUPPORT 0x00040000U #define SDMMC_SINGLE_BUS_SUPPORT 0x00010000U #define SDMMC_CARD_LOCKED 0x02000000U #define SDMMC_DATATIMEOUT 0xFFFFFFFFU #define SDMMC_0TO7BITS 0x000000FFU #define SDMMC_8TO15BITS 0x0000FF00U #define SDMMC_16TO23BITS 0x00FF0000U #define SDMMC_24TO31BITS 0xFF000000U #define SDMMC_MAX_DATA_LENGTH 0x01FFFFFFU #define SDMMC_HALFFIFO 0x00000008U #define SDMMC_HALFFIFOBYTES 0x00000020U /** * @brief Command Class supported */ #define SDIO_CCCC_ERASE 0x00000020U #define SDIO_CMDTIMEOUT 5000U /* Command send and response timeout */ #define SDIO_MAXERASETIMEOUT 63000U /* Max erase Timeout 63 s */ /** @defgroup SDIO_LL_Clock_Edge Clock Edge * @{ */ #define SDIO_CLOCK_EDGE_RISING 0x00000000U #define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE #define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) /** * @} */ /** @defgroup SDIO_LL_Clock_Bypass Clock Bypass * @{ */ #define SDIO_CLOCK_BYPASS_DISABLE 0x00000000U #define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS #define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Clock_Power_Save Clock Power Saving * @{ */ #define SDIO_CLOCK_POWER_SAVE_DISABLE 0x00000000U #define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV #define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Bus_Wide Bus Width * @{ */ #define SDIO_BUS_WIDE_1B 0x00000000U #define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 #define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 #define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ ((WIDE) == SDIO_BUS_WIDE_4B) || \ ((WIDE) == SDIO_BUS_WIDE_8B)) /** * @} */ /** @defgroup SDIO_LL_Hardware_Flow_Control Hardware Flow Control * @{ */ #define SDIO_HARDWARE_FLOW_CONTROL_DISABLE 0x00000000U #define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN #define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Clock_Division Clock Division * @{ */ #define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU) /** * @} */ /** @defgroup SDIO_LL_Command_Index Command Index * @{ */ #define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U) /** * @} */ /** @defgroup SDIO_LL_Response_Type Response Type * @{ */ #define SDIO_RESPONSE_NO 0x00000000U #define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 #define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP #define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ ((RESPONSE) == SDIO_RESPONSE_LONG)) /** * @} */ /** @defgroup SDIO_LL_Wait_Interrupt_State Wait Interrupt * @{ */ #define SDIO_WAIT_NO 0x00000000U #define SDIO_WAIT_IT SDIO_CMD_WAITINT #define SDIO_WAIT_PEND SDIO_CMD_WAITPEND #define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ ((WAIT) == SDIO_WAIT_IT) || \ ((WAIT) == SDIO_WAIT_PEND)) /** * @} */ /** @defgroup SDIO_LL_CPSM_State CPSM State * @{ */ #define SDIO_CPSM_DISABLE 0x00000000U #define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN #define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ ((CPSM) == SDIO_CPSM_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Response_Registers Response Register * @{ */ #define SDIO_RESP1 0x00000000U #define SDIO_RESP2 0x00000004U #define SDIO_RESP3 0x00000008U #define SDIO_RESP4 0x0000000CU #define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ ((RESP) == SDIO_RESP2) || \ ((RESP) == SDIO_RESP3) || \ ((RESP) == SDIO_RESP4)) /** * @} */ /** @defgroup SDIO_LL_Data_Length Data Lenght * @{ */ #define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) /** * @} */ /** @defgroup SDIO_LL_Data_Block_Size Data Block Size * @{ */ #define SDIO_DATABLOCK_SIZE_1B 0x00000000U #define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 #define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 #define SDIO_DATABLOCK_SIZE_8B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1) #define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 #define SDIO_DATABLOCK_SIZE_32B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_64B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_128B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) #define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 #define SDIO_DATABLOCK_SIZE_512B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_1024B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_2048B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_4096B (SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_8192B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define SDIO_DATABLOCK_SIZE_16384B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) #define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) /** * @} */ /** @defgroup SDIO_LL_Transfer_Direction Transfer Direction * @{ */ #define SDIO_TRANSFER_DIR_TO_CARD 0x00000000U #define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR #define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) /** * @} */ /** @defgroup SDIO_LL_Transfer_Type Transfer Type * @{ */ #define SDIO_TRANSFER_MODE_BLOCK 0x00000000U #define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE #define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ ((MODE) == SDIO_TRANSFER_MODE_STREAM)) /** * @} */ /** @defgroup SDIO_LL_DPSM_State DPSM State * @{ */ #define SDIO_DPSM_DISABLE 0x00000000U #define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN #define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ ((DPSM) == SDIO_DPSM_ENABLE)) /** * @} */ /** @defgroup SDIO_LL_Read_Wait_Mode Read Wait Mode * @{ */ #define SDIO_READ_WAIT_MODE_DATA2 0x00000000U #define SDIO_READ_WAIT_MODE_CLK (SDIO_DCTRL_RWMOD) #define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) /** * @} */ /** @defgroup SDIO_LL_Interrupt_sources Interrupt Sources * @{ */ #define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL #define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL #define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT #define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT #define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR #define SDIO_IT_RXOVERR SDIO_STA_RXOVERR #define SDIO_IT_CMDREND SDIO_STA_CMDREND #define SDIO_IT_CMDSENT SDIO_STA_CMDSENT #define SDIO_IT_DATAEND SDIO_STA_DATAEND #define SDIO_IT_STBITERR SDIO_STA_STBITERR #define SDIO_IT_DBCKEND SDIO_STA_DBCKEND #define SDIO_IT_CMDACT SDIO_STA_CMDACT #define SDIO_IT_TXACT SDIO_STA_TXACT #define SDIO_IT_RXACT SDIO_STA_RXACT #define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE #define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF #define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF #define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF #define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE #define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE #define SDIO_IT_TXDAVL SDIO_STA_TXDAVL #define SDIO_IT_RXDAVL SDIO_STA_RXDAVL #define SDIO_IT_SDIOIT SDIO_STA_SDIOIT #define SDIO_IT_CEATAEND SDIO_STA_CEATAEND /** * @} */ /** @defgroup SDIO_LL_Flags Flags * @{ */ #define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL #define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL #define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT #define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT #define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR #define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR #define SDIO_FLAG_CMDREND SDIO_STA_CMDREND #define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT #define SDIO_FLAG_DATAEND SDIO_STA_DATAEND #define SDIO_FLAG_STBITERR SDIO_STA_STBITERR #define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND #define SDIO_FLAG_CMDACT SDIO_STA_CMDACT #define SDIO_FLAG_TXACT SDIO_STA_TXACT #define SDIO_FLAG_RXACT SDIO_STA_RXACT #define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE #define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF #define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF #define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF #define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE #define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE #define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL #define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL #define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT #define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND #define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ SDIO_FLAG_DBCKEND)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup SDIO_LL_Exported_macros SDIO_LL Exported Macros * @{ */ /** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region * @{ */ /* ------------ SDIO registers bit address in the alias region -------------- */ #define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) /* --- CLKCR Register ---*/ /* Alias word address of CLKEN bit */ #define CLKCR_OFFSET (SDIO_OFFSET + 0x04U) #define CLKEN_BITNUMBER 0x08U #define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U)) /* --- CMD Register ---*/ /* Alias word address of SDIOSUSPEND bit */ #define CMD_OFFSET (SDIO_OFFSET + 0x0CU) #define SDIOSUSPEND_BITNUMBER 0x0BU #define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U)) /* Alias word address of ENCMDCOMPL bit */ #define ENCMDCOMPL_BITNUMBER 0x0CU #define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U)) /* Alias word address of NIEN bit */ #define NIEN_BITNUMBER 0x0DU #define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U)) /* Alias word address of ATACMD bit */ #define ATACMD_BITNUMBER 0x0EU #define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U)) /* --- DCTRL Register ---*/ /* Alias word address of DMAEN bit */ #define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU) #define DMAEN_BITNUMBER 0x03U #define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U)) /* Alias word address of RWSTART bit */ #define RWSTART_BITNUMBER 0x08U #define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U)) /* Alias word address of RWSTOP bit */ #define RWSTOP_BITNUMBER 0x09U #define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U)) /* Alias word address of RWMOD bit */ #define RWMOD_BITNUMBER 0x0AU #define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U)) /* Alias word address of SDIOEN bit */ #define SDIOEN_BITNUMBER 0x0BU #define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U)) /** * @} */ /** @defgroup SDIO_LL_Register Bits And Addresses Definitions * @brief SDIO_LL registers bit address in the alias region * @{ */ /* ---------------------- SDIO registers bit mask --------------------------- */ /* --- CLKCR Register ---*/ /* CLKCR register clear mask */ #define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) /* --- DCTRL Register ---*/ /* SDIO DCTRL Clear Mask */ #define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) /* --- CMD Register ---*/ /* CMD Register clear mask */ #define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) /* SDIO Initialization Frequency (400KHz max) */ #define SDIO_INIT_CLK_DIV ((uint8_t)0x76) /* SDIO Data Transfer Frequency (25MHz max) */ #define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) /** * @} */ /** @defgroup SDIO_LL_Interrupt_Clock Interrupt And Clock Configuration * @brief macros to handle interrupts and specific clock configurations * @{ */ /** * @brief Enable the SDIO device. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_ENABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) /** * @brief Disable the SDIO device. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DISABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) /** * @brief Enable the SDIO DMA transfer. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DMA_ENABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) /** * @brief Disable the SDIO DMA transfer. * @param __INSTANCE__ SDIO Instance * @retval None */ #define __SDIO_DMA_DISABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) /** * @brief Enable the SDIO device interrupt. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt sources to be enabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) /** * @brief Disable the SDIO device interrupt. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt sources to be disabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) /** * @brief Checks whether the specified SDIO flag is set or not. * @param __INSTANCE__ Pointer to SDIO register base * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_CMDACT: Command transfer in progress * @arg SDIO_FLAG_TXACT: Data transmit in progress * @arg SDIO_FLAG_RXACT: Data receive in progress * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval The new state of SDIO_FLAG (SET or RESET). */ #define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) /** * @brief Clears the SDIO pending flags. * @param __INSTANCE__ Pointer to SDIO register base * @param __FLAG__ specifies the flag to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval None */ #define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) /** * @brief Checks whether the specified SDIO interrupt has occurred or not. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the SDIO interrupt source to check. * This parameter can be one of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval The new state of SDIO_IT (SET or RESET). */ #define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) /** * @brief Clears the SDIO's interrupt pending bits. * @param __INSTANCE__ Pointer to SDIO register base * @param __INTERRUPT__ specifies the interrupt pending bit to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) /** * @brief Enable Start the SD I/O Read Wait operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_START_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) /** * @brief Disable Start the SD I/O Read Wait operations. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_START_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) /** * @brief Enable Start the SD I/O Read Wait operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_STOP_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) /** * @brief Disable Stop the SD I/O Read Wait operations. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_STOP_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) /** * @brief Enable the SD I/O Mode Operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_OPERATION_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) /** * @brief Disable the SD I/O Mode Operation. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_OPERATION_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) /** * @brief Enable the SD I/O Suspend command sending. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_SUSPEND_CMD_ENABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) /** * @brief Disable the SD I/O Suspend command sending. * @param __INSTANCE__ Pointer to SDIO register base * @retval None */ #define __SDIO_SUSPEND_CMD_DISABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) /** * @brief Enable the command completion signal. * @retval None */ #define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) /** * @brief Disable the command completion signal. * @retval None */ #define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) /** * @brief Enable the CE-ATA interrupt. * @retval None */ #define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U) /** * @brief Disable the CE-ATA interrupt. * @retval None */ #define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U) /** * @brief Enable send CE-ATA command (CMD61). * @retval None */ #define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) /** * @brief Disable send CE-ATA command (CMD61). * @retval None */ #define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SDMMC_LL_Exported_Functions * @{ */ /* Initialization/de-initialization functions **********************************/ /** @addtogroup HAL_SDMMC_LL_Group1 * @{ */ HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); /** * @} */ /* I/O operation functions *****************************************************/ /** @addtogroup HAL_SDMMC_LL_Group2 * @{ */ uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); /** * @} */ /* Peripheral Control functions ************************************************/ /** @addtogroup HAL_SDMMC_LL_Group3 * @{ */ HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); /* Command path state machine (CPSM) management functions */ HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command); uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response); /* Data path state machine (DPSM) management functions */ HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data); uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); /* SDMMC Cards mode management functions */ HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode); /* SDMMC Commands management functions */ uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize); uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr); uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t SdType); uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth); uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA); uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx); uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument); uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_SDMMC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/