Mercurial > public > ostc4

view Discovery/Src/simulation.c @ 837:18946846b95b Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Bugfixes and code cleanup for BF views: BF views gauge and apnoe were using "dive computer" T3 view functions which caused some problem because these legacy views were not intended to work with customer view selection. A switch condition has been added to skip these kind of functions in case a design other T3 is in use. Another potential problem was that there were two definitions for T3 and T7 views which were basically the same. If they wold not be the same the switching functionality wold not work properly. To avoid this problem in futur the arrays have been merged => the view are handled sing the (newer) cv_view arrays instead of the standard_views which were in used before the user could the views which should be shown.
author ideenmodellierer
date Wed, 27 Dec 2023 19:37:17 +0100
parents b7d93ff6b3b2
children 07af9efd7c13
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Src/simulation.c
/// \brief  Contains dive simulation functionality
/// \author Heinrichs Weikamp gmbh
/// \date   13-Oct-2014
///
/// \details
///     The simulation uses "extern SDiveState stateSim" defined in dataCentral.h"
///
///     simulation_start(void) sets stateUsed to stateSim and initializes simulation
///     simulation_UpdateLifeData should be called at least once per second
///     simulation_end() sets stateUsed back to stateReal
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

#include <string.h>
#include "simulation.h"

#include "decom.h"
#include "calc_crush.h"
#include "data_exchange.h"
#include "data_exchange_main.h"
#include "timer.h"
#include "check_warning.h"
#include "vpm.h"
#include "buehlmann.h"
#include "logbook_miniLive.h"

#include "configuration.h"

//Private state variables
static float sim_aim_depth_meter;
static float sim_aim_time_minutes;
static _Bool sim_heed_decostops = 1;

static const float sim_descent_rate_meter_per_min = 20;


//Private functions
static float sim_get_ambient_pressure(SDiveState * pDiveState);
static void sim_reduce_deco_time_one_second(SDiveState* pDiveState);
static void simulation_set_aim_depth(int depth_meter);

#define NUM_OF_SENSORS	(3u)
#define SIM_PPO2_STEP	(1.1f)
static float simSensmVOffset[NUM_OF_SENSORS];

/**
  ******************************************************************************
  * @brief  sets heed_decostops_while_ascending
  ******************************************************************************
  * @param heed_decostops_while_ascending : true -> deco_stops are considered while ascending
  * @return void
  */
void simulation_set_heed_decostops(_Bool heed_decostops_while_ascending)
{
	sim_heed_decostops = heed_decostops_while_ascending;
}

/**
  ******************************************************************************
  * @brief  start of simulation
  ******************************************************************************
  * @return void
  */
void simulation_start(int aim_depth, uint16_t aim_time_minutes)
{
	copyDiveSettingsToSim();
    copyVpmRepetetiveDataToSim();
  //vpm_init(&stateSimGetPointerWrite()->vpm,  stateSimGetPointerWrite()->diveSettings.vpm_conservatism, 0, 0);
    stateSimGetPointerWrite()->lifeData.counterSecondsShallowDepth = 0;
    stateSimGetPointerWrite()->mode = MODE_DIVE;
    if(aim_depth <= 0)
        aim_depth = 20;
    simulation_set_aim_depth(aim_depth);
    sim_aim_time_minutes = aim_time_minutes;
    timer_init();
    set_stateUsedToSim();
    stateSim.lifeData.boolResetAverageDepth = 1;
    decoLock = DECO_CALC_init_as_is_start_of_dive;

    stateSim.lifeData.apnea_total_max_depth_meter = 0;
    memset(simSensmVOffset,0,sizeof(simSensmVOffset));
}

/**
  ******************************************************************************
  * @brief  end of simulation
  ******************************************************************************
  *
  * @return void
  */
void simulation_exit(void)
{
    timer_Stopwatch_Stop();

    disableTimer();

    set_stateUsedToReal();
}

/**
  ******************************************************************************
  * @brief  simulates change of Lifedata (saturation, depth change, etc.) within one second
  ******************************************************************************
  *
  * @param  checkOncePerSecond : true -> simulation in real time (function is evaluated only once per second)
  *																			 and copy of parts of LifeData from SmallCPU with each call from HAL_TIM_PeriodElapsedCallback()
  *                            : false -> fast simulation (many simulation cycles per second are possible)
  * @return void
  */
void simulation_UpdateLifeData( _Bool checkOncePerSecond)
{
    SDiveState * pDiveState = &stateSim;
    const SDiveState * pRealState = stateRealGetPointer();
	SSettings *pSettings;

    static int last_second = -1;
    static _Bool two_second = 0;
    static float lastPressure_bar = 0;

    if (sim_aim_time_minutes && sim_aim_time_minutes * 60 <= pDiveState->lifeData.dive_time_seconds) {
        simulation_set_aim_depth(0);
    }

    float localCalibCoeff[3] = { 0.0, 0.0, 0.0 };
    uint8_t index, index2;

    if(checkOncePerSecond)
    {

        pSettings = settingsGetPointer();
        for(index = 0; index < 3; index++)
        {
        	localCalibCoeff[index] = pSettings->ppo2sensors_calibCoeff[index];
        	if(localCalibCoeff[index] < 0.01)
        	{
        		for(index2 = 0; index2 < 3; index2++)		/* no valid coeff => check other entries */
        		{
        			if(pSettings->ppo2sensors_calibCoeff[index2] > 0.01)
        			{
        				localCalibCoeff[index] = pSettings->ppo2sensors_calibCoeff[index2];
        				break;
        			}
        			if(index2 == 3)		/* no coeff at all => use default */
        			{
        				localCalibCoeff[index] = 0.02;
        			}
        		}
        	}
        }

        pDiveState->lifeData.temperature_celsius = pRealState->lifeData.temperature_celsius;
        pDiveState->lifeData.battery_charge = pRealState->lifeData.battery_charge;
        pDiveState->lifeData.compass_heading = pRealState->lifeData.compass_heading;
        pDiveState->lifeData.compass_roll = pRealState->lifeData.compass_roll;
        pDiveState->lifeData.compass_pitch = pRealState->lifeData.compass_pitch;

        for(index = 0; index < 3; index++)
        {
        	memcpy(&pDiveState->lifeData.extIf_sensor_data[index], &pRealState->lifeData.extIf_sensor_data[index], 32);
        }

#ifdef ENABLE_BOTTLE_SENSOR
        pDiveState->lifeData.bottle_bar[pDiveState->lifeData.actualGas.GasIdInSettings] = pRealState->lifeData.bottle_bar[pRealState->lifeData.actualGas.GasIdInSettings];
        pDiveState->lifeData.bottle_bar_age_MilliSeconds[pDiveState->lifeData.actualGas.GasIdInSettings] = pRealState->lifeData.bottle_bar_age_MilliSeconds[pRealState->lifeData.actualGas.GasIdInSettings];
#endif
        int now =  current_second();
        if( last_second == now)
                return;
        last_second = now;

        if(!two_second)
            two_second = 1;
        else
        {
            two_second = 0;
            if(lastPressure_bar >= 0)
            {
                //2 seconds * 30 == 1 minute, bar * 10 = meter
                pDiveState->lifeData.ascent_rate_meter_per_min = (lastPressure_bar - pDiveState->lifeData.pressure_ambient_bar)  * 30 * 10;
            }
            lastPressure_bar = pDiveState->lifeData.pressure_ambient_bar;
        }
    }
    else if(pDiveState->lifeData.depth_meter <= (float)(decom_get_actual_deco_stop(pDiveState) + 0.001))
      sim_reduce_deco_time_one_second(pDiveState);

    pDiveState->lifeData.dive_time_seconds += 1;
    pDiveState->lifeData.pressure_ambient_bar = sim_get_ambient_pressure(pDiveState);

    pDiveState->lifeData.sensorVoltage_mV[0] = pRealState->lifeData.sensorVoltage_mV[0] + simSensmVOffset[0];
    if(pDiveState->lifeData.sensorVoltage_mV[0] < 0.0) { pDiveState->lifeData.sensorVoltage_mV[0] = 0.0; }
    pDiveState->lifeData.sensorVoltage_mV[1] = pRealState->lifeData.sensorVoltage_mV[1] + simSensmVOffset[1];
    if(pDiveState->lifeData.sensorVoltage_mV[1] < 0.0) { pDiveState->lifeData.sensorVoltage_mV[1] = 0.0; }
    pDiveState->lifeData.sensorVoltage_mV[2] = pRealState->lifeData.sensorVoltage_mV[2] + simSensmVOffset[2];
    if(pDiveState->lifeData.sensorVoltage_mV[2] < 0.0) { pDiveState->lifeData.sensorVoltage_mV[2] = 0.0; }

    pDiveState->lifeData.ppO2Sensor_bar[0]  = pDiveState->lifeData.sensorVoltage_mV[0] * localCalibCoeff[0] * pDiveState->lifeData.pressure_ambient_bar;
    pDiveState->lifeData.ppO2Sensor_bar[1]  = pDiveState->lifeData.sensorVoltage_mV[1] * localCalibCoeff[1] * pDiveState->lifeData.pressure_ambient_bar;
    pDiveState->lifeData.ppO2Sensor_bar[2]  = pDiveState->lifeData.sensorVoltage_mV[2] * localCalibCoeff[2] * pDiveState->lifeData.pressure_ambient_bar;

    pDiveState->lifeData.CO2_data.CO2_ppm  = pRealState->lifeData.CO2_data.CO2_ppm;

    if(is_ambient_pressure_close_to_surface(&pDiveState->lifeData)) // new hw 170214
    {
        if(!(stateSimGetPointer()->lifeData.counterSecondsShallowDepth))
        {
            if(pDiveState->diveSettings.diveMode != DIVEMODE_Apnea)
                pDiveState->lifeData.counterSecondsShallowDepth = settingsGetPointer()->timeoutDiveReachedZeroDepth - 15;
            else
            {
                pDiveState->lifeData.apnea_last_dive_time_seconds = pDiveState->lifeData.dive_time_seconds;
                if(pDiveState->lifeData.apnea_last_dive_time_seconds > pDiveState->lifeData.dive_time_seconds_without_surface_time)
                    pDiveState->lifeData.apnea_last_dive_time_seconds = pDiveState->lifeData.dive_time_seconds_without_surface_time;
                pDiveState->lifeData.apnea_last_max_depth_meter = pDiveState->lifeData.max_depth_meter;
                pDiveState->lifeData.counterSecondsShallowDepth = 1;
            }
        }
    }
    else
    {
        pDiveState->lifeData.counterSecondsShallowDepth = 0;
    }

    if(!is_ambient_pressure_close_to_surface(&pDiveState->lifeData) && !(stateSimGetPointer()->lifeData.counterSecondsShallowDepth) )
    {
    	pDiveState->lifeData.dive_time_seconds_without_surface_time += 1;
    }

    pDiveState->lifeData.depth_meter = (pDiveState->lifeData.pressure_ambient_bar - pDiveState->lifeData.pressure_surface_bar) * 10.0f;
    if(pDiveState->lifeData.max_depth_meter < pDiveState->lifeData.depth_meter)
            pDiveState->lifeData.max_depth_meter = pDiveState->lifeData.depth_meter;

    /* apnoe specials
     */
    if(pDiveState->diveSettings.diveMode == DIVEMODE_Apnea)
    {
        if(pDiveState->lifeData.max_depth_meter > pDiveState->lifeData.apnea_total_max_depth_meter)
            pDiveState->lifeData.apnea_total_max_depth_meter = pDiveState->lifeData.max_depth_meter;

        if(pDiveState->lifeData.counterSecondsShallowDepth)
        {
            pDiveState->lifeData.dive_time_seconds = 0;
            pDiveState->lifeData.max_depth_meter = 0;
            pDiveState->lifeData.boolResetAverageDepth = 1;
        }
    }

    setAvgDepth(pDiveState);

    /* Exposure Tissues
     */
    decom_tissues_exposure(1, &pDiveState->lifeData);
    decom_oxygen_calculate_cns_exposure(1, &pDiveState->lifeData.actualGas, pDiveState->lifeData.pressure_ambient_bar, &pDiveState->lifeData.cns);

    if(stateSimGetPointer()->lifeData.counterSecondsShallowDepth)
    {
            stateSimGetPointerWrite()->lifeData.counterSecondsShallowDepth += 1;
            if(stateSimGetPointer()->lifeData.counterSecondsShallowDepth >= settingsGetPointer()->timeoutDiveReachedZeroDepth)
                simulation_exit();
    }
    vpm_crush(pDiveState);
}

/**
  ******************************************************************************
  * @brief  adds extra time for fast simulation
  ******************************************************************************
  *@param minutes
  * @return float : new pressure
  */
static void simulation_add_time(int minutes)
{
  for(int i = 0; i < 60 * minutes; i++)
  {
    simulation_UpdateLifeData(0);
    updateMiniLiveLogbook(0);
        timer_UpdateSecond(0);
  }
}

/**
  ******************************************************************************
  * @brief  get aim_depth
  ******************************************************************************
  * @return sim_aim_depth_meter;
  */

uint16_t simulation_get_aim_depth(void)
{
    return (uint16_t)sim_aim_depth_meter;
}

/**
  ******************************************************************************
  * @brief  get heed decostops
  ******************************************************************************
  * @return true if ascend follows decostops;
  */

_Bool simulation_get_heed_decostops(void)
{
    return sim_heed_decostops;
}

/**
  ******************************************************************************
  * @brief sets aim_depth
  ******************************************************************************
  *@param depth_meter
  * @return float : new pressure
  */
static void simulation_set_aim_depth(int depth_meter)
{
    sim_aim_depth_meter = depth_meter;
}

/**
  ******************************************************************************
  * @brief  simulates ambient pressure depending on aim depth
  ******************************************************************************
  * @note if aim_depth != actual depth, the depth change within one second
  *       (depending on descent or ascent) rate is calculated
  * @param  SDiveState* pDiveState:
  * @return float : new ambient pressure
  */
static float sim_get_ambient_pressure(SDiveState * pDiveState)
{
    //Calc next depth
    uint8_t actual_deco_stop = decom_get_actual_deco_stop(pDiveState);
    float depth_meter = pDiveState->lifeData.depth_meter;
    float surface_pressure_bar = pDiveState->lifeData.pressure_surface_bar;
    if(depth_meter < sim_aim_depth_meter)
    {
        depth_meter = depth_meter + sim_descent_rate_meter_per_min / 60;
        if(depth_meter > sim_aim_depth_meter)
            depth_meter = sim_aim_depth_meter;
    }
    else if(depth_meter > sim_aim_depth_meter)
    {

        depth_meter -=  pDiveState->diveSettings.ascentRate_meterperminute / 60;
        if(depth_meter < sim_aim_depth_meter)
            depth_meter = sim_aim_depth_meter;

        if(sim_heed_decostops && depth_meter < actual_deco_stop)
        {
            if(actual_deco_stop < (depth_meter +  pDiveState->diveSettings.ascentRate_meterperminute / 60))
                 depth_meter = actual_deco_stop;
            else
                depth_meter +=  pDiveState->diveSettings.ascentRate_meterperminute / 60;
        }

   }

   return surface_pressure_bar + depth_meter / 10;
}


/**
  ******************************************************************************
  * @brief  Reduces deco time of deepest stop by one second
  ******************************************************************************
  * @note called during fast simulation
  * @param  SDiveState* pDiveState:
  * @return void
  */
static void sim_reduce_deco_time_one_second(SDiveState* pDiveState)
{
    SDecoinfo* pDecoinfo;
    if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE)
        pDecoinfo = &pDiveState->decolistBuehlmann;
    else
        pDecoinfo = &pDiveState->decolistVPM;

    //Reduce deco time of deepest stop by one second
    for(int i = DECOINFO_STRUCT_MAX_STOPS -1 ;i >= 0; i--)
    {
        if(pDecoinfo->output_stop_length_seconds[i] > 0)
        {
            pDecoinfo->output_stop_length_seconds[i]--;
            break;
        }
    }
}

SDecoinfo* simulation_decoplaner(uint16_t depth_meter, uint16_t intervall_time_minutes, uint16_t dive_time_minutes, uint8_t *gasChangeListDepthGas20x2)
{
    uint8_t ptrGasChangeList = 0; // new hw 160704

    for (int i = 0; i < 40; i++)
    	gasChangeListDepthGas20x2[i] = 0;

    SDiveState * pDiveState = &stateSim;
    copyDiveSettingsToSim();
    vpm_init(&pDiveState->vpm,  pDiveState->diveSettings.vpm_conservatism, 0, 0);
    //buehlmann_init();
    //timer_init();
    memset(&pDiveState->events,0, sizeof(SEvents));
    pDiveState->diveSettings.internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero = 0;
    //Calc desaturation during intervall (with Air)
    setActualGasAir(&pDiveState->lifeData);
    if(intervall_time_minutes > 0)
    {
        decom_tissues_exposure(intervall_time_minutes * 60, &pDiveState->lifeData);
        decom_oxygen_calculate_cns_degrade(&pDiveState->lifeData.cns, intervall_time_minutes * 60);
    }

    //Switch to first Gas
    setActualGasFirst(&pDiveState->lifeData);

    // new hw 160704
    if(gasChangeListDepthGas20x2)
    {
        gasChangeListDepthGas20x2[ptrGasChangeList++] = 0;
        gasChangeListDepthGas20x2[ptrGasChangeList++] = pDiveState->lifeData.actualGas.GasIdInSettings;
        gasChangeListDepthGas20x2[0] =0; // depth zero
    }

    //Going down / descent
    simulation_set_aim_depth(depth_meter);
    sim_aim_time_minutes = 0;
    for(int i = 0; i < 60 * dive_time_minutes; i++)
    {
        simulation_UpdateLifeData(0);
        check_warning2(pDiveState);
        if(pDiveState->warnings.betterGas)
        {
            setActualGas(&pDiveState->lifeData,actualBetterGasId(),pDiveState->lifeData.actualGas.setPoint_cbar);
            if(gasChangeListDepthGas20x2 && (pDiveState->diveSettings.diveMode == DIVEMODE_OC))
            {
                gasChangeListDepthGas20x2[ptrGasChangeList++] = pDiveState->lifeData.depth_meter;
                gasChangeListDepthGas20x2[ptrGasChangeList++] = actualBetterGasId();
            }
        }
    }

    decom_CreateGasChangeList(&pDiveState->diveSettings, &pDiveState->lifeData); // was there before and needed for buehlmann_calc_deco and vpm_calc

    // new hw 160704
    if(gasChangeListDepthGas20x2 && (pDiveState->diveSettings.diveMode == DIVEMODE_OC))
    {
        // change direction from better gas to deco gas
        gasChangeListDepthGas20x2[ptrGasChangeList++] = 255;
        gasChangeListDepthGas20x2[ptrGasChangeList++] = 255;

        // ascend (deco) gases
        for(int i=1; i<=5;i++)
        {
            if((pDiveState->diveSettings.decogaslist[i].change_during_ascent_depth_meter_otherwise_zero == 0)
            		|| (pDiveState->diveSettings.gas[pDiveState->diveSettings.decogaslist[i].GasIdInSettings].note.ub.decocalc == 0))
                break;
            gasChangeListDepthGas20x2[ptrGasChangeList++] = pDiveState->diveSettings.decogaslist[i].change_during_ascent_depth_meter_otherwise_zero;
            gasChangeListDepthGas20x2[ptrGasChangeList++] = pDiveState->diveSettings.decogaslist[i].GasIdInSettings;
        }
        gasChangeListDepthGas20x2[0] = 0;
    }

    // deco and ascend calc
    if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE)
    {
        /* this does modify the cns now 11.06.2015 */
        buehlmann_calc_deco(&pDiveState->lifeData,&pDiveState->diveSettings,&pDiveState->decolistBuehlmann);
        pDiveState->lifeData.cns += buehlmann_get_gCNS();
        return &pDiveState->decolistBuehlmann;
    }
    else
    {
        /* this does modify the cns now 11.06.2015 */
        vpm_calc(&pDiveState->lifeData,&pDiveState->diveSettings,&pDiveState->vpm,&pDiveState->decolistVPM, DECOSTOPS);
        pDiveState->lifeData.cns += vpm_get_CNS();
        return &pDiveState->decolistVPM;
    }
}

static float sGChelper_bar(uint16_t depth_meter)
{
    SDiveState * pDiveState = &stateSim;
    float ambient, surface, density, meter;

    surface = pDiveState->lifeData.pressure_surface_bar;

    if(!depth_meter)
        return surface;

    density = ((float)( 100 + settingsGetPointer()->salinity)) / 100.0f;
    meter = depth_meter * (0.09807f * density);
    ambient = (meter + surface);

    return ambient;
}


/**
  ******************************************************************************
  * @brief  simulation_helper_change_points
  ******************************************************************************
    * @param
  * @return void
  */
void simulation_helper_change_points(SSimDataSummary *outputSummary, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, const uint8_t *gasChangeListDepthGas20x2)
{
    uint8_t ptrDecoInfo = 0;
    uint16_t actualDepthPoint = 0;
    uint16_t nextDepthPoint = 0;
    uint8_t actualConsumGasId = 0;
    uint8_t nextGasChangeMeter = 0;
    uint8_t ptrChangeList = 0;

    float timeThis = 0;
    float timeSummary = 0;
    float	sim_descent_rate_meter_per_min_local = 10;
    float	sim_ascent_rate_meter_per_min_local = 10;

    SDiveState * pDiveState = &stateSim;

    uint8_t depthDecoNext, depthLast, depthSecond, depthInc;

    if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE)
    {
        sim_descent_rate_meter_per_min_local = sim_descent_rate_meter_per_min; // const float
        sim_ascent_rate_meter_per_min_local = pDiveState->diveSettings.ascentRate_meterperminute;
    }
    else
    {
        sim_descent_rate_meter_per_min_local = sim_descent_rate_meter_per_min; // const float
        sim_ascent_rate_meter_per_min_local = 10;// fix in vpm_calc_deco();
    }

    outputSummary->descentRateMeterPerMinute = sim_descent_rate_meter_per_min_local;
    outputSummary->ascentRateMeterPerMinute = sim_ascent_rate_meter_per_min_local;

    // bottom gas ppO2
    if(gasChangeListDepthGas20x2)
    {
        nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
        actualConsumGasId = gasChangeListDepthGas20x2[ptrChangeList++];
        nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];

        while(actualDepthPoint < depth_meter)
        {
            if(nextGasChangeMeter && (nextGasChangeMeter < depth_meter) && (gasChangeListDepthGas20x2[ptrChangeList] != 255))  // list has 255,255 for turn from travel to deco
            {
                nextDepthPoint = nextGasChangeMeter;
            }
            else
            {
                nextDepthPoint = depth_meter;
            }

            if(actualConsumGasId > 5) // safety first
                actualConsumGasId = 0;

            actualDepthPoint = nextDepthPoint;

            if(actualDepthPoint != depth_meter)
            {
                actualConsumGasId = gasChangeListDepthGas20x2[ptrChangeList++];
                nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
            }
        }
    }
    else
    {
        actualConsumGasId = pDiveState->lifeData.actualGas.GasIdInSettings;
        nextGasChangeMeter = 0;
    }
    outputSummary->ppO2AtBottom = (sGChelper_bar(depth_meter) - WATER_VAPOUR_PRESSURE) * pDiveState->diveSettings.gas[actualConsumGasId].oxygen_percentage / 100.0f;


    // going down
    actualDepthPoint = 0;
    nextDepthPoint = depth_meter;

    timeThis = ((float)(nextDepthPoint - actualDepthPoint)) / sim_descent_rate_meter_per_min_local;
    timeSummary += timeThis;
    outputSummary->timeToBottom = (uint16_t)timeThis;

    // bottom time
    timeThis = ((float)dive_time_minutes) - timeSummary;
    timeSummary += timeThis;
    outputSummary->timeAtBottom = (uint16_t)timeSummary;


    // ascend to first deco stop
    actualDepthPoint = depth_meter; // that is where we are
    timeThis = 0;

    if(!decoInfoInput->output_stop_length_seconds[0]) // NDL dive
    {
        depthLast = 0;
        ptrDecoInfo = 0;
        depthDecoNext = 0;
    }
    else
    {
        // prepare deco stop list
        depthLast 		= (uint8_t)(stateUsed->diveSettings.last_stop_depth_bar * 10);
        depthSecond 	= (uint8_t)(stateUsed->diveSettings.input_second_to_last_stop_depth_bar * 10);
        depthInc 			= (uint8_t)(stateUsed->diveSettings.input_next_stop_increment_depth_bar * 10);

        for(ptrDecoInfo=DECOINFO_STRUCT_MAX_STOPS-1; ptrDecoInfo>0; ptrDecoInfo--)
            if(decoInfoInput->output_stop_length_seconds[ptrDecoInfo]) break;

        if(ptrDecoInfo == 0)
        {
            depthDecoNext = depthLast;
        }
        else
            depthDecoNext = depthSecond + (( ptrDecoInfo - 1 )* depthInc);
    }

    nextDepthPoint = depthDecoNext;
    if(actualDepthPoint > nextDepthPoint)
    {
        // flip signs! It's going up
        timeThis = ((float)(actualDepthPoint - nextDepthPoint)) / sim_ascent_rate_meter_per_min_local;
        actualDepthPoint = nextDepthPoint; // that is where we are
    }
    timeSummary += timeThis;
    outputSummary->timeToFirstStop = (uint16_t)timeSummary;
    outputSummary->depthMeterFirstStop = actualDepthPoint;

    //ascent
    nextDepthPoint = 0;
    timeThis = 0;
    if(actualDepthPoint > nextDepthPoint) // only if deco
    {
        // ascent time
        timeThis = ((float)(actualDepthPoint - nextDepthPoint)) / sim_ascent_rate_meter_per_min_local;

        // deco stop time
        for(ptrDecoInfo=0;ptrDecoInfo < DECOINFO_STRUCT_MAX_STOPS; ptrDecoInfo++)
        {
            timeThis += decoInfoInput->output_stop_length_seconds[ptrDecoInfo] / 60;
            if(!decoInfoInput->output_stop_length_seconds[ptrDecoInfo]) break;
        }
    }
    timeSummary += timeThis;
    outputSummary->timeToSurface = (uint16_t)timeSummary;

}


/**
  ******************************************************************************
  * @brief  simulation_gas_consumption
  ******************************************************************************
  * @note called by openEdit_PlanResult() in tMenuEditPlanner.c
  * @note the ascend and descend time is taken from pDiveState->lifeData.ascent_rate_meter_per_min and const float sim_descent_rate_meter_per_min
  * @param  outputConsumptionList list from 1 to 5 for gas 1 to 5
  * @param  depth_meter for descend
  * @param  dive_time_minutes for descend and bottom time
  * @param  the calculated deco list
    * @param  gasConsumTravelInput: how many l/min for all but deco stops
    * @param  gasConsumDecoInput: how many l/min for deco stops only
  * @return void
  */

void simulation_gas_consumption(uint16_t *outputConsumptionList, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, uint8_t gasConsumTravelInput, uint8_t gasConsumDecoInput, const uint8_t *gasChangeListDepthGas20x2)
{
    uint8_t ptrDecoInfo = 0;
    uint8_t ptrChangeList = 0;
    uint8_t actualConsumGasId = 0;
    uint8_t nextGasChangeMeter = 0;
    uint16_t actualDepthPoint = 0;
    uint16_t nextDepthPoint = 0;
    uint16_t inBetweenDepthPoint = 0;
    float timeThis = 0;
    float consumThis = 0;
    float timeSummary = 0;
    float outputConsumptionTempFloat[6];
    float	sim_descent_rate_meter_per_min_local = 10;
    float	sim_ascent_rate_meter_per_min_local = 10;

    SDiveState * pDiveState = &stateSim;

    uint8_t depthDecoNext = 0;
    uint8_t depthLast = 0;
    uint8_t depthSecond = 0;
	uint8_t depthInc = 0;

    for(int i = 1; i < 6; i++)
        outputConsumptionTempFloat[i] = 0;

    if(gasChangeListDepthGas20x2)
    {
        nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
        actualConsumGasId = gasChangeListDepthGas20x2[ptrChangeList++];
        nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
    }
    else
    {
        actualConsumGasId = pDiveState->lifeData.actualGas.GasIdInSettings;
        nextGasChangeMeter = 0;
    }

    if(pDiveState->diveSettings.deco_type.ub.standard == GF_MODE)
    {
        sim_descent_rate_meter_per_min_local = sim_descent_rate_meter_per_min; // const float
        sim_ascent_rate_meter_per_min_local = pDiveState->diveSettings.ascentRate_meterperminute;
    }
    else
    {
        sim_descent_rate_meter_per_min_local = sim_descent_rate_meter_per_min; // const float
        sim_ascent_rate_meter_per_min_local = 10;// fix in vpm_calc_deco();
    }

//	while((nextGasChangeMeter < depth_meter) && (actualDepthPoint < depth_meter))
    while(actualDepthPoint < depth_meter)
    {
        if(nextGasChangeMeter && (nextGasChangeMeter < depth_meter) && (gasChangeListDepthGas20x2[ptrChangeList] != 255))  // list has 255,255 for turn from travel to deco
        {
            nextDepthPoint = nextGasChangeMeter;
        }
        else
        {
            nextDepthPoint = depth_meter;
        }

        if(actualConsumGasId > 5) // safety first
            actualConsumGasId = 0;

        timeThis = ((float)(nextDepthPoint - actualDepthPoint)) / sim_descent_rate_meter_per_min_local;
        if(actualDepthPoint) // not if on surface
        {
            consumThis = ((float)gasConsumTravelInput) * sGChelper_bar(actualDepthPoint) * timeThis;
        }
        consumThis += ((float)gasConsumTravelInput) * sGChelper_bar(nextDepthPoint -actualDepthPoint) * timeThis / 2;
        outputConsumptionTempFloat[actualConsumGasId] += consumThis;
        timeSummary += timeThis;

        actualDepthPoint = nextDepthPoint;

        if(actualDepthPoint != depth_meter)
        {
            actualConsumGasId = gasChangeListDepthGas20x2[ptrChangeList++];
            nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
        }
    }

    // bottom Time
    timeThis = ((float)dive_time_minutes) - timeSummary;

    if(timeThis > 0)
    {
        consumThis = ((float)gasConsumTravelInput) * sGChelper_bar(depth_meter) * timeThis;
        outputConsumptionTempFloat[actualConsumGasId] += consumThis;
    }

    // ascend with deco stops prepare
    if(gasChangeListDepthGas20x2)
    {
        ptrChangeList++;// gasChangeListDepthGas20x2[ptrChangeList++]; // should be the 255
        nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
    }
    else
    {
        nextGasChangeMeter = 0;
    }


    if(!decoInfoInput->output_stop_length_seconds[0]) // NDL dive
    {
        depthLast = 0;
        ptrDecoInfo = 0;
    }
    else
    {
        // prepare deco stop list
        depthLast 		= (uint8_t)(stateUsed->diveSettings.last_stop_depth_bar * 10);
        depthSecond 	= (uint8_t)(stateUsed->diveSettings.input_second_to_last_stop_depth_bar * 10);
        depthInc 			= (uint8_t)(stateUsed->diveSettings.input_next_stop_increment_depth_bar * 10);

        for(ptrDecoInfo=DECOINFO_STRUCT_MAX_STOPS-1; ptrDecoInfo>0; ptrDecoInfo--)
            if(decoInfoInput->output_stop_length_seconds[ptrDecoInfo]) break;
    }

    actualDepthPoint = depth_meter; // that is where we are

    // ascend with deco stops
    while(actualDepthPoint)
    {
        if(ptrDecoInfo == 0)
        {
            depthDecoNext = depthLast;
        }
        else
            depthDecoNext = depthSecond + (( ptrDecoInfo - 1 )* depthInc);

        if(nextGasChangeMeter && (nextGasChangeMeter > depthDecoNext))
        {
            nextDepthPoint = nextGasChangeMeter;
        }
        else
        {
            nextDepthPoint = depthDecoNext;
        }

        if(actualConsumGasId > 5) // safety first
            actualConsumGasId = 0;

        if(actualDepthPoint > nextDepthPoint)
        {
            // flip signs! It's going up
            timeThis = ((float)(actualDepthPoint - nextDepthPoint)) / sim_ascent_rate_meter_per_min_local;
            inBetweenDepthPoint = nextDepthPoint + ((actualDepthPoint - nextDepthPoint)/2);
            consumThis = ((float)gasConsumDecoInput) * sGChelper_bar(inBetweenDepthPoint) * timeThis;
/*
            if(nextDepthPoint)
            {
                consumThis = ((float)gasConsumDecoInput) * sGChelper_bar(nextDepthPoint) * timeThis;
            }
            else
            {
                consumThis = 0;
            }
            consumThis += ((float)gasConsumDecoInput) * sGChelper_bar(actualDepthPoint - nextDepthPoint) * timeThis / 2;
*/
            outputConsumptionTempFloat[actualConsumGasId] += consumThis;
        }

        if(nextGasChangeMeter && (nextDepthPoint == nextGasChangeMeter))
        {
            actualConsumGasId = gasChangeListDepthGas20x2[ptrChangeList++];
            nextGasChangeMeter = gasChangeListDepthGas20x2[ptrChangeList++];
        }

        if(actualConsumGasId > 5) // safety first
            actualConsumGasId = 0;

        if(nextDepthPoint && (nextDepthPoint == depthDecoNext))
        {
            if(decoInfoInput->output_stop_length_seconds[ptrDecoInfo])
            {
                timeThis = ((float)(decoInfoInput->output_stop_length_seconds[ptrDecoInfo])) / 60.0f;
                consumThis = ((float)gasConsumDecoInput) * sGChelper_bar(nextDepthPoint) * timeThis;
                outputConsumptionTempFloat[actualConsumGasId] += consumThis;
            }
            if(ptrDecoInfo != 0)
            {
                ptrDecoInfo--;
            }
            else
            {
                depthLast = 0;
            }
        }
        actualDepthPoint = nextDepthPoint;
    }

    // copy and return
    for(int i = 1; i < 6; i++)
        outputConsumptionList[i] = (uint16_t)(outputConsumptionTempFloat[i]);
}

/**
  ******************************************************************************
  * @brief  Simulator control during simulated dive
  ******************************************************************************
  * @note called by user via tHomeDiveMenuControl()
  * @param  void
  * @return void
  */


void Sim_Descend (void)
{
    stateSimGetPointerWrite()->lifeData.counterSecondsShallowDepth = 0;
    if(simulation_get_aim_depth() < 200)
        simulation_set_aim_depth(simulation_get_aim_depth() + 1);
}


void Sim_Ascend (void)
{
    if(simulation_get_aim_depth() > 0)
        simulation_set_aim_depth(simulation_get_aim_depth() - 1);
}


void Sim_Divetime (void)
{
    simulation_add_time(5);
}


void Sim_Quit (void)
{
    if(stateSimGetPointer()->lifeData.counterSecondsShallowDepth)
    {
        simulation_exit();
        return;
    }

    if(simulation_get_aim_depth() > 0)
    {
        simulation_set_aim_depth(0);
    }
    else
    {
        stateSimGetPointerWrite()->lifeData.depth_meter = 0;
        if(stateSimGetPointer()->diveSettings.diveMode == DIVEMODE_Apnea)
        {
            stateSimGetPointerWrite()->lifeData.counterSecondsShallowDepth = 1;
        }
        else
        {
            stateSimGetPointerWrite()->lifeData.counterSecondsShallowDepth = settingsGetPointer()->timeoutDiveReachedZeroDepth - 15;
        }
    }
}

void Sim_IncreasePPO(uint8_t sensorIdx)
{
	if((sensorIdx < NUM_OF_SENSORS) && (simSensmVOffset[sensorIdx] + SIM_PPO2_STEP < 100.0) && ((stateUsed->diveSettings.ppo2sensors_deactivated & (1 << sensorIdx)) == 0))
	{
		simSensmVOffset[sensorIdx] += SIM_PPO2_STEP;
	}
}
void Sim_DecreasePPO(uint8_t sensorIdx)
{
	if((sensorIdx < NUM_OF_SENSORS) && (simSensmVOffset[sensorIdx] - SIM_PPO2_STEP >= -100.0))
	{
		simSensmVOffset[sensorIdx] -= SIM_PPO2_STEP;
	}
}