view Discovery/Inc/tHome.h @ 837:18946846b95b Evo_2_23

Bugfixes and code cleanup for BF views: BF views gauge and apnoe were using "dive computer" T3 view functions which caused some problem because these legacy views were not intended to work with customer view selection. A switch condition has been added to skip these kind of functions in case a design other T3 is in use. Another potential problem was that there were two definitions for T3 and T7 views which were basically the same. If they wold not be the same the switching functionality wold not work properly. To avoid this problem in futur the arrays have been merged => the view are handled sing the (newer) cv_view arrays instead of the standard_views which were in used before the user could the views which should be shown.
author ideenmodellierer
date Wed, 27 Dec 2023 19:37:17 +0100
parents 7322adb00305
children
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Inc/tHome.h
/// \brief  Control for Surface and Dive Templates
/// \author heinrichs weikamp gmbh
/// \date   10-November-2014
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef THOME_H
#define THOME_H

/* Includes ------------------------------------------------------------------*/

#include <stdio.h>
#include <string.h>
#include "stm32f4xx_hal.h"
#include "base.h"
#include "gfx.h"
#include "gfx_colors.h"
#include "gfx_engine.h"
#include "text_multilanguage.h"
#include "settings.h"
#include "data_central.h"
#include "data_exchange.h"
#include "check_warning.h"
#include "configuration.h"

extern const uint16_t BigFontSeperationLeftRight; // in t3.c
extern const uint16_t BigFontSeperationTopBottom; // in t3.c

#define MAX_AGE_DECOINFO_MS (120000)

enum EXTRADISPLAYS
{
		EXTRADISPLAY_none = 0,
		EXTRADISPLAY_BIGFONT,
		EXTRADISPLAY_BFACTIVE,
#ifdef HAVEDECOGAME
		EXTRADISPLAY_DECOGAME,
#endif
		EXTRADISPLAY_END
};

#define LEGACY_T3_START_ID_PRE_TIMER  (15u) /* Value == index of the first real T3 view before introduction of timer */
#define LEGACY_CV_END_POST_TIMER (15u)	/* Value CV_END in an intermediate version. Used to identify an indexing problem */

enum CUSTOMVIEWS
{
		CVIEW_noneOrDebug = 0,
		CVIEW_sensors,
		CVIEW_Compass,
		CVIEW_Decolist,
		CVIEW_Tissues,
		CVIEW_Profile,
		CVIEW_EADTime,
		CVIEW_Gaslist,
		CVIEW_sensors_mV,
		CVIEW_Hello,
		CVIEW_CompassDebug,
		CVIEW_SummaryOfLeftCorner,
		CVIEW_Charger,
		CVIEW_CcrSummary,
        CVIEW_Timer,
		CVIEW_END			/* The ID is used in shift operation => 31 is the max number of supported views */
};

enum CUSTOMVIEWS_BF
{
		CVIEW_T3_noneOrDebug = 0,
		CVIEW_T3_sensors,
		CVIEW_T3_Compass,
		CVIEW_T3_Decostop,
		CVIEW_T3_TTS,
		CVIEW_T3_MaxDepth,
		CVIEW_T3_ppO2andGas,
		CVIEW_T3_StopWatch,
		CVIEW_T3_GasList,
		CVIEW_T3_Temperature,
		CVIEW_T3_ApnoeSurfaceInfo,
		CVIEW_T3_Navigation,
		CVIEW_T3_DepthData,
		CVIEW_T3_DecoTTS,
#ifdef ENABLE_T3_PROFILE_VIEW
		CVIEW_T3_Profile,
#endif
		CVIEW_T3_END		/* The ID is used in shift operation => 31 is the max number of supported views */
};

// for custom view switch on/off 161122 hw
extern const uint8_t cv_changelist[];
extern const uint8_t cv_changelist_BS[];

#define CHECK_BIT_THOME(var,pos) (((var)>>(pos)) & 1)

typedef struct
{
	uint16_t Hours;
	uint16_t Minutes;
	uint16_t Seconds;
	uint32_t Total;

}	SDivetime;


typedef struct
{
	uint8_t Days;
	uint8_t Hours;
	uint8_t Minutes;
	uint8_t Seconds;
	uint32_t Total;
}	SSurfacetime;


extern _Bool warning_count_high_time;
extern _Bool display_count_high_time;
extern uint8_t errorsInSettings;


void tHome_init(void);
void tHome_refresh(void);
void tHome_sleepmode_fun(void);
void set_globalState_tHome(void);
void tHome_change_field_button_pressed(void);
void tHome_change_customview_button_pressed(uint8_t action);

void tHome_findNextStop(const uint16_t *list, uint8_t *depthOut, uint16_t *lengthOut);
void tHomeDiveMenuControl(uint8_t sendAction);
void tHome_tick(void);

uint8_t tHome_gas_writer(uint8_t oxygen_percentage, uint8_t helium_percentage, char *text);
uint32_t tHome_DateCode(RTC_DateTypeDef *dateInput);

void tHome_init_compass(void);
uint8_t tHome_getNumberOfAvailableCVs(const uint8_t* pcv_list);

float t3_basics_lines_depth_and_divetime(GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXl1, GFX_DrawCfgWindow* tXr1, uint8_t mode);
void t3_basics_battery_low_customview_extra(GFX_DrawCfgWindow* tXc1);
void t3_basics_show_customview_warnings(GFX_DrawCfgWindow* tXc1);
void t3_basics_refresh_customview(float depth, uint8_t tX_selection_customview, GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXc1, GFX_DrawCfgWindow* tXc2, uint8_t mode);
void t3_basics_refresh_apnoeRight(float depth, uint8_t tX_selection_customview, GFX_DrawCfgScreen *tXscreen, GFX_DrawCfgWindow* tXc1, GFX_DrawCfgWindow* tXc2, uint8_t mode);
//void _findNextStop(const uint16_t *list, uint8_t *depthOut, uint16_t *lengthOut);
void t3_basics_colorscheme_mod(char *text);
void t3_basics_change_customview(uint8_t *tX_selection_customview, const uint8_t *tX_customviews, uint8_t action);

uint8_t tHome_show_lost_connection_count(GFX_DrawCfgScreen *ScreenToWriteOn);

#endif /* THOME_H */