view Discovery/Inc/motion.h @ 837:18946846b95b Evo_2_23

Bugfixes and code cleanup for BF views: BF views gauge and apnoe were using "dive computer" T3 view functions which caused some problem because these legacy views were not intended to work with customer view selection. A switch condition has been added to skip these kind of functions in case a design other T3 is in use. Another potential problem was that there were two definitions for T3 and T7 views which were basically the same. If they wold not be the same the switching functionality wold not work properly. To avoid this problem in futur the arrays have been merged => the view are handled sing the (newer) cv_view arrays instead of the standard_views which were in used before the user could the views which should be shown.
author ideenmodellierer
date Wed, 27 Dec 2023 19:37:17 +0100
parents c737cf5d9067
children
line wrap: on
line source

/*
 * motion.h
 *
 *  Created on: 20.05.2019
 *      Author: Thorsten Sonntag
 */

#ifndef INC_MOTION_H_
#define INC_MOTION_H_


/* exported data types */
#define CUSTOMER_DEFINED_VIEWS	(100u)	/* value will cause the function to detect the number of selected views */
#define CUSTOMER_KEEP_LAST_SECTORS	(200u)	/* do not update number of sectors, just define the new center position */

#define MOTION_ENABLE_ROLL	(0x01u)
#define MOTION_ENABLE_PITCH	(0x02u)
#define MOTION_ENABLE_YAW	(0x04u)
#define MOTION_ENABLE_ALL	(MOTION_ENABLE_ROLL | MOTION_ENABLE_PITCH | MOTION_ENABLE_YAW)

typedef enum
{
		MOTION_DETECT_OFF = 0,
		MOTION_DETECT_SECTOR,
		MOTION_DETECT_MOVE,
		MOTION_DETECT_SCROLL,
		MOTION_DETECT_END
} MotionDetectMethod_t;

typedef enum
{
		DETECT_START = 0,
		DETECT_POS_MOVE,
		DETECT_MAXIMA,
		DETECT_FALLBACK,
		DETECT_POS_PITCH,
		DETECT_NEG_MOVE,
		DETECT_MINIMA,
		DETECT_RISEBACK,
		DETECT_NEG_PITCH,
		DETECT_NOTHING
} detectionState_t;

typedef struct
{
    float upperborder;			/* current sector is changed if pitch exceeds these borders */
    float lowerborder;

    uint8_t current;			/* number of the current visible sector */
    uint8_t target;				/* used for sector switch => number of the sector which shall be finnaly displayed */

    float offset;				/* offset to adjust minimum pitch value used for detection to zero */
    float size;					/* delta of upper and lower boarder defining the sector in degree */
    float window;				/* defines which range of pitch values are used for detection */
    float center;				/* defines the offset from pitch to middle of active sector (avoid center position is close to the calculated borders) */
    uint8_t count;				/* number of sectors used for detection */
} SSector;

typedef struct
{
	float x;
	float y;
	float z;
} SCoord;

typedef enum
{
		MOTION_HISTORY_ROLL = 0,
		MOTION_HISTORY_PITCH,
		MOTION_HISTORY_YAW
} MotionHistoryEntry_t;

typedef struct
{
	uint8_t roll;
	uint8_t pitch;
	uint8_t yaw;
} SDeltaHistory;

void InitMotionDetection(void);
void suspendMotionDetection(uint8_t seconds);
void HandleMotionDetection(void);
void resetMotionDeltaHistory();
void evaluateMotionDelta(float roll, float pitch, float yaw);
void DefineSectorCount(uint8_t numOfSectors);
void MapCVToSector(void);
detectionState_t detectPitch(float currentPitch);
detectionState_t detectSectorButtonEvent(float focusOffset);
detectionState_t detectScrollButtonEvent(float focusOffset);

void anglesToCoord(float roll, float pitch, float yaw, SCoord *pCoord);
void calibrateViewport(float roll, float pitch, float yaw);
float checkViewport(float roll, float pitch, float yaw, uint8_t enableAxis);
uint8_t viewInFocus(void);
uint8_t viewDetectionSuspended(void);
void resetFocusState(void);

#endif /* INC_MOTION_H_ */