Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 706:10b7d271b9c4
Bugfix: only reset menu if a new sub menu is created:
In the previous version a short black screen (blink) happend while changing parameters. Root cause was that the menu structure was reset while no submenu was created because the value update happend at the actual menu. This has been fixed by only resetting the menu if it is really needed
author | Ideenmodellierer |
---|---|
date | Thu, 03 Nov 2022 20:37:06 +0100 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit