Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h @ 892:0e084e5554a8 Evo_2_23
Smal modification slow exit counter:
The slow exit counter is not only activated if deco obligations have been completed and if the dive time is longer than 15 minutes.
author | ideenmodellierer |
---|---|
date | Tue, 10 Sep 2024 21:18:36 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_tim_ex.h * @author MCD Application Team * @brief Header file of TIM HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_TIM_EX_H #define __STM32F4xx_HAL_TIM_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup TIMEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup TIMEx_Exported_Types TIM Exported Types * @{ */ /** * @brief TIM Hall sensor Configuration Structure definition */ typedef struct { uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. This parameter can be a value of @ref TIM_Input_Capture_Polarity */ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ uint32_t IC1Filter; /*!< Specifies the input capture filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000U and Max_Data = 0xFFFFU */ } TIM_HallSensor_InitTypeDef; /** * @brief TIM Master configuration Structure definition */ typedef struct { uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection. This parameter can be a value of @ref TIM_Master_Mode_Selection */ uint32_t MasterSlaveMode; /*!< Master/slave mode selection. This parameter can be a value of @ref TIM_Master_Slave_Mode */ }TIM_MasterConfigTypeDef; /** * @brief TIM Break and Dead time configuration Structure definition */ typedef struct { uint32_t OffStateRunMode; /*!< TIM off state in run mode. This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode. This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ uint32_t LockLevel; /*!< TIM Lock level. This parameter can be a value of @ref TIM_Lock_level */ uint32_t DeadTime; /*!< TIM dead Time. This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ uint32_t BreakState; /*!< TIM Break State. This parameter can be a value of @ref TIM_Break_Input_enable_disable */ uint32_t BreakPolarity; /*!< TIM Break input polarity. This parameter can be a value of @ref TIM_Break_Polarity */ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state. This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ }TIM_BreakDeadTimeConfigTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup TIMEx_Exported_Constants TIM Exported Constants * @{ */ /** @defgroup TIMEx_Remap TIM Remap * @{ */ #define TIM_TIM2_TIM8_TRGO 0x00000000U #define TIM_TIM2_ETH_PTP 0x00000400U #define TIM_TIM2_USBFS_SOF 0x00000800U #define TIM_TIM2_USBHS_SOF 0x00000C00U #define TIM_TIM5_GPIO 0x00000000U #define TIM_TIM5_LSI 0x00000040U #define TIM_TIM5_LSE 0x00000080U #define TIM_TIM5_RTC 0x000000C0U #define TIM_TIM11_GPIO 0x00000000U #define TIM_TIM11_HSE 0x00000002U #if defined(STM32F413xx) || defined(STM32F423xx) #define TIM_TIM9_TIM3_TRGO 0x10000000U #define TIM_TIM9_LPTIM 0x10000010U #define TIM_TIM5_TIM3_TRGO 0x10000000U #define TIM_TIM5_LPTIM 0x10000008U #define TIM_TIM1_TIM3_TRGO 0x10000000U #define TIM_TIM1_LPTIM 0x10000004U #endif /* STM32F413xx | STM32F423xx */ #if defined (STM32F446xx) #define TIM_TIM11_SPDIFRX 0x00000001U #endif /* STM32F446xx */ /** * @} */ #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) /** @defgroup TIMEx_SystemBreakInput TIM System Break Input * @{ */ #define TIM_SYSTEMBREAKINPUT_HARDFAULT 0x00000001U /* Core Lockup lock output(Hardfault) is connected to Break Input of TIM1 and TIM8 */ #define TIM_SYSTEMBREAKINPUT_PVD 0x00000004U /* PVD Interrupt is connected to Break Input of TIM1 and TIM8 */ #define TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD 0x00000005U /* Core Lockup lock output(Hardfault) and PVD Interrupt are connected to Break Input of TIM1 and TIM8 */ /** * @} */ #endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup TIMEx_Exported_Functions * @{ */ /** @addtogroup TIMEx_Exported_Functions_Group1 * @{ */ /* Timer Hall Sensor functions **********************************************/ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig); HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim); void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim); void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim); /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group2 * @{ */ /* Timer Complementary Output Compare functions *****************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group3 * @{ */ /* Timer Complementary PWM functions ****************************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length); HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group4 * @{ */ /* Timer Complementary One Pulse functions **********************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel); HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel); HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group5 * @{ */ /* Extension Control functions ************************************************/ HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig); HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group6 * @{ */ /* Extension Callback *********************************************************/ void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim); void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim); void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); /** * @} */ /** @addtogroup TIMEx_Exported_Functions_Group7 * @{ */ /* Extension Peripheral State functions **************************************/ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @defgroup TIMEx_Private_Macros TIM Private Macros * @{ */ #if defined (STM32F446xx) #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\ ((TIM_REMAP) == TIM_TIM5_GPIO)||\ ((TIM_REMAP) == TIM_TIM5_LSI)||\ ((TIM_REMAP) == TIM_TIM5_LSE)||\ ((TIM_REMAP) == TIM_TIM5_RTC)||\ ((TIM_REMAP) == TIM_TIM11_GPIO)||\ ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\ ((TIM_REMAP) == TIM_TIM11_HSE)) #elif defined(STM32F413xx) || defined(STM32F423xx) #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\ ((TIM_REMAP) == TIM_TIM5_GPIO)||\ ((TIM_REMAP) == TIM_TIM5_LSI)||\ ((TIM_REMAP) == TIM_TIM5_LSE)||\ ((TIM_REMAP) == TIM_TIM5_RTC)||\ ((TIM_REMAP) == TIM_TIM11_GPIO)||\ ((TIM_REMAP) == TIM_TIM11_HSE)||\ ((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)||\ ((TIM_REMAP) == TIM_TIM9_LPTIM)||\ ((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)||\ ((TIM_REMAP) == TIM_TIM5_LPTIM)||\ ((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)||\ ((TIM_REMAP) == TIM_TIM1_LPTIM)) #else #define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\ ((TIM_REMAP) == TIM_TIM5_GPIO)||\ ((TIM_REMAP) == TIM_TIM5_LSI)||\ ((TIM_REMAP) == TIM_TIM5_LSE)||\ ((TIM_REMAP) == TIM_TIM5_RTC)||\ ((TIM_REMAP) == TIM_TIM11_GPIO)||\ ((TIM_REMAP) == TIM_TIM11_HSE)) #endif /* STM32F446xx */ #if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx) #define IS_TIM_SYSTEMBREAKINPUT(BREAKINPUT) (((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT)||\ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_PVD)||\ ((BREAKINPUT) == TIM_SYSTEMBREAKINPUT_HARDFAULT_PVD)) #endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */ #define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup TIMEx_Private_Functions TIM Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_TIM_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/