view ostc4pack/src/checksum_final_add_fletcher.cpp @ 580:08af5d707c5a

Bugfix bad resolution of compass LSM303AGR: The values of the variant LSM303AGR were more instabled compared to other variants. Root cause was that low power and high resolution are set in different registers and both options were enabled what is an invalid configuration => most likely the request for high resolution was ignored. To fix this the low power mode is only set in sleep and the high resolution is used in normal operation => compass performance same as in other variants.
author Ideenmodellierer
date Sat, 12 Dec 2020 19:16:37 +0100
parents 1e707b34667e
children 01f40cb1057e
line wrap: on
line source

#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <time.h>

void fletcher16(unsigned char *result1, unsigned char *result2, unsigned char const *data, size_t bytes )
{
        unsigned short sum1 = 0xff, sum2 = 0xff;
        size_t tlen;
 
        while (bytes) {
                tlen = bytes >= 20 ? 20 : bytes;
                bytes -= tlen;
                do {
                        sum2 += sum1 += *data++;
                } while (--tlen);
                sum1 = (sum1 & 0xff) + (sum1 >> 8);
                sum2 = (sum2 & 0xff) + (sum2 >> 8);
        }
        /* Second reduction step to reduce sums to 8 bits */
        sum1 = (sum1 & 0xff) + (sum1 >> 8);
        sum2 = (sum2 & 0xff) + (sum2 >> 8);
        *result2 = (sum2 & 0xff);
        *result1 = (sum1 & 0xff);
//        return sum2 << 8 | sum1;
}


// This is a variant of fletcher16 with a 16 bit sum instead of an 8 bit sum,
// and modulo 2^16 instead of 2^16-1
void
hw_ostc3_firmware_checksum (unsigned char *result1, unsigned char *result2, unsigned char *result3, unsigned char *result4, unsigned char const *data, size_t bytes )
{
	unsigned short low = 0;
	unsigned short high = 0;
	for (unsigned int i = 0; i < bytes; i++) {
		low  += data[i];
		high += low;
	}
        *result1 = (low & 0xff);
        *result2 = (low/256 & 0xff);
        *result3 = (unsigned char)(high & 0xff);
        *result4 = (unsigned char)((high/256) & 0xff);
//	return (((unsigned int)high) << 16) + low;
}


int main(int argc, char** argv) {
	
	
	FILE *fp, * fpout;
	size_t lenTotal,lenTemp;
	unsigned char buf[2000000];
	char *file = argv[1];
	char *file2 =  argv[2];
	char *file3 =  argv[3];
	unsigned int pruefsumme;
	unsigned char buf2[4];

   	printf("1: %s\n",  file);
   	printf("2: %s\n",  file2);
   	printf("3: %s\n",  file3);
   	printf("\n");
     
	
		//write File with length and cheksum
	char filename[500], filenameout[510] ;
	sprintf(filename,"%s",file);
	int filelength = strlen(filename);
	filename[filelength -4] = 0;
	
	lenTotal = 0;
	if (NULL == (fp = fopen(file, "rb")))
	{
	    printf("Unable to open %s for reading\n", file);
	    return -1;
	}
	lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf), fp);
//	lenTemp = fread(buf, sizeof(char), sizeof(buf), fp);
	lenTotal = lenTemp;
	printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
	fclose(fp);

	if(file2)
	{
		if (NULL == (fp = fopen(file2, "rb")))
		{
		    printf("Unable to open %s for reading\n", file2);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}
	if(file3)
	{
		if (NULL == (fp = fopen(file3, "rb")))
		{
		    printf("Unable to open %s for reading\n", file3);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}

   	printf("\n");
	printf("%d bytes read (hex: %#x ) total \n", lenTotal,lenTotal);

	time_t rawtime;
	time (&rawtime);
	struct tm *timeinfo;
	timeinfo = localtime(&rawtime);
	
//	sprintf(filenameout,"fwupdate_%s.bin",ctime(&rawtime));
	sprintf(filenameout,"OSTC4update_%02u%02u%02u.bin",timeinfo->tm_year-100,timeinfo->tm_mon+1,timeinfo->tm_mday);

    fpout = fopen(filenameout, "wb");     
    for(int i = 0;i <lenTotal;i++)
    {
    	if(fwrite(&buf[i],1,1,fpout) != 1)
     	printf("error writing\n");
	}
	
	hw_ostc3_firmware_checksum(&buf2[0],&buf2[1],&buf2[2],&buf2[3],buf,lenTotal);
	printf("checksum  %#x %#x %#x %#x\n", buf2[0],buf2[1], buf2[2], buf2[3]);
   	if(fwrite(&buf2[0],1,4,fpout) != 4)
    	printf("error writing checksum\n");
    ;
	fclose(fpout);
}