view Small_CPU/Src/batteryGasGauge.c @ 580:08af5d707c5a

Bugfix bad resolution of compass LSM303AGR: The values of the variant LSM303AGR were more instabled compared to other variants. Root cause was that low power and high resolution are set in different registers and both options were enabled what is an invalid configuration => most likely the request for high resolution was ignored. To fix this the low power mode is only set in sleep and the high resolution is used in normal operation => compass performance same as in other variants.
author Ideenmodellierer
date Sat, 12 Dec 2020 19:16:37 +0100
parents aa286a4926c2
children 1b995079c045
line wrap: on
line source

/**
  ******************************************************************************
  * @file    batteryGasGauge.c 
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    09-Dec-2014
  * @brief   LTC2942 Battery Gas Gauge
  *           
  @verbatim                 
  ============================================================================== 
                ##### stm32f4xx_hal_i2c.c modification #####
  ============================================================================== 
	The LTC2942 requires an repeated start condition without stop condition
	for data reception.
	
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */ 
/* Includes ------------------------------------------------------------------*/
#include <string.h>	/* memset */
#include "batteryGasGauge.h"
#include "baseCPU2.h"
#include "stm32f4xx_hal.h"
#include "i2c.h"

static float battery_f_voltage = 6.0;		/* max assumed voltage */
static float battery_f_charge_percent = 0;

#define BGG_BATTERY_OFFSET          (26123)  //; 65536-(3,35Ah/0,085mAh)
#define BGG_BATTERY_DIVIDER         (394)    //; 3,35Ah/0,085mAh/100 [%]

float get_voltage(void)
{
#ifdef OSTC_ON_DISCOVERY_HARDWARE
	return 3.0f;
#endif

	return battery_f_voltage;
}


float get_charge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return 100.0f;
	#endif
	
	return battery_f_charge_percent;
}


void init_battery_gas_gauge(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t buffer[2];
	buffer[0] = 0x01;

	// F8 = 11111000:
	// ADC auto mode (11)
	// Prescale M = 128 (111)
	// AL/CC pin disable (0)
	// Shutdown (0)
	buffer[1] = 0xF8;
	I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2);
}

uint8_t battery_gas_gauge_CheckConfigOK(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif

	uint8_t retval = 0;
	uint8_t bufferReceive[10];

	memset(bufferReceive,0,sizeof(bufferReceive));

	I2C_Master_Receive(DEVICE_BATTERYGAUGE, bufferReceive, 10);
	if(bufferReceive[1] == 0xf8)
	{
		retval = 1;
	}
	return retval;
}

static void disable_adc(void)
{
	uint8_t buffer[2];
	buffer[0] = 0x01;

	// according to the datasheet of the LTC2942, the adc shall
	// be disabled when writing to the gauge registers

	// 0xF9 = 11111001:
	// see init_battery_gas_gauge()
	// Shutdown (1)
	buffer[1] = 0xF9;
	I2C_Master_Transmit(DEVICE_BATTERYGAUGE, buffer, 2);
}


void battery_gas_gauge_get_data(void)
{
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	float battery_f_voltage_local;
	float battery_f_charge_percent_local;
	
	uint8_t bufferReceive[10];
	
	if(I2C_Master_Receive(DEVICE_BATTERYGAUGE, bufferReceive, 10) == HAL_OK)
	{
		battery_f_voltage_local =  (float)(bufferReceive[8] * 256);
		battery_f_voltage_local += (float)(bufferReceive[9]);
		battery_f_voltage_local *= (float)6 / (float)0xFFFF;
	
		// max/full: 0.085 mAh * 1 * 65535 = 5570 mAh
		battery_f_charge_percent_local =  (float)(bufferReceive[2] * 256);
		battery_f_charge_percent_local += (float)(bufferReceive[3]);
		battery_f_charge_percent_local -= BGG_BATTERY_OFFSET;		/* Because of the prescalar 128 the counter assumes a max value of 5570mAh => normalize to 3350mAh*/
		battery_f_charge_percent_local /= BGG_BATTERY_DIVIDER;		/* transform to percentage */

		if(battery_f_charge_percent_local < 0)
			battery_f_charge_percent_local = 0;

		battery_f_voltage = battery_f_voltage_local;
		battery_f_charge_percent = battery_f_charge_percent_local;
	}
}


void battery_gas_gauge_set_charge_full(void)
{
	disable_adc();
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = 0xFF;
	bufferSend[2] = 0xFF;
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
	init_battery_gas_gauge();
}


void battery_gas_gauge_set(float percentage)
{

	disable_adc();
	#ifdef OSTC_ON_DISCOVERY_HARDWARE
		return;
	#endif

	uint16_t mAhSend;
	
	if(percentage >= 100)
		mAhSend = 0xFFFF;
	else {
		mAhSend = (percentage * BGG_BATTERY_DIVIDER) + BGG_BATTERY_OFFSET;
	}
	
	uint8_t bufferSend[3];
	bufferSend[0] = 0x02;
	bufferSend[1] = (uint8_t)(mAhSend / 256);
	bufferSend[2] = (uint8_t)(mAhSend & 0xFF);
	I2C_Master_Transmit(  DEVICE_BATTERYGAUGE, bufferSend, 3);
	init_battery_gas_gauge();
}


/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/