Mercurial > public > ostc4
view OtherSources/data_exchange_main_mini.c @ 580:08af5d707c5a
Bugfix bad resolution of compass LSM303AGR:
The values of the variant LSM303AGR were more instabled compared to other variants. Root cause was that low power and high resolution are set in different registers and both options were enabled what is an invalid configuration => most likely the request for high resolution was ignored. To fix this the low power mode is only set in sleep and the high resolution is used in normal operation => compass performance same as in other variants.
author | Ideenmodellierer |
---|---|
date | Sat, 12 Dec 2020 19:16:37 +0100 |
parents | 7801c5d8a562 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file data_exchange_main.c * @author heinrichs weikamp gmbh * @date 13-Oct-2014 * @version V0.0.2 * @since 27-May-2015 * @brief Communication with the second CPU == RTE system * @verbatim ============================================================================== ##### How to use ##### ============================================================================== ============================================================================== ##### Device Data ##### ============================================================================== main CPU always sends the device data info that it has at the moment on start it is INT32_MIN, INT32_MAX and 0 as initialized in data_central.c variable declaration second small CPU gets request to send its device data on receiption the data is merged with the data in externLogbookFlash, stored on the externLogbookFlash and from now on send to small CPU @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include <string.h> // for memcopy #include "stm32f4xx_hal.h" #include "stdio.h" #include "ostc.h" #include "data_central.h" #include "data_exchange_main.h" #include "base.h" #include "externLogbookFlash.h" /* Expoted variables --------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ SDataReceiveFromMaster dataOut; SDataExchangeSlaveToMaster dataIn; uint8_t data_old__lost_connection_to_slave_counter_temp = 0; /* Private types -------------------------------------------------------------*/ uint8_t DataEX_check_header_and_footer_ok(void); void DataEX_control_connection_while_asking_for_sleep(void); /* Exported functions --------------------------------------------------------*/ uint8_t DataEX_call(void) { DataEX_control_connection_while_asking_for_sleep(); for(int i=0;i<EXCHANGE_BUFFERSIZE;i++) *(uint8_t *)(((uint32_t)&dataOut) + i) = 0; dataOut.mode = MODE_SHUTDOWN; dataOut.header.checkCode[0] = 0xBB; dataOut.header.checkCode[1] = 0x01; dataOut.header.checkCode[2] = 0x01; dataOut.header.checkCode[3] = 0xBB; dataOut.footer.checkCode[0] = 0xF4; dataOut.footer.checkCode[1] = 0xF3; dataOut.footer.checkCode[2] = 0xF2; dataOut.footer.checkCode[3] = 0xF1; HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); delayMicros(10); if(data_old__lost_connection_to_slave_counter_temp >= 3) { data_old__lost_connection_to_slave_counter_temp = 0; } else { HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); } HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)&dataOut, (uint8_t *)&dataIn, EXCHANGE_BUFFERSIZE+1); return 1; } void DataEX_control_connection_while_asking_for_sleep(void) { if(!DataEX_check_header_and_footer_ok()) { data_old__lost_connection_to_slave_counter_temp += 1; } } uint8_t DataEX_check_header_and_footer_ok(void) { if(dataIn.header.checkCode[0] != 0xA1) return 0; if(dataIn.header.checkCode[1] != 0xA2) return 0; if(dataIn.header.checkCode[2] != 0xA3) return 0; if(dataIn.header.checkCode[3] != 0xA4) return 0; if(dataIn.footer.checkCode[0] != 0xE1) return 0; if(dataIn.footer.checkCode[1] != 0xE2) return 0; if(dataIn.footer.checkCode[2] != 0xE3) return 0; if(dataIn.footer.checkCode[3] != 0xE4) return 0; return 1; }