Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_DRIVER_v120/Inc/stm32f4xx_hal_adc.h @ 73:06cfc7457c9e
Add definitions for Fonts to be placed in upper flash
author | Ideenmodellierer |
---|---|
date | Thu, 04 Oct 2018 20:40:21 +0200 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_adc.h * @author MCD Application Team * @version V1.2.0 * @date 26-December-2014 * @brief Header file of ADC HAL extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_ADC_H #define __STM32F4xx_ADC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup ADC * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup ADC_Exported_Types ADC Exported Types * @{ */ /** * @brief HAL State structures definition */ typedef enum { HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */ HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */ }HAL_ADC_StateTypeDef; /** * @brief ADC Init structure definition */ typedef struct { uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for all the ADCs. This parameter can be a value of @ref ADC_ClockPrescaler */ uint32_t Resolution; /*!< Configures the ADC resolution dual mode. This parameter can be a value of @ref ADC_Resolution */ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right. This parameter can be a value of @ref ADC_data_align */ uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or Single (one channel) mode. This parameter can be set to ENABLE or DISABLE */ uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set at the end of single channel conversion or at the end of all conversions. This parameter can be a value of @ref ADC_EOCSelection */ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE. */ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode. This parameter can be set to ENABLE or DISABLE. */ uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for regular channel group. This parameter must be a number between Min_Data = 1 and Max_Data = 16. */ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not for regular channels. This parameter can be set to ENABLE or DISABLE. */ uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done using the sequencer for regular channel group. This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ uint32_t ExternalTrigConvEdge; /*!< Select the external trigger edge and enable the trigger of a regular group. This parameter can be a value of @ref ADC_External_trigger_edge_Regular */ uint32_t ExternalTrigConv; /*!< Select the external event used to trigger the start of conversion of a regular group. This parameter can be a value of @ref ADC_External_trigger_Source_Regular */ }ADC_InitTypeDef; /** * @brief ADC handle Structure definition */ typedef struct { ADC_TypeDef *Instance; /*!< Register base address */ ADC_InitTypeDef Init; /*!< ADC required parameters */ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ HAL_LockTypeDef Lock; /*!< ADC locking object */ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */ __IO uint32_t ErrorCode; /*!< ADC Error code */ }ADC_HandleTypeDef; /** * @brief ADC Configuration regular Channel structure definition */ typedef struct { uint32_t Channel; /*!< The ADC channel to configure. This parameter can be a value of @ref ADC_channels */ uint32_t Rank; /*!< The rank in the regular group sequencer. This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel. This parameter can be a value of @ref ADC_sampling_times */ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */ }ADC_ChannelConfTypeDef; /** * @brief ADC Configuration multi-mode structure definition */ typedef struct { uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode. This parameter can be a value of @ref ADC_analog_watchdog_selection */ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. This parameter must be a 12-bit value. */ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. This parameter must be a 12-bit value. */ uint32_t Channel; /*!< Configures ADC channel for the analog watchdog. This parameter has an effect only if watchdog mode is configured on single channel This parameter can be a value of @ref ADC_channels */ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured is interrupt mode or in polling mode. This parameter can be set to ENABLE or DISABLE */ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */ }ADC_AnalogWDGConfTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup ADC_Exported_Constants ADC Exported Constants * @{ */ /** @defgroup ADC_Error_Code ADC Error Code * @{ */ #define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */ #define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */ #define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */ /** * @} */ /** @defgroup ADC_ClockPrescaler ADC Clock Prescaler * @{ */ #define ADC_CLOCKPRESCALER_PCLK_DIV2 ((uint32_t)0x00000000) #define ADC_CLOCKPRESCALER_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0) #define ADC_CLOCKPRESCALER_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1) #define ADC_CLOCKPRESCALER_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE) /** * @} */ /** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases * @{ */ #define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000) #define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0) #define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1) #define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2) #define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) #define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3) #define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1)) #define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2)) #define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) #define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) #define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY) /** * @} */ /** @defgroup ADC_Resolution ADC Resolution * @{ */ #define ADC_RESOLUTION_12B ((uint32_t)0x00000000) #define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0) #define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1) #define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES) /** * @} */ /** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular * @{ */ #define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000) #define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0) #define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1) #define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN) /** * @} */ /** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular * @{ */ #define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000) #define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0) #define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1) #define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2) #define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) #define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3) #define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1)) #define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2)) #define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) #define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) #define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL) /** * @} */ /** @defgroup ADC_data_align ADC Data Align * @{ */ #define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000) #define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN) /** * @} */ /** @defgroup ADC_channels ADC Common Channels * @{ */ #define ADC_CHANNEL_0 ((uint32_t)0x00000000) #define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0) #define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1) #define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2) #define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) #define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3) #define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1)) #define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2)) #define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) #define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4) #define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0)) #define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1)) #define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17) #define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18) /** * @} */ /** @defgroup ADC_sampling_times ADC Sampling Times * @{ */ #define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000) #define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0) #define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1) #define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0)) #define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2) #define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0)) #define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1)) #define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10) /** * @} */ /** @defgroup ADC_EOCSelection ADC EOC Selection * @{ */ #define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000) #define ADC_EOC_SINGLE_CONV ((uint32_t)0x00000001) #define ADC_EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */ /** * @} */ /** @defgroup ADC_Event_type ADC Event Type * @{ */ #define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) #define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /** * @} */ /** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection * @{ */ #define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN)) #define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN)) #define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) #define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN) #define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN) #define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) #define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000) /** * @} */ /** @defgroup ADC_interrupts_definition ADC Interrupts Definition * @{ */ #define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE) #define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE) #define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE) #define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE) /** * @} */ /** @defgroup ADC_flags_definition ADC Flags Definition * @{ */ #define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD) #define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC) #define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC) #define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT) #define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT) #define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR) /** * @} */ /** @defgroup ADC_channels_type ADC Channels Type * @{ */ #define ADC_ALL_CHANNELS ((uint32_t)0x00000001) #define ADC_REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */ #define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup ADC_Exported_Macros ADC Exported Macros * @{ */ /** @brief Reset ADC handle state * @param __HANDLE__: ADC handle * @retval None */ #define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET) /** * @brief Enable the ADC peripheral. * @param __HANDLE__: ADC handle * @retval None */ #define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON) /** * @brief Disable the ADC peripheral. * @param __HANDLE__: ADC handle * @retval None */ #define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON) /** * @brief Enable the ADC end of conversion interrupt. * @param __HANDLE__: specifies the ADC Handle. * @param __INTERRUPT__: ADC Interrupt. * @retval None */ #define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__)) /** * @brief Disable the ADC end of conversion interrupt. * @param __HANDLE__: specifies the ADC Handle. * @param __INTERRUPT__: ADC interrupt. * @retval None */ #define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__)) /** @brief Check if the specified ADC interrupt source is enabled or disabled. * @param __HANDLE__: specifies the ADC Handle. * @param __INTERRUPT__: specifies the ADC interrupt source to check. * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** * @brief Clear the ADC's pending flags. * @param __HANDLE__: specifies the ADC Handle. * @param __FLAG__: ADC flag. * @retval None */ #define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__)) /** * @brief Get the selected ADC's flag status. * @param __HANDLE__: specifies the ADC Handle. * @param __FLAG__: ADC flag. * @retval None */ #define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) /** * @} */ /* Include ADC HAL Extension module */ #include "stm32f4xx_hal_adc_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup ADC_Exported_Functions * @{ */ /** @addtogroup ADC_Exported_Functions_Group1 * @{ */ /* Initialization/de-initialization functions ***********************************/ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); /** * @} */ /** @addtogroup ADC_Exported_Functions_Group2 * @{ */ /* I/O operation functions ******************************************************/ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); /** * @} */ /** @addtogroup ADC_Exported_Functions_Group3 * @{ */ /* Peripheral Control functions *************************************************/ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); /** * @} */ /** @addtogroup ADC_Exported_Functions_Group4 * @{ */ /* Peripheral State functions ***************************************************/ HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc); uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup ADC_Private_Constants ADC Private Constants * @{ */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup ADC_Private_Macros ADC Private Macros * @{ */ #define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8)) #define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \ ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES)) #define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ ((RESOLUTION) == ADC_RESOLUTION_10B) || \ ((RESOLUTION) == ADC_RESOLUTION_8B) || \ ((RESOLUTION) == ADC_RESOLUTION_6B)) #define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING)) #define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)) #define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ ((ALIGN) == ADC_DATAALIGN_LEFT)) #define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ ((CHANNEL) == ADC_CHANNEL_1) || \ ((CHANNEL) == ADC_CHANNEL_2) || \ ((CHANNEL) == ADC_CHANNEL_3) || \ ((CHANNEL) == ADC_CHANNEL_4) || \ ((CHANNEL) == ADC_CHANNEL_5) || \ ((CHANNEL) == ADC_CHANNEL_6) || \ ((CHANNEL) == ADC_CHANNEL_7) || \ ((CHANNEL) == ADC_CHANNEL_8) || \ ((CHANNEL) == ADC_CHANNEL_9) || \ ((CHANNEL) == ADC_CHANNEL_10) || \ ((CHANNEL) == ADC_CHANNEL_11) || \ ((CHANNEL) == ADC_CHANNEL_12) || \ ((CHANNEL) == ADC_CHANNEL_13) || \ ((CHANNEL) == ADC_CHANNEL_14) || \ ((CHANNEL) == ADC_CHANNEL_15) || \ ((CHANNEL) == ADC_CHANNEL_16) || \ ((CHANNEL) == ADC_CHANNEL_17) || \ ((CHANNEL) == ADC_CHANNEL_18)) #define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \ ((TIME) == ADC_SAMPLETIME_15CYCLES) || \ ((TIME) == ADC_SAMPLETIME_28CYCLES) || \ ((TIME) == ADC_SAMPLETIME_56CYCLES) || \ ((TIME) == ADC_SAMPLETIME_84CYCLES) || \ ((TIME) == ADC_SAMPLETIME_112CYCLES) || \ ((TIME) == ADC_SAMPLETIME_144CYCLES) || \ ((TIME) == ADC_SAMPLETIME_480CYCLES)) #define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \ ((EOCSelection) == ADC_EOC_SEQ_CONV) || \ ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV)) #define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \ ((EVENT) == ADC_OVR_EVENT)) #define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \ ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE)) #define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \ ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \ ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS)) #define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF)) #define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16))) #define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16))) #define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8))) #define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \ ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \ (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \ (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \ (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= ((uint32_t)0x003F)))) /** * @brief Set ADC Regular channel sequence length. * @param _NbrOfConversion_: Regular channel sequence length. * @retval None */ #define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20) /** * @brief Set the ADC's sample time for channel numbers between 10 and 18. * @param _SAMPLETIME_: Sample time parameter. * @param _CHANNELNB_: Channel number. * @retval None */ #define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10))) /** * @brief Set the ADC's sample time for channel numbers between 0 and 9. * @param _SAMPLETIME_: Sample time parameter. * @param _CHANNELNB_: Channel number. * @retval None */ #define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_))))) /** * @brief Set the selected regular channel rank for rank between 1 and 6. * @param _CHANNELNB_: Channel number. * @param _RANKNB_: Rank number. * @retval None */ #define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1))) /** * @brief Set the selected regular channel rank for rank between 7 and 12. * @param _CHANNELNB_: Channel number. * @param _RANKNB_: Rank number. * @retval None */ #define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7))) /** * @brief Set the selected regular channel rank for rank between 13 and 16. * @param _CHANNELNB_: Channel number. * @param _RANKNB_: Rank number. * @retval None */ #define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13))) /** * @brief Enable ADC continuous conversion mode. * @param _CONTINUOUS_MODE_: Continuous mode. * @retval None */ #define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1) /** * @brief Configures the number of discontinuous conversions for the regular group channels. * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions. * @retval None */ #define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << 13) /** * @brief Enable ADC scan mode. * @param _SCANCONV_MODE_: Scan conversion mode. * @retval None */ #define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8) /** * @brief Enable the ADC end of conversion selection. * @param _EOCSelection_MODE_: End of conversion selection mode. * @retval None */ #define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10) /** * @brief Enable the ADC DMA continuous request. * @param _DMAContReq_MODE_: DMA continuous request mode. * @retval None */ #define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9) /** * @brief Return resolution bits in CR1 register. * @param __HANDLE__: ADC handle * @retval None */ #define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES) /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup ADC_Private_Functions ADC Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /*__STM32F4xx_ADC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/