view Small_CPU/Src/i2c.c @ 173:05c770dc2911 max-depth

Bugfix: make max depth move with current depth (part 1) The display in dive mode of the max depth was updated before the actual depth, which looks very strange. The reason for this was conceptually simple. The depth value was averaged over a set of depth samples, but the current depth was only taken from the current sample. So, per definition, on an initial descend, the current depth is always bigger (deeper) than any average from previous shallower samples. This part 1 commit introduces a new function that is used immediate after reception of the new sample from the RTE. This function does the trivial average of a set of samples. Notice that also the surface and ambient mbar pressures are taken into account (which are used heavily over the entire code). This is a consistency thing. We should base any further calculation from the data presented in the UI, instead of presenting A, and use A' for further calculations. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Mon, 11 Mar 2019 19:48:57 +0100
parents e9cce686fe41
children 7e749084f347
line wrap: on
line source

#include "baseCPU2.h"
#include "i2c.h"
#include "scheduler.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/


//  ===============================================================================
//	I2C addresses - see i2c.h
//  ===============================================================================

I2C_HandleTypeDef I2cHandle;


/*
static void I2C_Error_Handler(void)
{
  while(1)
  {
  }
}
*/

HAL_StatusTypeDef I2C1_Status(void)
{
return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


GPIO_PinState HAL_I2C_Read_Data_PIN(void)
{
	return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN);
}

void HAL_I2C_Send_One_CLOCK(void)
{
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET);
	HAL_Delay(10);
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET);
	HAL_Delay(10);
}

GPIO_PinState MX_I2C1_TestAndClear(void)
{
	I2C_DeInit();
	HAL_I2C_ManualControl_MspInit();
	for(int i=0; i<9;i++)
	{
		if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET)
			HAL_I2C_Send_One_CLOCK();
		else
			break;
	}
	return HAL_I2C_Read_Data_PIN();
}

HAL_StatusTypeDef MX_I2C1_Init(void)
{
	I2cHandle.Instance             = I2Cx;
  I2cHandle.Init.AddressingMode  = I2C_ADDRESSINGMODE_7BIT;
  I2cHandle.Init.ClockSpeed      = 100000;//400000; REDUCED for compatibility with  HMC5583L + MMA8452Q
  I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
  I2cHandle.Init.DutyCycle       = I2C_DUTYCYCLE_2;
  I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
  I2cHandle.Init.NoStretchMode   = I2C_NOSTRETCH_DISABLED;
  I2cHandle.Init.OwnAddress1     = 0x01;
  
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle);
	HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED);
	HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F);



	global.dataSendToSlaveStopEval = 0;
	if(global.dataSendToSlavePending)
	{
		scheduleSpecial_Evaluate_DataSendToSlave();
	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


void I2C_DeInit(void)
{
	HAL_I2C_DeInit(&I2cHandle);
}


uint8_t i2c_errors = 0;

void I2C_Error_count(void)
{
	i2c_errors++;
}


HAL_StatusTypeDef I2C_Master_TransmitNoStop(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;
	
	global.dataSendToSlaveStopEval = 1;
	
  global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 100 /*FIXME , 0*/);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}
	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Transmit(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)(global.I2C_SystemStatus & 0x03);

	
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size,100 /*FIXME , 1*/);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Receive(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;

	uint8_t localHALstatusReturn = 0xFF;

	global.dataSendToSlaveStopEval = 1;

  localHALstatusReturn = HAL_I2C_Master_Receive(&I2cHandle, DevAddress,  pData, Size, 10);
	if(localHALstatusReturn != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}

	return (HAL_StatusTypeDef)localHALstatusReturn;
}