view Documentations/dump-disc.cfg @ 464:05c5c3d10902 Improve_Logtansfer

Added compile switch to handle additional data during raw header request: Beeside the pure header also the number of the last dive is of interested. Added compile switch to stay compatible with tools which might use the raw header command Added commands to support read and write acces to sample buffer
author ideenmodellierer
date Mon, 13 Apr 2020 16:00:54 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit