Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h @ 464:05c5c3d10902 Improve_Logtansfer
Added compile switch to handle additional data during raw header request:
Beeside the pure header also the number of the last dive is of interested. Added compile switch to stay compatible with tools which might use the raw header command
Added commands to support read and write acces to sample buffer
author | ideenmodellierer |
---|---|
date | Mon, 13 Apr 2020 16:00:54 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_ll_i2c.h * @author MCD Application Team * @brief Header file of I2C LL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_LL_I2C_H #define __STM32F4xx_LL_I2C_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" /** @addtogroup STM32F4xx_LL_Driver * @{ */ #if defined (I2C1) || defined (I2C2) || defined (I2C3) /** @defgroup I2C_LL I2C * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup I2C_LL_Private_Constants I2C Private Constants * @{ */ /* Defines used to perform compute and check in the macros */ #define LL_I2C_MAX_SPEED_STANDARD 100000U #define LL_I2C_MAX_SPEED_FAST 400000U /** * @} */ /* Private macros ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup I2C_LL_Private_Macros I2C Private Macros * @{ */ /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup I2C_LL_ES_INIT I2C Exported Init structure * @{ */ typedef struct { uint32_t PeripheralMode; /*!< Specifies the peripheral mode. This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */ uint32_t ClockSpeed; /*!< Specifies the clock frequency. This parameter must be set to a value lower than 400kHz (in Hz) This feature can be modified afterwards using unitary function @ref LL_I2C_SetClockPeriod() or @ref LL_I2C_SetDutyCycle() or @ref LL_I2C_SetClockSpeedMode() or @ref LL_I2C_ConfigSpeed(). */ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. This parameter can be a value of @ref I2C_LL_EC_DUTYCYCLE This feature can be modified afterwards using unitary function @ref LL_I2C_SetDutyCycle(). */ #if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ uint32_t DigitalFilter; /*!< Configures the digital noise filter. This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */ #endif uint32_t OwnAddress1; /*!< Specifies the device own address 1. This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */ uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1 This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ } LL_I2C_InitTypeDef; /** * @} */ #endif /*USE_FULL_LL_DRIVER*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup I2C_LL_Exported_Constants I2C Exported Constants * @{ */ /** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines * @brief Flags defines which can be used with LL_I2C_ReadReg function * @{ */ #define LL_I2C_SR1_SB I2C_SR1_SB /*!< Start Bit (master mode) */ #define LL_I2C_SR1_ADDR I2C_SR1_ADDR /*!< Address sent (master mode) or Address matched flag (slave mode) */ #define LL_I2C_SR1_BTF I2C_SR1_BTF /*!< Byte Transfer Finished flag */ #define LL_I2C_SR1_ADD10 I2C_SR1_ADD10 /*!< 10-bit header sent (master mode) */ #define LL_I2C_SR1_STOPF I2C_SR1_STOPF /*!< Stop detection flag (slave mode) */ #define LL_I2C_SR1_RXNE I2C_SR1_RXNE /*!< Data register not empty (receivers) */ #define LL_I2C_SR1_TXE I2C_SR1_TXE /*!< Data register empty (transmitters) */ #define LL_I2C_SR1_BERR I2C_SR1_BERR /*!< Bus error */ #define LL_I2C_SR1_ARLO I2C_SR1_ARLO /*!< Arbitration lost */ #define LL_I2C_SR1_AF I2C_SR1_AF /*!< Acknowledge failure flag */ #define LL_I2C_SR1_OVR I2C_SR1_OVR /*!< Overrun/Underrun */ #define LL_I2C_SR1_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ #define LL_I2C_SR1_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ #define LL_I2C_SR1_SMALERT I2C_ISR_SMALERT /*!< SMBus alert (SMBus mode) */ #define LL_I2C_SR2_MSL I2C_SR2_MSL /*!< Master/Slave flag */ #define LL_I2C_SR2_BUSY I2C_SR2_BUSY /*!< Bus busy flag */ #define LL_I2C_SR2_TRA I2C_SR2_TRA /*!< Transmitter/receiver direction */ #define LL_I2C_SR2_GENCALL I2C_SR2_GENCALL /*!< General call address (Slave mode) */ #define LL_I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT /*!< SMBus Device default address (Slave mode) */ #define LL_I2C_SR2_SMBHOST I2C_SR2_SMBHOST /*!< SMBus Host address (Slave mode) */ #define LL_I2C_SR2_DUALF I2C_SR2_DUALF /*!< Dual flag (Slave mode) */ /** * @} */ /** @defgroup I2C_LL_EC_IT IT Defines * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions * @{ */ #define LL_I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN /*!< Events interrupts enable */ #define LL_I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN /*!< Buffer interrupts enable */ #define LL_I2C_CR2_ITERREN I2C_CR2_ITERREN /*!< Error interrupts enable */ /** * @} */ #if defined(I2C_FLTR_ANOFF) /** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection * @{ */ #define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ #define LL_I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF /*!< Analog filter is disabled.*/ /** * @} */ #endif /** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length * @{ */ #define LL_I2C_OWNADDRESS1_7BIT 0x00004000U /*!< Own address 1 is a 7-bit address. */ #define LL_I2C_OWNADDRESS1_10BIT (uint32_t)(I2C_OAR1_ADDMODE | 0x00004000U) /*!< Own address 1 is a 10-bit address. */ /** * @} */ /** @defgroup I2C_LL_EC_DUTYCYCLE Fast Mode Duty Cycle * @{ */ #define LL_I2C_DUTYCYCLE_2 0x00000000U /*!< I2C fast mode Tlow/Thigh = 2 */ #define LL_I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY /*!< I2C fast mode Tlow/Thigh = 16/9 */ /** * @} */ /** @defgroup I2C_LL_EC_CLOCK_SPEED_MODE Master Clock Speed Mode * @{ */ #define LL_I2C_CLOCK_SPEED_STANDARD_MODE 0x00000000U /*!< Master clock speed range is standard mode */ #define LL_I2C_CLOCK_SPEED_FAST_MODE I2C_CCR_FS /*!< Master clock speed range is fast mode */ /** * @} */ /** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode * @{ */ #define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ #define LL_I2C_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP) /*!< SMBus Host address acknowledge */ #define LL_I2C_MODE_SMBUS_DEVICE I2C_CR1_SMBUS /*!< SMBus Device default mode (Default address not acknowledge) */ #define LL_I2C_MODE_SMBUS_DEVICE_ARP (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_ENARP) /*!< SMBus Device Default address acknowledge */ /** * @} */ /** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation * @{ */ #define LL_I2C_ACK I2C_CR1_ACK /*!< ACK is sent after current received byte. */ #define LL_I2C_NACK 0x00000000U /*!< NACK is sent after current received byte.*/ /** * @} */ /** @defgroup I2C_LL_EC_DIRECTION Read Write Direction * @{ */ #define LL_I2C_DIRECTION_WRITE I2C_SR2_TRA /*!< Bus is in write transfer */ #define LL_I2C_DIRECTION_READ 0x00000000U /*!< Bus is in read transfer */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup I2C_LL_Exported_Macros I2C Exported Macros * @{ */ /** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros * @{ */ /** * @brief Write a value in I2C register * @param __INSTANCE__ I2C Instance * @param __REG__ Register to be written * @param __VALUE__ Value to be written in the register * @retval None */ #define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) /** * @brief Read a value in I2C register * @param __INSTANCE__ I2C Instance * @param __REG__ Register to be read * @retval Register value */ #define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) /** * @} */ /** @defgroup I2C_LL_EM_Exported_Macros_Helper Exported_Macros_Helper * @{ */ /** * @brief Convert Peripheral Clock Frequency in Mhz. * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). * @retval Value of peripheral clock (in Mhz) */ #define __LL_I2C_FREQ_HZ_TO_MHZ(__PCLK__) (uint32_t)((__PCLK__)/1000000U) /** * @brief Convert Peripheral Clock Frequency in Hz. * @param __PCLK__ This parameter must be a value of peripheral clock (in Mhz). * @retval Value of peripheral clock (in Hz) */ #define __LL_I2C_FREQ_MHZ_TO_HZ(__PCLK__) (uint32_t)((__PCLK__)*1000000U) /** * @brief Compute I2C Clock rising time. * @param __FREQRANGE__ This parameter must be a value of peripheral clock (in Mhz). * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). * @retval Value between Min_Data=0x02 and Max_Data=0x3F */ #define __LL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) /** * @brief Compute Speed clock range to a Clock Control Register (I2C_CCR_CCR) value. * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). * @param __DUTYCYCLE__ This parameter can be one of the following values: * @arg @ref LL_I2C_DUTYCYCLE_2 * @arg @ref LL_I2C_DUTYCYCLE_16_9 * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. */ #define __LL_I2C_SPEED_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD)? \ (__LL_I2C_SPEED_STANDARD_TO_CCR((__PCLK__), (__SPEED__))) : \ (__LL_I2C_SPEED_FAST_TO_CCR((__PCLK__), (__SPEED__), (__DUTYCYCLE__)))) /** * @brief Compute Speed Standard clock range to a Clock Control Register (I2C_CCR_CCR) value. * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). * @param __SPEED__ This parameter must be a value lower than 100kHz (in Hz). * @retval Value between Min_Data=0x004 and Max_Data=0xFFF. */ #define __LL_I2C_SPEED_STANDARD_TO_CCR(__PCLK__, __SPEED__) (uint32_t)(((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) /** * @brief Compute Speed Fast clock range to a Clock Control Register (I2C_CCR_CCR) value. * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). * @param __SPEED__ This parameter must be a value between Min_Data=100Khz and Max_Data=400Khz (in Hz). * @param __DUTYCYCLE__ This parameter can be one of the following values: * @arg @ref LL_I2C_DUTYCYCLE_2 * @arg @ref LL_I2C_DUTYCYCLE_16_9 * @retval Value between Min_Data=0x001 and Max_Data=0xFFF */ #define __LL_I2C_SPEED_FAST_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__DUTYCYCLE__) == LL_I2C_DUTYCYCLE_2)? \ (((((__PCLK__) / ((__SPEED__) * 3U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 3U))) : \ (((((__PCLK__) / ((__SPEED__) * 25U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 25U)))) /** * @brief Get the Least significant bits of a 10-Bits address. * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. * @retval Value between Min_Data=0x00 and Max_Data=0xFF */ #define __LL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) /** * @brief Convert a 10-Bits address to a 10-Bits header with Write direction. * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. * @retval Value between Min_Data=0xF0 and Max_Data=0xF6 */ #define __LL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) /** * @brief Convert a 10-Bits address to a 10-Bits header with Read direction. * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. * @retval Value between Min_Data=0xF1 and Max_Data=0xF7 */ #define __LL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup I2C_LL_Exported_Functions I2C Exported Functions * @{ */ /** @defgroup I2C_LL_EF_Configuration Configuration * @{ */ /** * @brief Enable I2C peripheral (PE = 1). * @rmtoll CR1 PE LL_I2C_Enable * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_PE); } /** * @brief Disable I2C peripheral (PE = 0). * @rmtoll CR1 PE LL_I2C_Disable * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); } /** * @brief Check if the I2C peripheral is enabled or disabled. * @rmtoll CR1 PE LL_I2C_IsEnabled * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)); } #if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) /** * @brief Configure Noise Filters (Analog and Digital). * @note If the analog filter is also enabled, the digital filter is added to analog filter. * The filters can only be programmed when the I2C is disabled (PE = 0). * @rmtoll FLTR ANOFF LL_I2C_ConfigFilters\n * FLTR DNF LL_I2C_ConfigFilters * @param I2Cx I2C Instance. * @param AnalogFilter This parameter can be one of the following values: * @arg @ref LL_I2C_ANALOGFILTER_ENABLE * @arg @ref LL_I2C_ANALOGFILTER_DISABLE * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. * @retval None */ __STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) { MODIFY_REG(I2Cx->FLTR, I2C_FLTR_ANOFF | I2C_FLTR_DNF, AnalogFilter | DigitalFilter); } #endif #if defined(I2C_FLTR_DNF) /** * @brief Configure Digital Noise Filter. * @note If the analog filter is also enabled, the digital filter is added to analog filter. * This filter can only be programmed when the I2C is disabled (PE = 0). * @rmtoll FLTR DNF LL_I2C_SetDigitalFilter * @param I2Cx I2C Instance. * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. * @retval None */ __STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) { MODIFY_REG(I2Cx->FLTR, I2C_FLTR_DNF, DigitalFilter); } /** * @brief Get the current Digital Noise Filter configuration. * @rmtoll FLTR DNF LL_I2C_GetDigitalFilter * @param I2Cx I2C Instance. * @retval Value between Min_Data=0x0 and Max_Data=0xF */ __STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->FLTR, I2C_FLTR_DNF)); } #endif #if defined(I2C_FLTR_ANOFF) /** * @brief Enable Analog Noise Filter. * @note This filter can only be programmed when the I2C is disabled (PE = 0). * @rmtoll FLTR ANOFF LL_I2C_EnableAnalogFilter * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); } /** * @brief Disable Analog Noise Filter. * @note This filter can only be programmed when the I2C is disabled (PE = 0). * @rmtoll FLTR ANOFF LL_I2C_DisableAnalogFilter * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); } /** * @brief Check if Analog Noise Filter is enabled or disabled. * @rmtoll FLTR ANOFF LL_I2C_IsEnabledAnalogFilter * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF) == (I2C_FLTR_ANOFF)); } #endif /** * @brief Enable DMA transmission requests. * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_TX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); } /** * @brief Disable DMA transmission requests. * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_TX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); } /** * @brief Check if DMA transmission requests are enabled or disabled. * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_TX * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); } /** * @brief Enable DMA reception requests. * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_RX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); } /** * @brief Disable DMA reception requests. * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_RX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); } /** * @brief Check if DMA reception requests are enabled or disabled. * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_RX * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); } /** * @brief Get the data register address used for DMA transfer. * @rmtoll DR DR LL_I2C_DMA_GetRegAddr * @param I2Cx I2C Instance. * @retval Address of data register */ __STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx) { return (uint32_t) & (I2Cx->DR); } /** * @brief Enable Clock stretching. * @note This bit can only be programmed when the I2C is disabled (PE = 0). * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); } /** * @brief Disable Clock stretching. * @note This bit can only be programmed when the I2C is disabled (PE = 0). * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); } /** * @brief Check if Clock stretching is enabled or disabled. * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)); } /** * @brief Enable General Call. * @note When enabled the Address 0x00 is ACKed. * @rmtoll CR1 ENGC LL_I2C_EnableGeneralCall * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_ENGC); } /** * @brief Disable General Call. * @note When disabled the Address 0x00 is NACKed. * @rmtoll CR1 ENGC LL_I2C_DisableGeneralCall * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENGC); } /** * @brief Check if General Call is enabled or disabled. * @rmtoll CR1 ENGC LL_I2C_IsEnabledGeneralCall * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_ENGC) == (I2C_CR1_ENGC)); } /** * @brief Set the Own Address1. * @rmtoll OAR1 ADD0 LL_I2C_SetOwnAddress1\n * OAR1 ADD1_7 LL_I2C_SetOwnAddress1\n * OAR1 ADD8_9 LL_I2C_SetOwnAddress1\n * OAR1 ADDMODE LL_I2C_SetOwnAddress1 * @param I2Cx I2C Instance. * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. * @param OwnAddrSize This parameter can be one of the following values: * @arg @ref LL_I2C_OWNADDRESS1_7BIT * @arg @ref LL_I2C_OWNADDRESS1_10BIT * @retval None */ __STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) { MODIFY_REG(I2Cx->OAR1, I2C_OAR1_ADD0 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD8_9 | I2C_OAR1_ADDMODE, OwnAddress1 | OwnAddrSize); } /** * @brief Set the 7bits Own Address2. * @note This action has no effect if own address2 is enabled. * @rmtoll OAR2 ADD2 LL_I2C_SetOwnAddress2 * @param I2Cx I2C Instance. * @param OwnAddress2 This parameter must be a value between Min_Data=0 and Max_Data=0x7F. * @retval None */ __STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2) { MODIFY_REG(I2Cx->OAR2, I2C_OAR2_ADD2, OwnAddress2); } /** * @brief Enable acknowledge on Own Address2 match address. * @rmtoll OAR2 ENDUAL LL_I2C_EnableOwnAddress2 * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); } /** * @brief Disable acknowledge on Own Address2 match address. * @rmtoll OAR2 ENDUAL LL_I2C_DisableOwnAddress2 * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); } /** * @brief Check if Own Address1 acknowledge is enabled or disabled. * @rmtoll OAR2 ENDUAL LL_I2C_IsEnabledOwnAddress2 * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL) == (I2C_OAR2_ENDUAL)); } /** * @brief Configure the Peripheral clock frequency. * @rmtoll CR2 FREQ LL_I2C_SetPeriphClock * @param I2Cx I2C Instance. * @param PeriphClock Peripheral Clock (in Hz) * @retval None */ __STATIC_INLINE void LL_I2C_SetPeriphClock(I2C_TypeDef *I2Cx, uint32_t PeriphClock) { MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock)); } /** * @brief Get the Peripheral clock frequency. * @rmtoll CR2 FREQ LL_I2C_GetPeriphClock * @param I2Cx I2C Instance. * @retval Value of Peripheral Clock (in Hz) */ __STATIC_INLINE uint32_t LL_I2C_GetPeriphClock(I2C_TypeDef *I2Cx) { return (uint32_t)(__LL_I2C_FREQ_MHZ_TO_HZ(READ_BIT(I2Cx->CR2, I2C_CR2_FREQ))); } /** * @brief Configure the Duty cycle (Fast mode only). * @rmtoll CCR DUTY LL_I2C_SetDutyCycle * @param I2Cx I2C Instance. * @param DutyCycle This parameter can be one of the following values: * @arg @ref LL_I2C_DUTYCYCLE_2 * @arg @ref LL_I2C_DUTYCYCLE_16_9 * @retval None */ __STATIC_INLINE void LL_I2C_SetDutyCycle(I2C_TypeDef *I2Cx, uint32_t DutyCycle) { MODIFY_REG(I2Cx->CCR, I2C_CCR_DUTY, DutyCycle); } /** * @brief Get the Duty cycle (Fast mode only). * @rmtoll CCR DUTY LL_I2C_GetDutyCycle * @param I2Cx I2C Instance. * @retval Returned value can be one of the following values: * @arg @ref LL_I2C_DUTYCYCLE_2 * @arg @ref LL_I2C_DUTYCYCLE_16_9 */ __STATIC_INLINE uint32_t LL_I2C_GetDutyCycle(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_DUTY)); } /** * @brief Configure the I2C master clock speed mode. * @rmtoll CCR FS LL_I2C_SetClockSpeedMode * @param I2Cx I2C Instance. * @param ClockSpeedMode This parameter can be one of the following values: * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE * @retval None */ __STATIC_INLINE void LL_I2C_SetClockSpeedMode(I2C_TypeDef *I2Cx, uint32_t ClockSpeedMode) { MODIFY_REG(I2Cx->CCR, I2C_CCR_FS, ClockSpeedMode); } /** * @brief Get the the I2C master speed mode. * @rmtoll CCR FS LL_I2C_GetClockSpeedMode * @param I2Cx I2C Instance. * @retval Returned value can be one of the following values: * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE */ __STATIC_INLINE uint32_t LL_I2C_GetClockSpeedMode(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_FS)); } /** * @brief Configure the SCL, SDA rising time. * @note This bit can only be programmed when the I2C is disabled (PE = 0). * @rmtoll TRISE TRISE LL_I2C_SetRiseTime * @param I2Cx I2C Instance. * @param RiseTime This parameter must be a value between Min_Data=0x02 and Max_Data=0x3F. * @retval None */ __STATIC_INLINE void LL_I2C_SetRiseTime(I2C_TypeDef *I2Cx, uint32_t RiseTime) { MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, RiseTime); } /** * @brief Get the SCL, SDA rising time. * @rmtoll TRISE TRISE LL_I2C_GetRiseTime * @param I2Cx I2C Instance. * @retval Value between Min_Data=0x02 and Max_Data=0x3F */ __STATIC_INLINE uint32_t LL_I2C_GetRiseTime(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->TRISE, I2C_TRISE_TRISE)); } /** * @brief Configure the SCL high and low period. * @note This bit can only be programmed when the I2C is disabled (PE = 0). * @rmtoll CCR CCR LL_I2C_SetClockPeriod * @param I2Cx I2C Instance. * @param ClockPeriod This parameter must be a value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. * @retval None */ __STATIC_INLINE void LL_I2C_SetClockPeriod(I2C_TypeDef *I2Cx, uint32_t ClockPeriod) { MODIFY_REG(I2Cx->CCR, I2C_CCR_CCR, ClockPeriod); } /** * @brief Get the SCL high and low period. * @rmtoll CCR CCR LL_I2C_GetClockPeriod * @param I2Cx I2C Instance. * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. */ __STATIC_INLINE uint32_t LL_I2C_GetClockPeriod(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_CCR)); } /** * @brief Configure the SCL speed. * @note This bit can only be programmed when the I2C is disabled (PE = 0). * @rmtoll CR2 FREQ LL_I2C_ConfigSpeed\n * TRISE TRISE LL_I2C_ConfigSpeed\n * CCR FS LL_I2C_ConfigSpeed\n * CCR DUTY LL_I2C_ConfigSpeed\n * CCR CCR LL_I2C_ConfigSpeed * @param I2Cx I2C Instance. * @param PeriphClock Peripheral Clock (in Hz) * @param ClockSpeed This parameter must be a value lower than 400kHz (in Hz). * @param DutyCycle This parameter can be one of the following values: * @arg @ref LL_I2C_DUTYCYCLE_2 * @arg @ref LL_I2C_DUTYCYCLE_16_9 * @retval None */ __STATIC_INLINE void LL_I2C_ConfigSpeed(I2C_TypeDef *I2Cx, uint32_t PeriphClock, uint32_t ClockSpeed, uint32_t DutyCycle) { register uint32_t freqrange = 0x0U; register uint32_t clockconfig = 0x0U; /* Compute frequency range */ freqrange = __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock); /* Configure I2Cx: Frequency range register */ MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, freqrange); /* Configure I2Cx: Rise Time register */ MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, __LL_I2C_RISE_TIME(freqrange, ClockSpeed)); /* Configure Speed mode, Duty Cycle and Clock control register value */ if (ClockSpeed > LL_I2C_MAX_SPEED_STANDARD) { /* Set Speed mode at fast and duty cycle for Clock Speed request in fast clock range */ clockconfig = LL_I2C_CLOCK_SPEED_FAST_MODE | \ __LL_I2C_SPEED_FAST_TO_CCR(PeriphClock, ClockSpeed, DutyCycle) | \ DutyCycle; } else { /* Set Speed mode at standard for Clock Speed request in standard clock range */ clockconfig = LL_I2C_CLOCK_SPEED_STANDARD_MODE | \ __LL_I2C_SPEED_STANDARD_TO_CCR(PeriphClock, ClockSpeed); } /* Configure I2Cx: Clock control register */ MODIFY_REG(I2Cx->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), clockconfig); } /** * @brief Configure peripheral mode. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 SMBUS LL_I2C_SetMode\n * CR1 SMBTYPE LL_I2C_SetMode\n * CR1 ENARP LL_I2C_SetMode * @param I2Cx I2C Instance. * @param PeripheralMode This parameter can be one of the following values: * @arg @ref LL_I2C_MODE_I2C * @arg @ref LL_I2C_MODE_SMBUS_HOST * @arg @ref LL_I2C_MODE_SMBUS_DEVICE * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP * @retval None */ __STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) { MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP, PeripheralMode); } /** * @brief Get peripheral mode. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 SMBUS LL_I2C_GetMode\n * CR1 SMBTYPE LL_I2C_GetMode\n * CR1 ENARP LL_I2C_GetMode * @param I2Cx I2C Instance. * @retval Returned value can be one of the following values: * @arg @ref LL_I2C_MODE_I2C * @arg @ref LL_I2C_MODE_SMBUS_HOST * @arg @ref LL_I2C_MODE_SMBUS_DEVICE * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP */ __STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP)); } /** * @brief Enable SMBus alert (Host or Device mode) * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note SMBus Device mode: * - SMBus Alert pin is drived low and * Alert Response Address Header acknowledge is enabled. * SMBus Host mode: * - SMBus Alert pin management is supported. * @rmtoll CR1 ALERT LL_I2C_EnableSMBusAlert * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_ALERT); } /** * @brief Disable SMBus alert (Host or Device mode) * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note SMBus Device mode: * - SMBus Alert pin is not drived (can be used as a standard GPIO) and * Alert Response Address Header acknowledge is disabled. * SMBus Host mode: * - SMBus Alert pin management is not supported. * @rmtoll CR1 ALERT LL_I2C_DisableSMBusAlert * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERT); } /** * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 ALERT LL_I2C_IsEnabledSMBusAlert * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_ALERT) == (I2C_CR1_ALERT)); } /** * @brief Enable SMBus Packet Error Calculation (PEC). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 ENPEC LL_I2C_EnableSMBusPEC * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_ENPEC); } /** * @brief Disable SMBus Packet Error Calculation (PEC). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 ENPEC LL_I2C_DisableSMBusPEC * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENPEC); } /** * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 ENPEC LL_I2C_IsEnabledSMBusPEC * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_ENPEC) == (I2C_CR1_ENPEC)); } /** * @} */ /** @defgroup I2C_LL_EF_IT_Management IT_Management * @{ */ /** * @brief Enable TXE interrupt. * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_TX\n * CR2 ITBUFEN LL_I2C_EnableIT_TX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); } /** * @brief Disable TXE interrupt. * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_TX\n * CR2 ITBUFEN LL_I2C_DisableIT_TX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); } /** * @brief Check if the TXE Interrupt is enabled or disabled. * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_TX\n * CR2 ITBUFEN LL_I2C_IsEnabledIT_TX * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); } /** * @brief Enable RXNE interrupt. * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_RX\n * CR2 ITBUFEN LL_I2C_EnableIT_RX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); } /** * @brief Disable RXNE interrupt. * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_RX\n * CR2 ITBUFEN LL_I2C_DisableIT_RX * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); } /** * @brief Check if the RXNE Interrupt is enabled or disabled. * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_RX\n * CR2 ITBUFEN LL_I2C_IsEnabledIT_RX * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); } /** * @brief Enable Events interrupts. * @note Any of these events will generate interrupt : * Start Bit (SB) * Address sent, Address matched (ADDR) * 10-bit header sent (ADD10) * Stop detection (STOPF) * Byte transfer finished (BTF) * * @note Any of these events will generate interrupt if Buffer interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_BUF()) : * Receive buffer not empty (RXNE) * Transmit buffer empty (TXE) * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_EVT * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableIT_EVT(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); } /** * @brief Disable Events interrupts. * @note Any of these events will generate interrupt : * Start Bit (SB) * Address sent, Address matched (ADDR) * 10-bit header sent (ADD10) * Stop detection (STOPF) * Byte transfer finished (BTF) * Receive buffer not empty (RXNE) * Transmit buffer empty (TXE) * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_EVT * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableIT_EVT(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); } /** * @brief Check if Events interrupts are enabled or disabled. * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_EVT * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_EVT(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN) == (I2C_CR2_ITEVTEN)); } /** * @brief Enable Buffer interrupts. * @note Any of these Buffer events will generate interrupt if Events interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_EVT()) : * Receive buffer not empty (RXNE) * Transmit buffer empty (TXE) * @rmtoll CR2 ITBUFEN LL_I2C_EnableIT_BUF * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableIT_BUF(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); } /** * @brief Disable Buffer interrupts. * @note Any of these Buffer events will generate interrupt : * Receive buffer not empty (RXNE) * Transmit buffer empty (TXE) * @rmtoll CR2 ITBUFEN LL_I2C_DisableIT_BUF * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableIT_BUF(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); } /** * @brief Check if Buffer interrupts are enabled or disabled. * @rmtoll CR2 ITBUFEN LL_I2C_IsEnabledIT_BUF * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_BUF(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN) == (I2C_CR2_ITBUFEN)); } /** * @brief Enable Error interrupts. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note Any of these errors will generate interrupt : * Bus Error detection (BERR) * Arbitration Loss (ARLO) * Acknowledge Failure(AF) * Overrun/Underrun (OVR) * SMBus Timeout detection (TIMEOUT) * SMBus PEC error detection (PECERR) * SMBus Alert pin event detection (SMBALERT) * @rmtoll CR2 ITERREN LL_I2C_EnableIT_ERR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_ITERREN); } /** * @brief Disable Error interrupts. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note Any of these errors will generate interrupt : * Bus Error detection (BERR) * Arbitration Loss (ARLO) * Acknowledge Failure(AF) * Overrun/Underrun (OVR) * SMBus Timeout detection (TIMEOUT) * SMBus PEC error detection (PECERR) * SMBus Alert pin event detection (SMBALERT) * @rmtoll CR2 ITERREN LL_I2C_DisableIT_ERR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITERREN); } /** * @brief Check if Error interrupts are enabled or disabled. * @rmtoll CR2 ITERREN LL_I2C_IsEnabledIT_ERR * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_ITERREN) == (I2C_CR2_ITERREN)); } /** * @} */ /** @defgroup I2C_LL_EF_FLAG_management FLAG_management * @{ */ /** * @brief Indicate the status of Transmit data register empty flag. * @note RESET: When next data is written in Transmit data register. * SET: When Transmit data register is empty. * @rmtoll SR1 TXE LL_I2C_IsActiveFlag_TXE * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_TXE) == (I2C_SR1_TXE)); } /** * @brief Indicate the status of Byte Transfer Finished flag. * RESET: When Data byte transfer not done. * SET: When Data byte transfer succeeded. * @rmtoll SR1 BTF LL_I2C_IsActiveFlag_BTF * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BTF(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_BTF) == (I2C_SR1_BTF)); } /** * @brief Indicate the status of Receive data register not empty flag. * @note RESET: When Receive data register is read. * SET: When the received data is copied in Receive data register. * @rmtoll SR1 RXNE LL_I2C_IsActiveFlag_RXNE * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_RXNE) == (I2C_SR1_RXNE)); } /** * @brief Indicate the status of Start Bit (master mode). * @note RESET: When No Start condition. * SET: When Start condition is generated. * @rmtoll SR1 SB LL_I2C_IsActiveFlag_SB * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_SB(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_SB) == (I2C_SR1_SB)); } /** * @brief Indicate the status of Address sent (master mode) or Address matched flag (slave mode). * @note RESET: Clear default value. * SET: When the address is fully sent (master mode) or when the received slave address matched with one of the enabled slave address (slave mode). * @rmtoll SR1 ADDR LL_I2C_IsActiveFlag_ADDR * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_ADDR) == (I2C_SR1_ADDR)); } /** * @brief Indicate the status of 10-bit header sent (master mode). * @note RESET: When no ADD10 event occured. * SET: When the master has sent the first address byte (header). * @rmtoll SR1 ADD10 LL_I2C_IsActiveFlag_ADD10 * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADD10(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_ADD10) == (I2C_SR1_ADD10)); } /** * @brief Indicate the status of Acknowledge failure flag. * @note RESET: No acknowledge failure. * SET: When an acknowledge failure is received after a byte transmission. * @rmtoll SR1 AF LL_I2C_IsActiveFlag_AF * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_AF(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_AF) == (I2C_SR1_AF)); } /** * @brief Indicate the status of Stop detection flag (slave mode). * @note RESET: Clear default value. * SET: When a Stop condition is detected. * @rmtoll SR1 STOPF LL_I2C_IsActiveFlag_STOP * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_STOPF) == (I2C_SR1_STOPF)); } /** * @brief Indicate the status of Bus error flag. * @note RESET: Clear default value. * SET: When a misplaced Start or Stop condition is detected. * @rmtoll SR1 BERR LL_I2C_IsActiveFlag_BERR * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_BERR) == (I2C_SR1_BERR)); } /** * @brief Indicate the status of Arbitration lost flag. * @note RESET: Clear default value. * SET: When arbitration lost. * @rmtoll SR1 ARLO LL_I2C_IsActiveFlag_ARLO * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_ARLO) == (I2C_SR1_ARLO)); } /** * @brief Indicate the status of Overrun/Underrun flag. * @note RESET: Clear default value. * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). * @rmtoll SR1 OVR LL_I2C_IsActiveFlag_OVR * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_OVR) == (I2C_SR1_OVR)); } /** * @brief Indicate the status of SMBus PEC error flag in reception. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR1 PECERR LL_I2C_IsActiveSMBusFlag_PECERR * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_PECERR) == (I2C_SR1_PECERR)); } /** * @brief Indicate the status of SMBus Timeout detection flag. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR1 TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT) == (I2C_SR1_TIMEOUT)); } /** * @brief Indicate the status of SMBus alert flag. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR1 SMBALERT LL_I2C_IsActiveSMBusFlag_ALERT * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR1, I2C_SR1_SMBALERT) == (I2C_SR1_SMBALERT)); } /** * @brief Indicate the status of Bus Busy flag. * @note RESET: Clear default value. * SET: When a Start condition is detected. * @rmtoll SR2 BUSY LL_I2C_IsActiveFlag_BUSY * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_BUSY) == (I2C_SR2_BUSY)); } /** * @brief Indicate the status of Dual flag. * @note RESET: Received address matched with OAR1. * SET: Received address matched with OAR2. * @rmtoll SR2 DUALF LL_I2C_IsActiveFlag_DUAL * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_DUAL(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_DUALF) == (I2C_SR2_DUALF)); } /** * @brief Indicate the status of SMBus Host address reception (Slave mode). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note RESET: No SMBus Host address * SET: SMBus Host address received. * @note This status is cleared by hardware after a STOP condition or repeated START condition. * @rmtoll SR2 SMBHOST LL_I2C_IsActiveSMBusFlag_SMBHOST * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBHOST(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBHOST) == (I2C_SR2_SMBHOST)); } /** * @brief Indicate the status of SMBus Device default address reception (Slave mode). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note RESET: No SMBus Device default address * SET: SMBus Device default address received. * @note This status is cleared by hardware after a STOP condition or repeated START condition. * @rmtoll SR2 SMBDEFAULT LL_I2C_IsActiveSMBusFlag_SMBDEFAULT * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBDEFAULT(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBDEFAULT) == (I2C_SR2_SMBDEFAULT)); } /** * @brief Indicate the status of General call address reception (Slave mode). * @note RESET: No Generall call address * SET: General call address received. * @note This status is cleared by hardware after a STOP condition or repeated START condition. * @rmtoll SR2 GENCALL LL_I2C_IsActiveFlag_GENCALL * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_GENCALL(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_GENCALL) == (I2C_SR2_GENCALL)); } /** * @brief Indicate the status of Master/Slave flag. * @note RESET: Slave Mode. * SET: Master Mode. * @rmtoll SR2 MSL LL_I2C_IsActiveFlag_MSL * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_MSL(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->SR2, I2C_SR2_MSL) == (I2C_SR2_MSL)); } /** * @brief Clear Address Matched flag. * @note Clearing this flag is done by a read access to the I2Cx_SR1 * register followed by a read access to the I2Cx_SR2 register. * @rmtoll SR1 ADDR LL_I2C_ClearFlag_ADDR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) { __IO uint32_t tmpreg; tmpreg = I2Cx->SR1; (void) tmpreg; tmpreg = I2Cx->SR2; (void) tmpreg; } /** * @brief Clear Acknowledge failure flag. * @rmtoll SR1 AF LL_I2C_ClearFlag_AF * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_AF(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_AF); } /** * @brief Clear Stop detection flag. * @note Clearing this flag is done by a read access to the I2Cx_SR1 * register followed by a write access to I2Cx_CR1 register. * @rmtoll SR1 STOPF LL_I2C_ClearFlag_STOP\n * CR1 PE LL_I2C_ClearFlag_STOP * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) { __IO uint32_t tmpreg; tmpreg = I2Cx->SR1; (void) tmpreg; SET_BIT(I2Cx->CR1, I2C_CR1_PE); } /** * @brief Clear Bus error flag. * @rmtoll SR1 BERR LL_I2C_ClearFlag_BERR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_BERR); } /** * @brief Clear Arbitration lost flag. * @rmtoll SR1 ARLO LL_I2C_ClearFlag_ARLO * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_ARLO); } /** * @brief Clear Overrun/Underrun flag. * @rmtoll SR1 OVR LL_I2C_ClearFlag_OVR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_OVR); } /** * @brief Clear SMBus PEC error flag. * @rmtoll SR1 PECERR LL_I2C_ClearSMBusFlag_PECERR * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_PECERR); } /** * @brief Clear SMBus Timeout detection flag. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR1 TIMEOUT LL_I2C_ClearSMBusFlag_TIMEOUT * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT); } /** * @brief Clear SMBus Alert flag. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR1 SMBALERT LL_I2C_ClearSMBusFlag_ALERT * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->SR1, I2C_SR1_SMBALERT); } /** * @} */ /** @defgroup I2C_LL_EF_Data_Management Data_Management * @{ */ /** * @brief Enable Reset of I2C peripheral. * @rmtoll CR1 SWRST LL_I2C_EnableReset * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableReset(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_SWRST); } /** * @brief Disable Reset of I2C peripheral. * @rmtoll CR1 SWRST LL_I2C_DisableReset * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableReset(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_SWRST); } /** * @brief Check if the I2C peripheral is under reset state or not. * @rmtoll CR1 SWRST LL_I2C_IsResetEnabled * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsResetEnabled(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_SWRST) == (I2C_CR1_SWRST)); } /** * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. * @note Usage in Slave or Master mode. * @rmtoll CR1 ACK LL_I2C_AcknowledgeNextData * @param I2Cx I2C Instance. * @param TypeAcknowledge This parameter can be one of the following values: * @arg @ref LL_I2C_ACK * @arg @ref LL_I2C_NACK * @retval None */ __STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) { MODIFY_REG(I2Cx->CR1, I2C_CR1_ACK, TypeAcknowledge); } /** * @brief Generate a START or RESTART condition * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. * This action has no effect when RELOAD is set. * @rmtoll CR1 START LL_I2C_GenerateStartCondition * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_START); } /** * @brief Generate a STOP condition after the current byte transfer (master mode). * @rmtoll CR1 STOP LL_I2C_GenerateStopCondition * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_STOP); } /** * @brief Enable bit POS (master/host mode). * @note In that case, the ACK bit controls the (N)ACK of the next byte received or the PEC bit indicates that the next byte in shift register is a PEC. * @rmtoll CR1 POS LL_I2C_EnableBitPOS * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableBitPOS(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_POS); } /** * @brief Disable bit POS (master/host mode). * @note In that case, the ACK bit controls the (N)ACK of the current byte received or the PEC bit indicates that the current byte in shift register is a PEC. * @rmtoll CR1 POS LL_I2C_DisableBitPOS * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableBitPOS(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_POS); } /** * @brief Check if bit POS is enabled or disabled. * @rmtoll CR1 POS LL_I2C_IsEnabledBitPOS * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledBitPOS(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_POS) == (I2C_CR1_POS)); } /** * @brief Indicate the value of transfer direction. * @note RESET: Bus is in read transfer (peripheral point of view). * SET: Bus is in write transfer (peripheral point of view). * @rmtoll SR2 TRA LL_I2C_GetTransferDirection * @param I2Cx I2C Instance. * @retval Returned value can be one of the following values: * @arg @ref LL_I2C_DIRECTION_WRITE * @arg @ref LL_I2C_DIRECTION_READ */ __STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_TRA)); } /** * @brief Enable DMA last transfer. * @note This action mean that next DMA EOT is the last transfer. * @rmtoll CR2 LAST LL_I2C_EnableLastDMA * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableLastDMA(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR2, I2C_CR2_LAST); } /** * @brief Disable DMA last transfer. * @note This action mean that next DMA EOT is not the last transfer. * @rmtoll CR2 LAST LL_I2C_DisableLastDMA * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableLastDMA(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR2, I2C_CR2_LAST); } /** * @brief Check if DMA last transfer is enabled or disabled. * @rmtoll CR2 LAST LL_I2C_IsEnabledLastDMA * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledLastDMA(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR2, I2C_CR2_LAST) == (I2C_CR2_LAST)); } /** * @brief Enable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @note This feature is cleared by hardware when the PEC byte is transferred or compared, * or by a START or STOP condition, it is also cleared by software. * @rmtoll CR1 PEC LL_I2C_EnableSMBusPECCompare * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) { SET_BIT(I2Cx->CR1, I2C_CR1_PEC); } /** * @brief Disable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 PEC LL_I2C_DisableSMBusPECCompare * @param I2Cx I2C Instance. * @retval None */ __STATIC_INLINE void LL_I2C_DisableSMBusPECCompare(I2C_TypeDef *I2Cx) { CLEAR_BIT(I2Cx->CR1, I2C_CR1_PEC); } /** * @brief Check if the SMBus Packet Error byte transfer or internal comparison is requested or not. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll CR1 PEC LL_I2C_IsEnabledSMBusPECCompare * @param I2Cx I2C Instance. * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) { return (READ_BIT(I2Cx->CR1, I2C_CR1_PEC) == (I2C_CR1_PEC)); } /** * @brief Get the SMBus Packet Error byte calculated. * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll SR2 PEC LL_I2C_GetSMBusPEC * @param I2Cx I2C Instance. * @retval Value between Min_Data=0x00 and Max_Data=0xFF */ __STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) { return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_PEC) >> I2C_SR2_PEC_Pos); } /** * @brief Read Receive Data register. * @rmtoll DR DR LL_I2C_ReceiveData8 * @param I2Cx I2C Instance. * @retval Value between Min_Data=0x0 and Max_Data=0xFF */ __STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) { return (uint8_t)(READ_BIT(I2Cx->DR, I2C_DR_DR)); } /** * @brief Write in Transmit Data Register . * @rmtoll DR DR LL_I2C_TransmitData8 * @param I2Cx I2C Instance. * @param Data Value between Min_Data=0x0 and Max_Data=0xFF * @retval None */ __STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) { MODIFY_REG(I2Cx->DR, I2C_DR_DR, Data); } /** * @} */ #if defined(USE_FULL_LL_DRIVER) /** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions * @{ */ uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx); void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /** * @} */ /** * @} */ #endif /* I2C1 || I2C2 || I2C3 */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_LL_I2C_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/