Mercurial > public > ostc4
view Documentations/dump-disc.cfg @ 714:045ff7800501
Added customizable data area for specific sensor data:
In future smart sensors will be connected via UART interface. These sensor provide additional data like diagnostics or id numbers which may vary from sensor to sensor. That's why a byte array has been added which stores up to 32 bytes. The layout of this array may be specific to sensor needs. As first example temperature and id number of the DiveO2 sensor are provided.
author | Ideenmodellierer |
---|---|
date | Sun, 20 Nov 2022 20:42:08 +0100 |
parents | 01cc5959f199 |
children |
line wrap: on
line source
#! openocd -f # Define the prob used: source [find interface/stlink-v2.cfg] set WORKAREASIZE 0x8000 transport select hla_swd # Reset options set ENABLE_LOW_POWER 1 set STOP_WATCHDOG 1 reset_config srst_only srst_nogate connect_assert_srst # Seelct the right chip set CHIPNAME stm32f427IIT6 set CONNECT_UNDER_RESET 1 source [find target/stm32f4x.cfg] # Allow to continue execution after a connection: init_reset run puts "Flash banks:" flash banks #puts "Reading FIRMWARE..." # Requires OpenOCD 0.10.0 / released January 2017 ? #flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000 #puts "Done." exit