view Documentations/dump-disc.cfg @ 574:01ee21dd311f

Improved focus detection: In previous version th calibration window was turned into the current one. At all two translations were used causing a jitter. Now the current view is translated into the calibration windows by one step increasing the quality of the prediction. Reworked detection of pitch/sector/scroll events: Sector and scroll uses pitch angles to calculate the view to show. Movment detection uses movment, which may also be out of focus for a short time. To improve all detections these two use cases are now handled individual. Sector and scroll have increased action angle in case yaw and roll stay stable.
author Ideenmodellierer
date Wed, 25 Nov 2020 20:26:01 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit