Mercurial > public > ostc4
view wiki/Using OpenSTM32.md @ 781:01b3eb9d55c3
Update real multiplexer implementation:
The final multiplexer provides 4 sensor connections instead of three supported by the prototype => A mupping functionality has been introduced to map the 4 possible mux addresses to the three visible O2 sensor slots.
In addition the request cycle time is not depending on the number of sensors connected to make sure that all sensors are read within a defined time frame.
The error reaction had to be updated to reset mux channels if one of the sensors fails to respond.
| author | Ideenmodellierer |
|---|---|
| date | Mon, 29 May 2023 18:26:55 +0200 |
| parents | 0e7c16dd774d |
| children |
line wrap: on
line source
# Using OpenSTM32 IDE to Compile OSTC4 Firmware # The free and Open [STM32 IDE](http://www.openstm32.org/System%2BWorkbench%2Bfor%2BSTM32) is an integrated development environment based on _Eclipse_ that will allows you to compile and link code for the OSTC4 dive computer. You will then be able to generate `.bin` firmware files to upload to your computer using your favourite tools, eg. [OSTC Companion](https://ostc-planner.net/companion). 1. Register on http://www.openstm32.org/ : that will allows you to download the IDE. 2. Once registered and logged in, you can go to _Documentation_ and _Installation Manual_. Follow the instructions to install the IDE (available for Windows 7, MacOS and Linux). 3. Use the ready made project ... in ... Or you can create a brand new project by following the _How To_'s: - [HowTo compile CPU1-Discovery main firmware](Detailed CPU1-Discovery Project.md) - [HowTo compile CPU1-Discovery protected area firmware](Detailed CPU1-Upper Project.md) - [HowTo compile CPU2-RTE real-time firmware](Detailed CPU2-RTE Project.md) - [HowTo generate uploadable firmware file](Make Firmware File.md)