Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 781:01b3eb9d55c3

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Update real multiplexer implementation: The final multiplexer provides 4 sensor connections instead of three supported by the prototype => A mupping functionality has been introduced to map the 4 possible mux addresses to the three visible O2 sensor slots. In addition the request cycle time is not depending on the number of sensors connected to make sure that all sensors are read within a defined time frame. The error reaction had to be updated to reset mux channels if one of the sensors fails to respond.
author Ideenmodellierer
date Mon, 29 May 2023 18:26:55 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit