--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c	Thu Mar 07 15:06:43 2019 +0100
@@ -0,0 +1,523 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rng.c
+  * @author  MCD Application Team
+  * @brief   RNG HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Random Number Generator (RNG) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      The RNG HAL driver can be used as follows:
+
+      (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro 
+          in HAL_RNG_MspInit().
+      (#) Activate the RNG peripheral using HAL_RNG_Init() function.
+      (#) Wait until the 32 bit Random Number Generator contains a valid 
+          random data using (polling/interrupt) mode.   
+      (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RNG 
+  * @{
+  */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F469xx) ||\
+    defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
+    defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Constants
+  * @{
+  */
+#define RNG_TIMEOUT_VALUE     2U
+/**
+  * @}
+  */ 
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RNG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the RNG according to the specified parameters 
+          in the RNG_InitTypeDef and create the associated handle
+      (+) DeInitialize the RNG peripheral
+      (+) Initialize the RNG MSP
+      (+) DeInitialize RNG MSP 
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the RNG peripheral and creates the associated handle.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
+{ 
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  if(hrng->State == HAL_RNG_STATE_RESET)
+  {  
+    /* Allocate lock resource and initialize it */
+    hrng->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_RNG_MspInit(hrng);
+  }
+  
+  /* Change RNG peripheral state */
+  hrng->State = HAL_RNG_STATE_BUSY;
+
+  /* Enable the RNG Peripheral */
+  __HAL_RNG_ENABLE(hrng);
+
+  /* Initialize the RNG state */
+  hrng->State = HAL_RNG_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the RNG peripheral. 
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
+{ 
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+  /* Disable the RNG Peripheral */
+  CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
+  
+  /* Clear RNG interrupt status flags */
+  CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
+  
+  /* DeInit the low level hardware */
+  HAL_RNG_MspDeInit(hrng);
+  
+  /* Update the RNG state */
+  hrng->State = HAL_RNG_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrng);
+  
+  /* Return the function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RNG MSP.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  DeInitializes the RNG MSP.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspDeInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group2
+ *  @brief   Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Get the 32 bit Random number
+      (+) Get the 32 bit Random number with interrupt enabled
+      (+) Handle RNG interrupt request 
+
+@endverbatim
+  * @{
+  */
+   
+/**
+  * @brief  Generates a 32-bit random number.
+  * @note   Each time the random number data is read the RNG_FLAG_DRDY flag 
+  *         is automatically cleared.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit pointer to generated random number variable if successful.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
+{
+  uint32_t tickstart = 0U;    
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(hrng); 
+  
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */  
+    hrng->State = HAL_RNG_STATE_BUSY;  
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+  
+    /* Check if data register contains valid random data */
+    while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+      {    
+        hrng->State = HAL_RNG_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrng);
+      
+        return HAL_TIMEOUT;
+      } 
+    }
+  
+    /* Get a 32bit Random number */
+    hrng->RandomNumber = hrng->Instance->DR;
+    *random32bit = hrng->RandomNumber;
+  
+    hrng->State = HAL_RNG_STATE_READY;
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrng);
+  
+  return status;
+}
+
+/**
+  * @brief  Generates a 32-bit random number in interrupt mode.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(hrng);
+  
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */  
+    hrng->State = HAL_RNG_STATE_BUSY;  
+  
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+    
+    /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ 
+    __HAL_RNG_ENABLE_IT(hrng);
+  }
+  else
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+    
+    status = HAL_ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Handles RNG interrupt request.
+  * @note   In the case of a clock error, the RNG is no more able to generate 
+  *         random numbers because the PLL48CLK clock is not correct. User has 
+  *         to check that the clock controller is correctly configured to provide
+  *         the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). 
+  *         The clock error has no impact on the previously generated 
+  *         random numbers, and the RNG_DR register contents can be used.
+  * @note   In the case of a seed error, the generation of random numbers is 
+  *         interrupted as long as the SECS bit is '1'. If a number is 
+  *         available in the RNG_DR register, it must not be used because it may 
+  *         not have enough entropy. In this case, it is recommended to clear the 
+  *         SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable 
+  *         the RNG peripheral to reinitialize and restart the RNG.
+  * @note   User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
+  *         or CEIS are set.  
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+
+  */
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
+{
+  /* RNG clock error interrupt occurred */
+  if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) ||  (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
+  { 
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_ERROR;
+  
+    HAL_RNG_ErrorCallback(hrng);
+    
+    /* Clear the clock error flag */
+    __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
+    
+  }
+  
+  /* Check RNG data ready interrupt occurred */    
+  if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+  {
+    /* Generate random number once, so disable the IT */
+    __HAL_RNG_DISABLE_IT(hrng);
+    
+    /* Get the 32bit Random number (DRDY flag automatically cleared) */ 
+    hrng->RandomNumber = hrng->Instance->DR;
+    
+    if(hrng->State != HAL_RNG_STATE_ERROR)
+    {
+      /* Change RNG peripheral state */
+      hrng->State = HAL_RNG_STATE_READY; 
+      
+      /* Data Ready callback */ 
+      HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
+    } 
+  }
+} 
+
+/**
+  * @brief  Returns generated random number in polling mode (Obsolete)
+  *         Use HAL_RNG_GenerateRandomNumber() API instead.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval Random value
+  */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+  {
+    return hrng->RandomNumber; 
+  }
+  else
+  {
+    return 0U;
+  }
+}
+
+/**
+  * @brief  Returns a 32-bit random number with interrupt enabled (Obsolete),
+  *         Use HAL_RNG_GenerateRandomNumber_IT() API instead.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval 32-bit random number
+  */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  uint32_t random32bit = 0U;
+  
+  /* Process locked */
+  __HAL_LOCK(hrng);
+  
+  /* Change RNG peripheral state */  
+  hrng->State = HAL_RNG_STATE_BUSY;  
+  
+  /* Get a 32bit Random number */ 
+  random32bit = hrng->Instance->DR;
+  
+  /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ 
+  __HAL_RNG_ENABLE_IT(hrng); 
+  
+  /* Return the 32 bit random number */   
+  return random32bit;
+}
+
+/**
+  * @brief  Read latest generated random number. 
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval random value
+  */
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  return(hrng->RandomNumber);
+}
+
+/**
+  * @brief  Data Ready callback in non-blocking mode. 
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit generated random number.
+  * @retval None
+  */
+__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  UNUSED(random32bit);
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ReadyDataCallback must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  RNG error callbacks.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ErrorCallback must be implemented in the user file.
+   */
+}
+/**
+  * @}
+  */ 
+
+  
+/** @addtogroup RNG_Exported_Functions_Group3
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Returns the RNG state.
+  * @param  hrng pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL state
+  */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+{
+  return hrng->State;
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F410xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
+          STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
+
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/