--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c	Thu Mar 07 15:06:43 2019 +0100
@@ -0,0 +1,1050 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_nor.c
+  * @author  MCD Application Team
+  * @brief   NOR HAL module driver.
+  *          This file provides a generic firmware to drive NOR memories mounted 
+  *          as external device.
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================       
+    [..]
+      This driver is a generic layered driver which contains a set of APIs used to 
+      control NOR flash memories. It uses the FMC/FSMC layer functions to interface 
+      with NOR devices. This driver is used as follows:
+    
+      (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() 
+          with control and timing parameters for both normal and extended mode.
+            
+      (+) Read NOR flash memory manufacturer code and device IDs using the function
+          HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef 
+          structure declared by the function caller. 
+        
+      (+) Access NOR flash memory by read/write data unit operations using the functions
+          HAL_NOR_Read(), HAL_NOR_Program().
+        
+      (+) Perform NOR flash erase block/chip operations using the functions 
+          HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+        
+      (+) Read the NOR flash CFI (common flash interface) IDs using the function
+          HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+          structure declared by the function caller.
+        
+      (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+          HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation  
+       
+      (+) You can monitor the NOR device HAL state by calling the function
+          HAL_NOR_GetState() 
+    [..]
+     (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+         If a NOR flash device contains different operations and/or implementations, 
+         it should be implemented separately.
+
+     *** NOR HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in NOR HAL driver.
+       
+      (+) NOR_WRITE : NOR memory write data to specified address
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup NOR NOR
+  * @brief NOR driver modules
+  * @{
+  */
+#ifdef HAL_NOR_MODULE_ENABLED
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
+    defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F413xx) || defined(STM32F423xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+      
+/** @defgroup NOR_Private_Defines NOR Private Defines
+  * @{
+  */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIRST_CFI             (uint16_t)0x0055
+#define NOR_CMD_ADDRESS_SECOND                (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_THIRD                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FOURTH                (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIFTH                 (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_SIXTH                 (uint16_t)0x0555
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET               (uint16_t)0x00F0
+#define NOR_CMD_DATA_FIRST                    (uint16_t)0x00AA
+#define NOR_CMD_DATA_SECOND                   (uint16_t)0x0055
+#define NOR_CMD_DATA_AUTO_SELECT              (uint16_t)0x0090
+#define NOR_CMD_DATA_PROGRAM                  (uint16_t)0x00A0
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD   (uint16_t)0x0080
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH  (uint16_t)0x00AA
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH   (uint16_t)0x0055
+#define NOR_CMD_DATA_CHIP_ERASE               (uint16_t)0x0010
+#define NOR_CMD_DATA_CFI                      (uint16_t)0x0098
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG          (uint8_t)0x25
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM  (uint8_t)0x29
+#define NOR_CMD_DATA_BLOCK_ERASE              (uint8_t)0x30
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ5                   (uint16_t)0x0020
+#define NOR_MASK_STATUS_DQ6                   (uint16_t)0x0040
+
+/**
+  * @}
+  */
+      
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Variables NOR Private Variables
+  * @{
+  */
+
+static uint32_t uwNORMemoryDataWidth  = NOR_MEMORY_8B;
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+  * @{
+  */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ==============================================================================
+           ##### NOR Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to initialize/de-initialize
+    the NOR memory
+  
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Perform the NOR memory Initialization sequence
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Timing pointer to NOR control timing structure 
+  * @param  ExtTiming pointer to NOR extended mode timing structure    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+  /* Check the NOR handle parameter */
+  if(hnor == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  if(hnor->State == HAL_NOR_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hnor->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_NOR_MspInit(hnor);
+  }
+  
+  /* Initialize NOR control Interface */
+  FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+  /* Initialize NOR timing Interface */
+  FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); 
+
+  /* Initialize NOR extended mode timing Interface */
+  FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+  /* Enable the NORSRAM device */
+  __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+  /* Initialize NOR Memory Data Width*/
+  if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8)
+  {
+    uwNORMemoryDataWidth = NOR_MEMORY_8B;
+  }
+  else
+  {
+    uwNORMemoryDataWidth = NOR_MEMORY_16B;
+  }
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY; 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform NOR memory De-Initialization sequence
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)  
+{
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_NOR_MspDeInit(hnor);
+ 
+  /* Configure the NOR registers with their reset values */
+  FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NOR MSP Init
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  NOR MSP DeInit
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  NOR MSP Wait for Ready/Busy signal
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Timeout Maximum timeout value
+  * @retval None
+  */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  UNUSED(Timeout);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspWait could be implemented in the user file
+   */ 
+}
+  
+/**
+  * @}
+  */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions 
+  * @brief    Input Output and memory control functions 
+  *
+  @verbatim    
+  ==============================================================================
+                ##### NOR Input and Output functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to use and control the NOR memory
+  
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Read NOR flash IDs
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pNOR_ID  pointer to NOR ID structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read ID command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+
+  /* Read the NOR IDs */
+  pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
+  pNOR_ID->Device_Code1      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
+  pNOR_ID->Device_Code2      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
+  pNOR_ID->Device_Code3      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);   
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the NOR memory to Read mode.
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+  uint32_t deviceaddress = 0U;  
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+  
+  NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);   
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read data from NOR memory 
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pAddress pointer to Device address
+  * @param  pData  pointer to read data  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  } 
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+
+  /* Read the data */
+  *pData = *(__IO uint32_t *)(uint32_t)pAddress;
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Program data to NOR memory 
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pAddress Device address
+  * @param  pData  pointer to the data to write   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  } 
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send program data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+
+  /* Write the data */
+  NOR_WRITE(pAddress, *pData);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Reads a half-word buffer from the NOR memory.
+  * @param  hnor pointer to the NOR handle
+  * @param  uwAddress NOR memory internal address to read from.
+  * @param  pData pointer to the buffer that receives the data read from the 
+  *         NOR memory.
+  * @param  uwBufferSize  number of Half word to read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+  
+  /* Read buffer */
+  while( uwBufferSize > 0U) 
+  {
+    *pData++ = *(__IO uint16_t *)uwAddress;
+    uwAddress += 2U;
+    uwBufferSize--;
+  } 
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Writes a half-word buffer to the NOR memory. This function must be used 
+            only with S29GL128P NOR memory. 
+  * @param  hnor pointer to the NOR handle
+  * @param  uwAddress NOR memory internal start write address 
+  * @param  pData pointer to source data buffer. 
+  * @param  uwBufferSize Size of the buffer to write
+  * @retval HAL status
+  */ 
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint16_t * p_currentaddress = (uint16_t *)NULL;
+  uint16_t * p_endaddress = (uint16_t *)NULL;
+  uint32_t lastloadedaddress = 0U, deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Initialize variables */
+  p_currentaddress  = (uint16_t*)((uint32_t)(uwAddress));
+  p_endaddress      = p_currentaddress + (uwBufferSize-1U);
+  lastloadedaddress = (uint32_t)(uwAddress);
+
+  /* Issue unlock command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); 
+
+  /* Write Buffer Load Command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, uwAddress), (uwBufferSize - 1U)); 
+
+  /* Load Data into NOR Buffer */
+  while(p_currentaddress <= p_endaddress)
+  {
+    /* Store last loaded address & data value (for polling) */
+     lastloadedaddress = (uint32_t)p_currentaddress;
+ 
+    NOR_WRITE(p_currentaddress, *pData++);
+    
+    p_currentaddress ++; 
+  }
+
+  NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK; 
+  
+}
+
+/**
+  * @brief  Erase the specified block of the NOR memory 
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  BlockAddress  Block to erase address 
+  * @param  Address Device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+  uint32_t deviceaddress = 0U;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send block erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+  NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+    
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;
+ 
+}
+
+/**
+  * @brief  Erase the entire NOR chip.
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Address  Device address  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Address);
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;  
+    
+  /* Send NOR chip erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+  
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+    
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Read NOR flash CFI IDs
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pNOR_CFI  pointer to NOR CFI IDs structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+  uint32_t deviceaddress = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read CFI query command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+  /* read the NOR CFI information */
+  pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
+  pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
+  pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS);
+  pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### NOR Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the NOR interface.
+
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Enables dynamically NOR write operation.
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Enable write operation */
+  FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); 
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically NOR write operation.
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Update the SRAM controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+    
+  /* Disable write operation */
+  FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); 
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_PROTECTED;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */  
+  
+/** @defgroup NOR_Exported_Functions_Group4 NOR State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### NOR State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the NOR controller 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  return the NOR controller state
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval NOR controller state
+  */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+  return hnor->State;
+}
+
+/**
+  * @brief  Returns the NOR operation status.
+  * @param  hnor pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.   
+  * @param  Address Device address
+  * @param  Timeout NOR programming Timeout
+  * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+  *         or HAL_NOR_STATUS_TIMEOUT
+  */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{ 
+  HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+  uint16_t tmpSR1 = 0, tmpSR2 = 0;
+  uint32_t tickstart = 0U;
+
+  /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+  HAL_NOR_MspWait(hnor, Timeout);
+  
+  /* Get the NOR memory operation status -------------------------------------*/
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        status = HAL_NOR_STATUS_TIMEOUT; 
+      } 
+    } 
+
+    /* Read NOR status register (DQ6 and DQ5) */
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6)) 
+    {
+      return HAL_NOR_STATUS_SUCCESS ;
+    }
+    
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      status = HAL_NOR_STATUS_ONGOING;
+    }
+    
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6)) 
+    {
+      return HAL_NOR_STATUS_SUCCESS;
+    }
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      return HAL_NOR_STATUS_ERROR;
+    } 
+  }
+
+  /* Return the operation status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
+          STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F413xx ||\
+          STM32F423xx */
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/