--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c	Thu Mar 07 15:06:43 2019 +0100
@@ -0,0 +1,788 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.c
+  * @author  MCD Application Team
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions 
+  *           + Peripheral Errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+           
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
+       to the Flash memory. It implements the erase and program Flash memory operations 
+       and the read and write protection mechanisms.
+      
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines. 
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) 64 cache lines of 128 bits on I-Code
+      (+) 8 cache lines of 128 bits on D-Code
+      
+      
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]                             
+      This driver provides functions and macros to configure and program the FLASH 
+      memory of all STM32F4xx devices.
+    
+      (#) FLASH Memory IO Programming functions: 
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
+                HAL_FLASH_Lock() functions
+           (++) Program functions: byte, half word, word and double word
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+    
+      (#) Interrupts and flags management functions : 
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Wait for last FLASH operation according to its status
+           (++) Get error flag status by calling HAL_SetErrorCode()          
+
+    [..] 
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the FLASH interrupts
+       (+) Monitor the FLASH flags status
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE       50000U /* 50 s */
+/**
+  * @}
+  */         
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+  * @{
+  */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+  * @{
+  */
+/* Program operations */
+static void   FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void   FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void   FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void   FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+  
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions 
+ *  @brief   Programming operation functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Programming operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH 
+    program operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program byte, halfword, word or double word at a specified address
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+    {
+      /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+    {
+      /*Program halfword (16-bit) at a specified address.*/
+      FLASH_Program_HalfWord(Address, (uint16_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+    {
+      /*Program word (32-bit) at a specified address.*/
+      FLASH_Program_Word(Address, (uint32_t) Data);
+    }
+    else
+    {
+      /*Program double word (64-bit) at a specified address.*/
+      FLASH_Program_DoubleWord(Address, Data);
+    }
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+    
+    /* If the program operation is completed, disable the PG Bit */
+    FLASH->CR &= (~FLASH_CR_PG);  
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+  
+  return status;
+}
+
+/**
+  * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+  
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+  pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  pFlash.Address = Address;
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+  {
+    /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+  {
+    /*Program halfword (16-bit) at a specified address.*/
+    FLASH_Program_HalfWord(Address, (uint16_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+  {
+    /*Program word (32-bit) at a specified address.*/
+    FLASH_Program_Word(Address, (uint32_t) Data);
+  }
+  else
+  {
+    /*Program double word (64-bit) at a specified address.*/
+    FLASH_Program_DoubleWord(Address, Data);
+  }
+
+  return status;
+}
+
+/**
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t addresstmp = 0U;
+  
+  /* Check FLASH operation error flags */
+#if defined(FLASH_SR_RDERR) 
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+#else
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+#endif /* FLASH_SR_RDERR */
+  {
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*return the faulty sector*/
+      addresstmp = pFlash.Sector;
+      pFlash.Sector = 0xFFFFFFFFU;
+    }
+    else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+    {
+      /*return the faulty bank*/
+      addresstmp = pFlash.Bank;
+    }
+    else
+    {
+      /*return the faulty address*/
+      addresstmp = pFlash.Address;
+    }
+    
+    /*Save the Error code*/
+    FLASH_SetErrorCode();
+    
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(addresstmp);
+    
+    /*Stop the procedure ongoing*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+  
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+    
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*Nb of sector to erased can be decreased*/
+      pFlash.NbSectorsToErase--;
+      
+      /* Check if there are still sectors to erase*/
+      if(pFlash.NbSectorsToErase != 0U)
+      {
+        addresstmp = pFlash.Sector;
+        /*Indicate user which sector has been erased*/
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+        
+        /*Increment sector number*/
+        pFlash.Sector++;
+        addresstmp = pFlash.Sector;
+        FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
+      }
+      else
+      {
+        /*No more sectors to Erase, user callback can be called.*/
+        /*Reset Sector and stop Erase sectors procedure*/
+        pFlash.Sector = addresstmp = 0xFFFFFFFFU;
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+                
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+      }
+    }
+    else 
+    {
+      if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) 
+      {
+        /* MassErase ended. Return the selected bank */
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+      }
+      else
+      {
+        /*Program ended. Return the selected address*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+      }
+      pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+    }
+  }
+  
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Operation is completed, disable the PG, SER, SNB and MER Bits */
+    CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
+
+    /* Disable End of FLASH Operation interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+    
+    /* Disable Error source interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Sectors Erase: Sector which has been erased 
+  *                    (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
+  *                  Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Sectors Erase: Sector number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    memory operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+    WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+    /* Verify Flash is unlocked */
+    if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+    {
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  FLASH->CR |= FLASH_CR_LOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+  {
+    /* Authorizes the Option Byte register programming */
+    FLASH->OPTKEYR = FLASH_OPT_KEY1;
+    FLASH->OPTKEYR = FLASH_OPT_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }  
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status 
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OPTSTRT bit in OPTCR register */
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions 
+ *  @brief   Peripheral Errors functions 
+ *
+@verbatim   
+ ===============================================================================
+                ##### Peripheral Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be a combination of:
+  *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag 
+  *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag  
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag 
+  */
+uint32_t HAL_FLASH_GetError(void)
+{ 
+   return pFlash.ErrorCode;
+}  
+  
+/**
+  * @}
+  */    
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout maximum flash operationtimeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{ 
+  uint32_t tickstart = 0U;
+  
+  /* Clear Error Code */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+  
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) 
+  { 
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    } 
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+  }
+#if defined(FLASH_SR_RDERR)  
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+#else
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+#endif /* FLASH_SR_RDERR */
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
+
+  /* If there is no error flag set */
+  return HAL_OK;
+  
+}  
+
+/**
+  * @brief  Program a double word (64-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V and Vpp in the range 7V to 9V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  /* Program the double-word */
+  *(__IO uint32_t*)Address = (uint32_t)Data;
+  *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
+}
+
+
+/**
+  * @brief  Program word (32-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint32_t*)Address = Data;
+}
+
+/**
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.1V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint16_t*)Address = Data;
+}
+
+/**
+  * @brief  Program byte (8-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         1.8V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_BYTE;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint8_t*)Address = Data;
+}
+
+/**
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{ 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+   
+   /* Clear FLASH write protection error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+   
+   /* Clear FLASH Programming alignment error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+    
+    /* Clear FLASH Programming parallelism error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
+    
+    /* Clear FLASH Programming sequence error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
+  }
+#if defined(FLASH_SR_RDERR) 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+    
+    /* Clear FLASH Proprietary readout protection error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
+  }
+#endif /* FLASH_SR_RDERR */  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+    
+    /* Clear FLASH Operation error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/